VW/Audi fsi 2.0T EA113 Cam follower replacement DIY

Step-by-step guide on replacing the cam follower in you Audi a4 2.0T with the EA113 engine prevent fuel pump failure and avoid costly repairs with this detailed DIY tutorial
Avoid these symptoms Intermittent loss of power under boost conditions, Misfiring, Fuel cutting out engine stalling or not starting, P0089, P0087, P1093, P2293
List of tools needed (affiliate links below)
17mm stubby spanner
13mm + 10mm spanner
Torx 30
Ratchet with extension bar
Rag or blue roll
M5 spline
Gloves and eye protection
A telescopic magnet in case you drop anything in the engine bay
Disclaimer: This video is intended for educational and informational purposes only. Modifying or repairing your vehicle should always be done with caution and following manufacturer guidelines. The creator is not responsible for any damage, injury, or accidents that may result from attempting the procedures shown in this video. Consult a certified mechanic if you are unsure about any steps.
As an Amazon Associate I earn from qualifying purchases there is no extra cost to you
All links below are affiliate links
Stubby spanner set
amzn.to/3ZmZ91L (Amazon)
Normal size spanner set
amzn.to/3XJZvhM (Amazon)
Ratchet and extension with torx and hex 1/4
amzn.to/4eubPIz (Amazon)
M5 spline 1/4
amzn.to/47xJpLy (Amazon)
Rags
amzn.to/3XMclMm (Amazon)
Gloves
amzn.to/4gw6IJt (Amazon)
Magnet in case you drop a bolt or tool
amzn.to/4ebPmAk (Amazon)
Magnetic parts tray
amzn.to/47rugLz (Amazon)
All links above are affiliate links