VW bug sway bar install (68 Volksrod Night Owl)

[@ilovec4s250]

Very nice video I'm installing the rear sway bar on a 73 super beetle makes my job easier seeing this

[@OFFAxisBuilds]

mega truck I’m glade I could help you. I couldn’t find any videos on how to install either the front or rear seat bar. So I thought I would make one.

[@bigalforsyth]

Put this same front sway bar on my 74...only problem is at lowest setting on the adj beam, this sway bar tips down enough to be a road scrape!!!

[@OFFAxisBuilds]

Forsyth HotRods that’s too bad. I hope I don’t have the same problem.

[@bigalforsyth]

@@OFFAxisBuilds what exact clamps did you get? I may need to adjust mine and really hate dealing w/ the stock style swaybar clamps. thanks

[@OFFAxisBuilds]

Forsyth HotRods I actually ordered some hose clamps that I got off of McMaster.

[@termike55]

do you need longer bottom shock bolts for the brackets? Thanks

[@OFFAxisBuilds]

yes you will need longer shock bolts. i think they were around 4" or 4 1/2 ".

[@elkid78]

How much the sway bar help

[@OFFAxisBuilds]

Honestly I’m still building the car. I will do a full drive review when I start driving the car.

[@elkid78]

Because I am running one air bag on the front beam and is not stable

[@OFFAxisBuilds]

Not stable 🤔. What type of shocks are you running. I think a sway bar will definitely help some of your stability issues.

[@mederosgarage5973]

Tremendo video felicidades desde Puerto Rico, amazing video helped me congrats from PR

[@OFFAxisBuilds]

Thank you

[@carlosnox91]

Gracias x la.informacion acabo d adquirir ese oar de barras , haber que tal saludos desde Veracruz mx

[@juanduran5614]

que buen video compartiste para realizar en mi proyecto , muchas gracias ¡¡¡¡¡

[@leroyjohnson4774]

Is it possible to measure the rear bar for me? Looking for measurements from bend to bend, and from end link hole center to end link hole center on other side, as well as center of straight part of bar to the center of the end link holes (front to back of car). I am wondering if I can use this on a different application. Thanks

[@OFFAxisBuilds]

+Leroy Johnson I will see if I can get some measurements tonight.

[@termike55]

nice job!

[@OFFAxisBuilds]

Thank you.

[@kevinhamling1963]

G'day, Great video. Q. Once you changed the way the rear bar was meant to be installed what sort of pressure was on the bar when you pushed it up against the frame horns. ✌️

[@OFFAxisBuilds]

Honestly I’m still building the car. But as far as the pressure I couldn’t tell you.