VOTOL hall angle self learn process

Here I show how to do self learning for VOTOL hall shift angle.

[@javierleandrovaronabombino4399]

Hello, my friend, your videos have been very helpful to me. I live in Cuba, and I have a workshop for electric motorcycles, where I use many Votol brand controllers. However, I don't have enough information to properly configure and adjust them for the motorcycle. It would be very useful if you could provide me with some more advanced documentation than what is available online.

[@jusubbidiy]

You should google: endless-sphere + Votol EM-100 & EM-150 controllers, there is lot of information about these controllers.

[@racko6ix]

Hi, I'm using a 48v vevor 2000w mount motor (my1020). SO the settings I see you got, they well for you I presume. I'm gonna try copy them because I'm lost wit mine. Maybe this will get me closer on track.

[@ramilh4279]

Спасибо!!!

[@danilopruna2271]

Good evening, I have a vorol m100 controller and it is not worth connecting a line so that the values ​​appear in a dk speedometer, what could I do to make it work, thank you very much if you could help me

[@jusubbidiy]

I don't use speedometer, but you can check out this thread: Post in thread 'Votol EM-100 & EM-150 controllers' endless-sphere.com/sphere/threads/votol-em-100-em-150-controllers.95969/post-1482126

[@mekanikrumahan4574]

hi sir, there are 3 value, why did you pick the last?

[@jusubbidiy]

I don't know, I just did 😁

[@samehdarawshi3537]

Thanks My motor up to half throttle working fine. After that wont slow down. Hall sensor issues?

[@jusubbidiy]

Maybe some settings wrong. I bet it has something to do with field weakening. Check this out: Post in thread 'Votol EM-100 & EM-150 controllers' endless-sphere.com/sphere/threads/votol-em-100-em-150-controllers.95969/post-1784975

[@samehdarawshi3537]

Thank you.will check it

[@district99]

​@@samehdarawshi3537 Did u solved the issue?

[@samehdarawshi3537]

I foind i have faulty hall sensors. Replaced lately. will check performance soon

[@district99]

@@samehdarawshi3537 so, youtube Change the hall sensor ini bldc?

[@christianpaulroldan4010]

Will it learn also the pole number?

[@jusubbidiy]

No, you have to tell it manually.

[@christianpaulroldan4010]

@@jusubbidiy ok ok

[@TXPer]

Hi i got problem with my controller, hall fault always appears after powering on, signal from hall sensors come to votol and votol display RPMs, but wont run. I have 2 errors: hall fault and controller failure. Any ideas?

[@jusubbidiy]

I think that hall error can be also triggered nyt voltage limits of throttle. You should measure voltage with multimeter and adjust limits. I also recomment to disable park option.

[@TXPer]

​@@jusubbidiyok i figured that out, my controller works only with one motor (qs273), but doesn't work with other brands motors, on qs everything is completely fine

[@anthonyC193]

Hello, does it work for all models? mine doesn't work

[@jusubbidiy]

I'm not sure. I have em-30s

[@gopro2549]

Thank you.

[@mct8888]

I tried this and now my bike won’t stop accelerating after twisting the throttle and letting go.

[@jusubbidiy]

You can always change hall angle back to were it was.

[@heydarfernandezcapote804]

@@jusubbidiyhola he intentado y no me funciona me podría explicar como hacerlo o en otro puerto porque en ese no me funciona

[@samehdarawshi3537]

I have similar issue Did you manage to find a solution?

[@mct8888]

@@samehdarawshi3537 I did find a solution, but it’s for my specific Mototec motor. What kind do you have?

[@djjays1dnb]

​@@mct8888hi. What setting did you use for the mototec pls. I'm struggling to find a good setting for my em50sp. Don't think my hall angle is set rite. The reconnect method is not making any values change when reconnecting. I have a neo outlaw with 1600w motor. I can't find no info on the cs motor. Thanks

[@GraphicFrost]

What is the point of doing this?

[@jusubbidiy]

If you don't know your motor hall angle, with this process you can find it out.

[@JackTheRipper-f4v]

This is not a good way to figure out the optimal hall angle.

[@jusubbidiy]

Ok, what is the good way then?