Vsr 6262 gen2 turbo

[@mopar2ya165]

I have the same turbo and ifvyou put the gasket on the turbine inlet you'll see the casting needs to be ground/opened up a good bit to match the gasket. I also blended the bolt embossments to blend into the exhast flow better.

[@general23cmp]

The Gen 2 6262 from VSR is a 66mm compressor wheel.

[@ruben.espino1180]

did you have an issue bolting up the hot side housing bolts ? mine are hitting

[@b.s.mboostedsuspectmotors5441]

Is this version jb or dbb?

[@voronwecalanon206]

On your ATI damper you did not say how you were able to hold the crank to torque it, could you please let know? My car is put together.

[@codeyjohnson9896]

I wedge a pry bar against the flywheel teeth