Secrets To Fixing Faulty Game Boy Games!

Follow me on Twitter! / voultar
Store Web-Site: voultar.com
Join me as I teach you the same techniques that I've shared with brick & mortar video game stores over the years to recover "dead" Game Boy cartridges as well as a lesson in replacing dead batteries that are plaguing these 20+ year old games!
★The following (affiliate) links are for the soldering equipment I used while making this video★
►T12 Soldering Station: bit.ly/2DtoywS $40.99 Coupon!! 257a98
►T12 Tip Collection: bit.ly/2Dvbln5 20% OFF Coupon!! 580dd8
►T12 Stand: bit.ly/2DtL3BK $8.99 Coupon!! 9b1d43
♫Music (In order)♫
DMG - Kirby's Dream Land - Title Screen 00:05
DMG - Mega Man V - Pluto's Stage 01:05
DMG - Super Mario Land 2 - Athletic Theme 04:06
DMG - Wario Land - Bonus Theme 01 06:50
VB - Mario's Tennis Tournament Doubles 01 09:50
VB - Mario's Tennis - Tie-Breaker 13:05
VB - Mario's Tennis - Results 16:17

[@thewackerly]

This video helped me repair a game I haven't been able to play in goddamn years: Game & Watch Gallery 2. It was one of my favourites growing up, but one day my scores were gone and the cartridge had a rattling sound. Years later I found the game and replaced the battery, but then it wouldn't play properly. The palettes were wrong, and the game froze when trying to play any games. Then I tried the technique shown in the video. Now it works perfectly again! Thank you so much for your wisdom!

[@niespeludo]

Cam here for the GB game thumbnail, subscribed for one of the cleanest and chilling soldering techniques ever. Seriously that was immaculate, soldering IS NOT that easy. Watching this was like watching Bob Ross with the soldering.

[@Voultar]

Thanks for the support!

[@Alpine_flo92002]

I just wanted to make a comment saying. "The Bob Ross of soldering" Guess you beat me to it.

[@paul_pratt]

Do you have or could you do a video about the various solder wire, flux, all the various soldering tips - the minutia if you will - of soldering that doesn't get talked about very much? I've spent a lot of time learning to solder, bought a Hakko station, refurbed a lot of games, brought some consoles back to life, and done some console mods but its these little things that don't get talked about very much that I'm curious about now. Are there things I could be using that would improve the quality of my work? Maybe a small set of go-to items I could stick in a toolbox that would be good items to have in a "console repair kit." I don't run a business, I just want to take care of my stuff. I think also a couple of videos on analog electronics... "electrical information" would be interesting too. Maybe explaining resistors, capacitors, how and why they do what they do, choosing them for projects, etc. I'm obviously not knowledgeable about all of this, so forgive me if these are dumb things to ask about. I get what they do, but why a particular spec of a component may be used in each instance would be helpful? I know that this stuff probably exists out there, and I would gladly look at them if you have some recommendations, but I really enjoy your concise style of presentation. Plus dat sexy voice boi.

[@Voultar]

Sure! I think I can manage doing that, soon. ;-D

[@BooshmanLee]

I'd also really appreciate a video like this. I am looking at the soldering station you recommended in your last vid, and it comes with the tip you used here. The seller also has many other tips for sale individually, and knowing what each is used for and what might be useful to me would really help. Also any hints on what to do with a new iron to not fuck it up would be great. Proper procedure to make sure the tip will always accept solder, etc. I've used cheap irons before that have had solder run off them, which I'm ure was due to my error. @@Voultar

[@Wyatt_James]

I would love this as well. I want to know some good solder and no-clean, as I want to upgrade to some that flows better and I want to get away from rosin.

[@FrewtLupes]

@@Voultar Just watching this video has drastically changed how I approach soldering. I'm very new to doing modwork on consoles and carts and I would love to see a video like that from you too!

[@HybridDivide]

I'd like a video like this, too!

[@Sheevlord]

Great job, as always! Although I personally prefer to wick up all old solder from the pads with solder braid before soldering new components. Makes it easier to position the components and removes an unknown variable (old solder and its properties) from the equation.

[@leopardleopard521]

Every time after I watch one of your videos and see you zoom in when you work I think everything is very big, but when I go and work on some mods I am amazed at how small these things are. And realize the amount of effort you put into your videos and work. thank you so much for your hard work.

[@T0phen95]

Love what you do. I want to get into the business of component level repair/modding myself, and you are a key inspiring person.

[@dwarf365]

Sweet! New Voultar Vid! Thank you sir!

[@DStabs720]

You make soldering look so easy!

[@MrMario2011]

I'd definitely be interested in a save data backup video!

[@DatKogasa]

Remarkably, I just pulled out my old gameboys from a box while looking for a liquid cpu cooler and decided to give them a go on Thrusday, the day you uploaded your video, only to find one of my old Pokemon games with the same symptoms as yours did. Thank you for showing this content, as I will be using it in the near future to restore my game back to working status.

[@CAMintmier]

While you have the cases open, might be a good idea to clean the connector pins. Most of the time 99% isopropyl alcohol works fine. It's what pretty much every cleaning kit came with, and what the 1UPcard comes with. I've never had to use it, but for really tough cases youtuber John Riggs uses either Brasso or Brite Boy metal polish. He's got a whole Open Cart Surgery series, so it must work for him...

[@TheRetroRoundtable]

Just say no to Brasso!

[@Voultar]

Absolutely. You should always clean your games.

[@TightPantsJack]

If your game isn't booting, the truly FIRST thing you should try is cleaning those contacts on your cartridge. 😋

[@xxxLUKRASsxxx]

Blowing into it helped almost everytime back in the days

[@TheBigupz]

@@xxxLUKRASsxxx that creates moisture and speeds up dmgin them actually

[@trevorc4413]

I've done this a lot. In more detail: Step 1: rubbing alcohol (99% pure is preferred) + q-tip. This is nice because you don't even need to open the case. Step 2: Eraser. Open the case, rub the contacts with an eraser. (If at all possible, use an eraser that's not actually in a pencil, as you don't want to scratch the contacts with the eraser holder.) Step 3: Brasso. (This might damage the contacts slightly, so this is only for carts that still have visible issues with the contacts after the first 2 steps have been repeated a few times. 99% of non-booting carts just need the first 2 steps.) Rub brasso on the contacts. Make sure to clean it off afterwards. (Distilled water, then dry it off.) Step 4 is the stuff from this video.

[@Voultar]

@@trevorc4413 You should never rub brasso on your game cartridge contacts.

[@trevorc4413]

Do I need to put more warnings on it? Look, Brasso isn't great, but I don't have a better solution for when there's obvious problems with the contacts, and an eraser isn't helping. Rest assured that I only use it when the alternative is to consider the cartridge unrecoverable.

[@OcarinaN64]

Great vid! I just got in a box of GBC games and around 1/3 of them needed the SMCs resoldered. All but one work now.

[@tomwood5706]

Some seriously satisfying soldering again Voultar :)

[@Xinaseason]

Hey man, just wanted to thank you for making this video, took the same steps you showed us and was able to bring my pokemon yellow version cart i just purchased back to life. This was definitely a big help compared to all other videos I've watched, I was so lost. Thank you for making it so simple.

[@Fulthrotle73]

Nice video. Keep em coming!

[@zquall]

Love it!, Thanks dude! you are the best!

[@Gecko1993HogheadIncOfficial]

This video was uploaded on my Dad’s birthday! Thanks, Voultar!

[@carmineacciai1087]

I have to admit, I am super interested in dumping the memory on a gameboy cartridge before it goes sour. Your channel has really helped reignite an interest I had in electronics repair in my late teens, thanks for making great content dude.

[@aaronveneruso2214]

Great video :) and clean job ^^

[@ahmedp800]

Man love you videos ! Very relaxing

[@cathykyle525]

Thank you so much for the wonderful video!! Finally, a solder video that's easy for beginner me to follow :) Hopefully I can revive my broken FireRed game!

[@jcreazy]

You make soldering look so easy. I can never get it to flow that good.

[@Jackpkmn]

The answer is typically more flux. Remember you can clean it off after so be generous.

[@danmackintosh6325]

And not forgetting a good lead/tin solder, but yes flux is the main key even if you insist on lead free.

[@GreNadeMusicNL]

A soldering iron with good thermal mass is also a blessing

[@danmackintosh6325]

This is true, I'm between a rock & a hard place in that respect at the moment as I have only a needle-point tip for my 907c iron & a knife edge on a 40W thing I use more for automotive wiring. Need to get me some chisel and knife tips soon.

[@Tylerjrb]

I have an antex 120w with the 2.4mm df tip and works wonders for large contacts like this. Melts in seconds. A good iron can make all the difference as i used to have a $9 piece of garbage that couldnt melt anything.

[@jonnielsen547]

This was an eye opener. The reflow trick is brilliant. I've already done it to two games that weren't really working reliably, even after replacing the dead battery. Thanks!

[@Reckoner89]

Dude, this is your first video I had the pleasure of watching, and I gotta say, that was tremendously zen. You're a bit like a Bob Ross of soldering. Keep it up!

[@burningheart2909]

You're like the Bob Ross of vintage game repair 🤓 Thank you for the demo!

[@darkshippo]

very beautful joints! Finally someone who knows how to solder.

[@TerrorTales4271998]

love you videos brotha really tot me the right and wrong of soldering ps love your what soldering iron video to buy i picked myself up one of them nice stations you suggested

[@LayneRuley]

I subscribed when i heard "This substrate is quick thin, let me get my calipers..."

[@James-nj8gx]

This video needs more hidden gems. Thanks for the vids man.

[@thedarkdragon89]

I was wondering about putting another battery in series while I do the swap. This was good and informative, thanks!

[@Consolethinks]

Hey Voultar! I've recently finished my first ever PS2 modchip install using some of the tricks you showed in your PS2 modding video. I've had a lot of difficulty with the solder points being so small and close together, so in the end the wire work did not turn out to be as good as yours, but it was still decent enough. Anyways, thanks for making these videos!

[@Voultar]

You bet!

[@e2622]

Damn it love your videos. Wish there were more of them.

[@stage1]

Voultar can you please link the battery, from where to buy, as i can see Toshiba brand, most of the ebay are unbranded and wont last 2yrs

[@ZiggyTheHamster]

This one is genuine Panasonic, but it'll work just as well: www.digikey.com/product-detail/en/panasonic-bsg/CR-2032-F2N/P657-ND/2404062

[@DuelingDragonAdventures]

Console5.com has the 1616 Panasonic batteries, they also have the Renata 2025s, which I personally use because they are bigger and last longer.

[@ZiggyTheHamster]

But a 2032 has 20% more capacity, is far more ubiquitous, and fits, so why use a 2025 (or 2016 which has half the capacity)?

[@ZiggyTheHamster]

Brain fart, I meant 1616.

[@DuelingDragonAdventures]

@@ZiggyTheHamster Voultar shows that there's not a clearance issue with a couple of games, but I still use 2025s just to be safe because I don't want to run into that one game that won't close. Don't plan on changing the battery again within the next 10 years anyway...

[@Retroaria]

Thanks, I will try. How about use the old connector and just change the cell battery, is it possible?

[@darklord-bx9wx]

Thanks for showing me how to fix my old games

[@guspaz]

I love watching soldering almost as much as I love soldering... Cleaning the cartridge contacts is a good idea when you've already got the thing open. No need to get fancy on a game that's already working, just a q-tip and some isopropyl.

[@mouaxiong8618]

I still remember keeping my game boy on for like half a year just because Pokémon gold doesn’t save for me

[@RaimarLunardi]

some serious mature content here I see... 4:15 lol

[@RanaRandom]

oh no, my brain :D.

[@austinsalkowski]

7:16

[@Opethbloodbath666]

Uuuhhh

[@user-ko1qo7qw8r]

MORE....I NEED MORE VOULTAR!

[@xT0K0x]

This is so interesting snd kinda cathartic to watch :3 Thank you for sharing. And coincidentally these are the exact two games of mine that stopped saving! It's too bad I gave them away 2 years ago since I figured replacing the batteries would be too complicated. Oh well, lol

[@andipajeroking]

Thank you. I fixed my cartridge using your guide. Cheers!

[@kodoyama]

Does your battery advice also apply to Super Famicom carts? I just ordered one of the KSGER T12 soldering stations that you recommended, so I can start learning to do my own repairs. I have a brand new PC Engine GT that needs re-capping, but I'll start small and work up to that.

[@generfeld]

fantastic video. My Links Awakening DX save battery from 1999 is still going strong. 20 years almost, its crazy

[@Sypaka]

That's because LADX has no RTC clock.

[@generfeld]

Makes total sense- true. thanks @@Sypaka

[@EmoKillsBest]

I'd love to see your overall set up. You seem to have a pretty organized area for the most part, so I think it'd be cool to see your work area. What kind if mat you use, how you have things stored, etc. Just an idea.

[@frankg7707]

Thanks for the video!

[@208Concepts]

I always wondered why my copy of Silver would randomly corrupt my saves. At the time, I didn't know about the battery 🤣. Now, if I can find it, I can fix it.

[@matzo33333]

Have you ever looked into replacing the SRAM chips with non-volatile FRAM? IIRC it doesn't work very well on games with an RTC, but non-RTC games work flawlessly with the mod. The chips used are a drop-in replacement, same pinout and everything, and it also works with first-party N64 memory paks.

[@arob_3k]

I'm trying to do this to fix it up Pokemon yellow cartridge and it's my first time using a soldering iron so I have a few questions. When you're reflowing what temperature are you setting your side or iron at? And also for the no clean what's a good option on Amazon?

[@sunky2661]

Nice video. Am I able to use a cr2032 on gba games that use a cr2025 or will it not fit??

[@plasia]

I love the idea of saving your saves, do it for other carts too!

[@ryans600]

I'm looking forward to seeing the update to this for the save data!

[@josephshin9297]

Thanks for making this video. I was trying to figure out how to replace the cr1616 battery in my Donkey Kong Land 1 cartridge with a cr2032 and you showed it brilliantly. However, the batteries I have don't have a yellow edge or the tabs already on the battery. Can I just heat the tabs on the old battery with my iron and re-use them with the new battery?

[@Voultar]

I would be careful. Your coin battery might be made of something such as nickel, so that won't work very well. You can easily find these CR2032 batteries on E-bay for very little money, I'd just grab one. ;-)

[@Eight-Bytes]

My copy of Pokemon Yellow has an issue when booting, the Nintendo logo appears, but then afterwards I just get a white screen. So I reflowed the rom chip like Voultar said, but it looks like it still didn't fix the issue. So I went ahead and just reflowed everything else after that, and it still didn't fix the issue. Any chance there's something else I'm missing? Contacts on the cartridge are good as well.

[@mohammedgamersc9572]

Hey I wanna ask you some thing , so recently l gave my gb games to a technician, they fixed the battery’s of the game but it was the wrong battery he replaced a Different one (CR 2032 ) so it is not saving , now should I give it to him and tell him to put the right battery again or will that harm my gb game

[@mUbase]

Thanks Voultar. Youre lovely. x

[@rogeliop]

omg! I didn't have much faith on fixing my copy of super mario land 2 but just reflowing the main game chip, fixed it! thanks a lot!!

[@nonchip]

do you recon I could replace one of those batteries with a supercap and let it recharge from the gameboy? do you know the power draw while it's keeping the ram alive?

[@javii5326]

Is there a way to “reflow” or fix the contact pins?... I have a DS game that has some very visible connector pin damage so I have to really struggle to boot up but it does myb one out of 20 times..

[@avrel820]

Simply amazing

[@clizzle19]

Hey man i know this video is 2 years old now. But i found this as i searched repairing gameboy games. I have a game that doesn't load in gbc and my dmg but it does load on my gbp but it either freezes or just fades out at the menu screen. Any ideas? Would reflowing the chips fix it? If so. What temperature should i set the soldering iron at? Thanks

[@stimp3413]

@voultar what desoldering tool do you recommend? Good quality but as cheap as possible similar to your video about high quality cheap soldering station

[@EctoJoe]

This just saved my copy of TMNT 3 radical rescue. Thank you!

[@Krankie_V]

I need to reflow the solder on the HDMI connector of a graphics card that I have, and I'm nervoud about bridging the pins since they're so close together. how do I avoid this?

[@earlspencer7863]

Use good flux and don't put too much solder on tht tip

[@gregorydougherty]

You have a solder ball on the insulation wrap of the battery in your Pokemon red. With enough force that could dislodge and start bouncing around in the cartridge. Just looking out for your childhood cartridge.

[@CaelThunderwing]

Have you been able to revive carts that certain clone systems have "Destroyed" ? (using a Retron5 w/ the Gameboy Camera will damage the Cart,what it shorts i do not know outside potentially sending too much voltage, but i had mine kill a GB Cameraafter the second use)

[@drdax]

This is some amazing stuff for someone looking to get into electronics. How did you learn how to do this stuff?

[@tigwelders-1076]

Where did you get the Toshiba batteries? I have found Chinese off brand and Panasonic but I could not find Toshiba tabbed batteries. Also is it possible to add tabs to a 2032?

[@phoenixrestorations315]

Do you know anywhere to find battery holders that would fit into the gameboy cartridges? It would be nice to not have to solder every time to needs a new battery

[@mattmill7892]

good stuff man

[@gopedxtremeridebmx672]

Hi can you refer me to some options of where to get the right no-clean

[@durstroyer3924]

More, we need more!

[@adventureoflinkmk2]

Yay, more ASMR repair videos!!!

[@levelupdelivery9504]

Lmao I’m watching this at night about to go to sleep. ...decided to check out the comment section well Worth it

[@levelupdelivery9504]

@TheGame455 lol one of my best sleeps ever

[@noy1826]

Was the battery on the pokemon red cartridge put in with the reverse polarity.

[@poisonshift78]

You sound like the Bob Ross of soldering, it's beautiful lol

[@YuzolainYuzolain]

happy little solder joints =)

[@justawfulgamer7738]

Came to comment the EXACT same thing.lmao

[@Twintania]

For games with dead batteries I have a local game store I go to that will replace the battery for around $5 a game, saved me planety of times. The only time they couldnt fix a game was a copy of Super Mario RPG since the battery tabs had loose solder so even a new battery wouldnt have helped

[@inputfunny]

What do you mean loose solder?

[@mllarson]

Had no idea those batteries came with the tabs pre-attached. It's been awhile since I opened an NES game but do those use the same tabbed battery? Do you get them from DigiKey or something?

[@Ozz_Derovar]

I've seen ebay and amazon selling the ones with tabs.

[@RemyS81]

Quick question, I know this video is older. I have Resident Evil Gaiden GBC and it boots and starts, but once I get past the beginning dialogue the game crashes. Is this something this is fixable or am I out of luck. Thanks and love all your videos.

[@MinimumOverkill]

This video is very handy and informative! That's cool that you can straight-up swap the old GB cartridge batteries with new ones of better capacity. Do you happen to know if the workflow for replacing a SNES battery would be similar to this? I have a few RPG carts lying around like FF2 US that are long past dead now

[@Voultar]

It's pretty much the same. Although SNES carts have batteries that "poke" through the PCB.

[@TechX1320]

Very cool video. Never knew this stuff was that easy. Archiving data from a game is very easy though. I actually have a device I found on ebay for 5 bucks that's flash memory and can hold 5mb worth of saves (or something like that). It looks like a Gameshark Pro... although those Gamesharks can do that too. I have had the same game save for quite a few years with a dead battery that i just haven't changed yet

[@jakeiswayblack3377]

Yo I just fixed my copy of Legend of Zelda: Oracle of Seasons that has been dead for over 12 years today thanks to this vid! It was indeed a lifted pin on the rom chip

[@lucasmills1246]

oracle of seasons/ages is underrated and overshadowed by LA. Great video!

[@jimbos-sen1077]

If you have a cartridge that needs a new battery but still works and has precious saves on it, get a smaller third battery and temporarily solder it to the areas of the board that the old battery connects to until you are done replacing the main battery. This should keep the cartridge clock running and game files in memory safe

[@inputfunny]

I think that'll work; also you can have it turned on in the Gameboy while you solder a new one in; that way is probably more risky though; with burning the Gameboy or accidently turning it off.

[@TooFurious4]

Thanks for explaining the date code. I bought a copy of Pokemon Yellow Version off eBay with a "New" battery ant it's the original 1999 battery.

[@DouglasThompson]

Nice!

[@foxracing742]

Even though flowing the 1 chip fixed the problem would it still be good to reflow the other ones just to make sure everything is throughly connected? Or just a waste of time?

[@troutsoup]

you're the Bob Ross of retro game repairs!

[@Mobin92]

How much space is there left in the cartridge? Would a battery holder fit in it? I found the BU2032SM which is 5.3mm tall. Sounds a bit much.

[@BlazingKhioneus]

Any tips for a game that doesnt save even with a fresh save battery? I have a copy of Pokémon crystal that refuses to hold a save despite the SRAM being intact. I presume there's a broken trace on the back severing the battery from anything on the board.

[@xXPliskinXxGer]

Hey Voultar, I have a question regarding the fixing of pokémon blue edition. I m not sure but aroung 2003 or like that id played with the pokemon game of my brother. When I learned unavoidable of Missin no. I abused it a lot, but then the Game stoped working properly. Evertime I enter a conservation with anything(also pc,item and so on) the speechbubble displays something random out of the memory(i suppose) and plays random pokemon sounds. After that the Game soft locks. Even starting a new game bring up the same issue with Prof. Oak. Current day: Now when I happend to watch your videos and saw this one, I tried to hard reset the memory with shortly removing the battery. Now the save state is gone but the issue is still occuring. Im quite confused, because I thought everything will be back to factory state. I would be thankful for your help, if you should see this :) Btw it is an german copy of the game.

[@Zelmarked]

What's your thoughts on using the stove method for resoldering? Good enough?

[@ShiftNBXX]

I have a question and what do you know is about a Pokemon game, well the game is unplayable, it boots but has so many graphical glitches, do you this applying the same method you did on Pokemon Red will solve the issue?

[@jeffriffo8915]

my man can you help fix my portable Turbo Graffix 16?! Its a Turbo Express with sound that doesnt work and a pink screen only when cards inserted! Friend dropped it in 97' would love to have it working. HELP!

[@Bemijaminji]

I have some non-booting carts to try to revive now, Aladdin and Desert Strike I think. Thanks for the video

[@ConnorR.mp3]

1616s have an average capacity of 50mAh, while 2032s have an average capacity of 225mAh

[@RepoDraghon]

I have a Pokemon Red version that boots but halfway through the intro the game freezes, also freezes when selecting continue, is this indicative of that Chip on the board is faulty too? or is it cause I used an Action Replay on it and it got reprogrammed and now I'm screwed?

[@Voultar]

Absolutely. An address line could be floating.

[@ccc822007]

Voultar is the Bob Ross of classic console fixers.

[@crappyatlife]

Wow haven't seen that comment 5000 times.

[@dannyjackson4294]

Have you done the battery change process with the cartridge inside a gameshark for easy access to the battery?

[@Deltax5]

Wow. nice video. Iv been just cleaning the contacts with mr clean magic eraser. I later got those one up cards. Now i found out it's made solder joints.

[@shawndiehl1959]

Awesome I was able to fix NBA Jam.