Adding a Limited Slip Differential into Our TSX Transmission

[@speedacademydave]

Watching Brian do LSD is surprisingly therapeutic!

[@VTECAcademy]

Expand your mind, mannnnnn.

[@ubergama30]

i love that no matter what random honda thing i look up out of curiosity, you guys have done it LOL

[@michaelbliss3452]

A full auto-manual diy would be everything for the tsx! Thank you for all the good content and info!!!

[@estewar03]

Last night's Live Stream was hilarious. Keep up the good work.

[@VTECAcademy]

Thanks! Will do!

[@teamaxlestands]

Thumbnail is 👌Just a quick one - i saw you reused the open diff ring gear to center bolts. The factory LSD actually uses different bolts which are slightly longer (about 6mm from memory). Not sure if it will matter too much but worth swapping them to the right ones if anyone else is doing it.

[@christopherhammond3664]

I think in past I've purchased new bolts to be safe.

[@bobbydelamar606]

My 1999 Prelude has a Quaife. My 1989 K24A2 CRX has a 6 speed LSD transmission from an SI.

[@VTECAcademy]

Nice! They really improve getting the power down.

[@johnconnor2402]

More TSX content yesssss

[@tunanocrustgarage]

Really miss ya'lls live shows. I keep missing the premiers.......all notifications are set. I

[@VTECAcademy]

Next time! We don't know what's up with the notifications. We really like the live chat during the premieres.

[@andybishop82]

What is about speed sensor gear on diff? Is it not same as ep3 gearbox? I am just going to change diff in my accord

[@chimworthiii1645]

Awesome walk through! I was wondering if it would be possible to just install the whole Si trans with LSD into the TSX? If so it might be a cheap option to get one from a junkyard

[@genezgate]

I have a 2006 Acura TSX that I use on the dirt track. Is there a LSD that can go in an automatic transmission?

[@JDMObsessionzPerth]

Where did you end up posting those torque specs?

[@thetruth7633]

Surgeon Brian at work 😊 What is your view on the lifespan of the bearings?

[@pehavens]

Can you do this to a j35y2 accord?

[@FinessedIt]

Shout out to the backup camera 👏

[@christopherhammond3664]

Wish he'd have used audio from primary cam. Backup cam audio was horrible!

[@davidmarshall6970]

Thumbnail is Sick

[@eduardopreciado3009]

I've been waiting for these videos. I'm doing the same to my tsx auto to manual

[@VTECAcademy]

Awesome, the manual swap then maybe a J swap for us.

[@eduardopreciado3009]

Keep me posted waiting for wiring video haha.

[@IntegraDIY]

Haha love the thumbnail 😅😝⚙️💊😆😆

[@VTECAcademy]

Thanks! Take a trip with GRIP! LOL

[@Jdmgeek]

Could I use d16y5 engine harness on a d15b

[@goforbroke2]

I’ve been sitting on a complete Si trans that I plan on swapping in the Si gears and lsd into my tsx once my stock 186K clutch gives up.😬

[@MotorSwapDan]

Love the thumbnail. Just bought a k20a2 on eBay. Should I get the head off before buying 86.5 pistons or do I just pull the trigger and buy a rod piston combo now in case there is back order

[@DriftyBits]

After autoxrossing my TSX this is absolutely almost required. Lol. Would love to get one and install it when I replace my transmission (currently have no 1st gear.... ) have to keep my eyes open.

[@VTECAcademy]

Good luck!

[@lobaman123]

I let a friend drive my 8th Si ONCE, he tried to float into 2nd and grinded the car to a halt while turning. I think my LSD or final drive is shot because sometimes it feels like its “slipping” while in a corner and lurches forward with some not so nice noises. Took it on some mountain pass curves recently and it did fine. Bummed out about it but I’ll check it once im done building my LS trans.

[@hondahobby6872]

I can help with any rebuild parts you may need sir. It is possible the Differential is damaged. We can upgrade to mfactory.

[@znulzndn6025]

Hi,Can i use a rsx selector on a tsx gearbox?

[@eg6-katmikhay164]

Hey I had a question kinda off topic… so I have a 02 Rsx S I got a nitrous wet kit so my question is how much nitrous can I run on stock Ecu without tune? What spark plugs would you recommend? Thanx in advance

[@lcq4blackstar]

Great information and vid! Question couldn't you measure the open diff and the lsd with the bearings on them as you did and measure their stack height against each other on the bench to know if the spacing was going to be correct before reinstalling it all just to measure with a feeler gauge? Also I presume the whole thing is going to have to come apart if the spacing isn't right? Does Honda sell the washers to take up said spacing? and where does it go exactly (guessing behind one of the 2 bearings)? Interested in a follow up video. I bought an M-factory years ago for my GD3 but got cold feet to do it myself and don't trust anyone to do it right so I sold it. Watching this video gives confidence BUT I have to know for sure I do it right! Looks like even a first timer (for the LSD) could pull the transmission and get it done and back in a day.

[@mzuvin5705]

I got a 94 accord with the f22b1 vtec. What do you think of that motor and what could I do to squeeze more power out of it?

[@huanbuilt]

I was researching online for a while, and i've read you must swap the tsx trans case to an accord 5speed trans case. can you please confirm if that it is necessary for an LSD swap on a tsx transmission. Thanks in advance

[@VTECAcademy]

No you don’t.

[@christopherhammond3664]

He obviously didn't swap cases. Can also confirm this isn't needed

[@alitoroganan2442]

Whats the budget friendly lsd for drag, cheers fam

[@VTECAcademy]

Welded diff on a dedicated drag car.

[@alitoroganan2442]

@@VTECAcademy gotcha, what about atb's are they any good for the strip

[@dannyaleman7869]

Is it possible to use a accord trans case with tsx gear set

[@craigwiess1656]

I would say yes, I used 2010 Civic Si 6th gear set in my 06 Element. One thing to watch for some of the main shafts use different size case bearings, I think it was around 2006 there was a change.

[@mickbrown8249]

Usa LSD Mfactory one on my 99'civic B16a2.. VTI cannot find Roterex Super charger 5yrs EURO & USA sites ..almost given up..

[@VTECAcademy]

kraftwerksusa.com/supercharger-systems/kraftwerks-b-series-black.html

[@robertforster5952]

Can I put in a 2012 to 2015 si LSD in my 05 tsx 6mt?

[@VTECAcademy]

Yes

[@nigelcollins5877]

So 06-11 si lsd will work in a 04 tsx manual transmission?

[@BeamRider100]

FB Marketplace won't let me search for Honda LSD.

[@lobaman123]

Hilarious thumbnail 🤣🤣🤣 DROP LSD AND DRIVE FOLKS

[@Goldenagehonda]

Gets a like for the thumbnail if nothing else :)

[@VTECAcademy]

Thanks!

[@BAMAJiPS]

Can anyone answer this question for me? I have asked on message boards and nobody has a definitive answer... been watching this channel and note that you guys actually tear everything down and compare different versions of engines. I have a 2008 Accord K24Z3 - I bought a replacement engine and couldnt pass up the super deal of a very low mileage 2011 Accord K24Z2 engine - not kidding $150 fully dressed with harnesses and everything. Super steal. I cant find ANY information on differences on the engines - I know the Z3 makes 11hp more - but nobody can tell me why - what INTERNAL differences are there? Does that 11HP come from TUNING and EXHAUST or is there something in the engine like cam specs??? Ideally I want to drop the Z2 in my 08 Z3 engine bay and hoping it all works out - but I wish I KNEW before hand. (After this Im going back to my A series K24's though! HA!) Appreciate any knowledge here.

[@BAMAJiPS]

I realize if the engines were identical then they wouldn't need a different designation - just wish I knew the difference in Z2 and Z3 internally

[@VTECAcademy]

The K24Z3 has slightly higher compression ratio and it revs higher. Also the Z3 came on cars with a higher flowing exhaust.

[@H8HotWeather]

someone start a gofundme to help them move move away from wired impact wrenches 😂

[@VTECAcademy]

Thank you!

[@정민-x7r]

😁👍

[@VTECAcademy]

Thanks!!

[@dundizzle93]

As soon as I saw you pull out the Tekton torque wrench I was waiting for the moment you tried to put the case bolts back in. Love my Tekton but the one way operation is bizarre!

[@VTECAcademy]

LOL You should have given us a heads up!

[@hondahobby6872]

Needs accord casing. 🤝