After all the positive reactions at the Caddy meet…..it’s still going on in The Netherlands 😂. Great work, proper work and a real amazing result! Thanks and see you next time! Ah Ye! 👌🏼👍🏼
@dannywakeford45663 ай бұрын
That little O-ring mate goes on top under the little rocker 👌
@letsgogravel68833 ай бұрын
One of the best sbows on you tube,awesome
@francishagen85083 ай бұрын
Takk!
@sleepeasywithwhitenoise38603 ай бұрын
Mirrors and side covers look mint and spoiler looks amazing Nathen keep up this smashing work Regards Adam
@YTDTETV3 ай бұрын
Hey Adam thanks bud really appreciate that 👍👍
@Laura92A3 ай бұрын
Looks smart! Colour doesn’t seem a million miles out. The mirrors make such a difference too 👌🏼
@grumpidad3 ай бұрын
Another ‘Qualatay…’ episode Nath, Looking forward to the Hoodies & Jumpers when you add them to the merch store bud. Keep up the good work we haven’t missed any of your posts from day 1. Respect 👌
@YTDTETV3 ай бұрын
Hey bud the cold weather has definitely come in so hoodies etc will be coming very soon. Really appreciate the kind words and support 🙏👍👍
@stippleanddab36973 ай бұрын
that audi paint looked grim, its amazing how the mirror swap took years off. great video. love the longer videos.
@MarcBleach3 ай бұрын
All Maxi’s are twin slider brother John 👍🏼 nice work as always Nath Ah Ye
@YTDTETV3 ай бұрын
I never knew that mate, I watched a video the other day some guys overseas and they had a single slider maxi but I guess they didn’t make them over here 👍
@darranbond34483 ай бұрын
as usual loads of content sum good chit chat from top man
@bikersparky3 ай бұрын
Nice one ah ye! I had this issue with me old 2.5 AXE transporter and ended up getting the Darkside injector clamp done, proper pig of a job in that engine! If you squint it was mint until it all got put back together again ah ye!
@YTDTETV3 ай бұрын
Hey Jim I havnt worked on the 2.5 much so don’t know much about them. Dark side stuff is pricy but it is good stuff. Thanks mate 👍 I’ll email you very soon I have a gift for you 🙏
@neiljemmerson88263 ай бұрын
Nice work again mate, the rail covers make such a difference 👌
@paul54913 ай бұрын
Great video as usual mate.....cheers for the stickers!
@patrickdaly50543 ай бұрын
Brilliant video lads. Keep them coming. Loving it.
@karl39273 ай бұрын
Great work there Nathan and thank you for the video. Have to say I thought the colour match was really good.
@billsheehy16603 ай бұрын
Came out nice, as always enjoyed that. Thank You
@sean95953 ай бұрын
Sound job Nathan keep up the good work 👍🏼👍🏼
@Shrekeo3 ай бұрын
As always, cracking video. My 1.6 Maxi does the same on a cold start but only when the outside temperature is above around 12 degrees. Starts on the button in cold weather.
@jeffnoticАй бұрын
great vid bud
@ampz883 ай бұрын
Thank you for this episode! I've had injector seals for my bls caddy on my home office desk for the last 8 weeks. Your video gave me the confidence to tackle the job and I did it this afternoon! Took 2 hours and the caddy is now smoke free! I had 2 injectors which i think we're leaking into the cylinders and it was making a smoke cloud on startup! When i took 2 out (I think 1 & 3) no fuel fell into the bore. Which I think would mean they weren't sealing, would that be correct? Love your videos and humour keep up the great work!
@YTDTETV3 ай бұрын
Hey bud that is awesome hopefully is fixed your issue, it does sound like yours needed doing 👍👍
@archiebaldock54883 ай бұрын
As always another great tutition Nathan on the PD 👍 AH YE 👌
@miserablecherry76513 ай бұрын
Wicked stuff mate, looking forward to friday. ah ye!
@Weirdwebbie583 ай бұрын
Colour didn’t look too bad,squint and it’s mint,all the little add on bits definitely make the caddies look cooler 😎 Ah Ye! 🤙🏻
@YTDTETV3 ай бұрын
Hello, ye I was surprised considering it was a random pot of paint, rowan was happy so I’m happy 👍
@davidstocking16223 ай бұрын
Good stuff Nath. Sure the Caddy will be starting better after the next phase. Colour didn't look a million miles out on video.
@ragnarironspear17913 ай бұрын
Brilliant as always 👍🏻👍🏻👍🏻🇬🇧
@appelflapdrol3 ай бұрын
Would it be possible to get some measurements of the clearance you have with the swamper style wheels, and some specs on the rims and tire sizes specifically ?? Really wondering how big of a diameter wheel you could fit, as I'm currently repainting a set of 17" supertourismo's for the maxi adventure van Thanks in advance ✌️
@YTDTETV3 ай бұрын
Hey bud yes of course the next video on it with the wheels is coming up very soon 👍
@appelflapdrol3 ай бұрын
@@YTDTETV you're the man 💪 looking forward to the vid, thanks for the reply
@rowanblackwood13793 ай бұрын
@@YTDTETVah yeah
@Sheenmeemseen3 ай бұрын
❤ caddy power, I come here to watch you 😮😅
@ak-mo9vo3 ай бұрын
Quality work 🤙
@marcb53283 ай бұрын
Great video as always Nathan , trying to think back and use you fixed a bad starting pd by replacing the crank sensor wires ? 🎉
@jonbrookes773 ай бұрын
Great video 😎
@christinamacintyre99723 ай бұрын
Oh those wing mirrors are nice
@YTDTETV3 ай бұрын
They are very nice, think they about £250 so not cheap but definitely make it look better.
@dalwwoodhouse3 ай бұрын
Great caddy content
@bigdoppafreeman69923 ай бұрын
Cracking vid pal
@Nicovb19843 ай бұрын
Great episode Nathan, My Polo has the LB9A Candy White colour, Want to find out if the 1.4 AMF P2 engine seals the same as the 1.9 P2 engines to change the seals?
@Cormacmoore13 ай бұрын
How did the cheap gun fair out?. Tempted to get a few. For the price of them they can’t be that bad for base coating at least
@MH-jp7mh2 ай бұрын
The extra o ring goes in the top where the smasher goes in 👌🏽
@YTDTETV2 ай бұрын
Hey bud out of all the comments your only the 2 guy that knew where it went 👍 appreciate the comment and knowledge. I’ll stick them in the next time I change some
@andzonit43803 ай бұрын
Ah yeh! 👍
@deanbeeston45413 ай бұрын
So Nathan, if you have to much ibis white how much would it be to respray my VW golf mk7 from tornado red to ibis white?
@Blackbeard-19803 ай бұрын
Our BLS caddy has a starting issue, found the factory fuel filter housing non return was knackered fitted a used replacement was worse.. so used one off my Mk4 PD150 ARL & way better.!! As Caddy previously cooked a starter motor over 12mths of it getting worse.. done injector seals & loom new starter no better.. also found MAF had no thermal link although no faults.. Fitted a Hand primer but it exploded on Motorways.!!! So removed it, but the MK4 filter made big improvement,... but.. found the ECU has an intermittent 5V Fault where it's there 1 sec 0.08v the next.. also same 5V controls the Cam/Crank sensor plus MAF.. Fitted a 5V Battery into wiring via a switch U switch it ON Caddy starts straight up.!! 20seconds later 5V comes back again so turn off switch.. so got a replacement Immo off ECU to fit next.. Fingers crossed.!!! Then I need a Touran Fog bumper front end..
@YTDTETV3 ай бұрын
Blimey you have definitely been hunting for that issue 👍 a lot of info there appreciate your comment bud and hopefully your new ecu fix’s it for ya 👍👍
@93CostaCaddy2 ай бұрын
Great work. I've never looked at an ECU, but is it worth looking for dry joints on that 5v line? Judging by your fault finding so far I'm sure you can boss a soldering iron 😂
@plumpii71773 ай бұрын
Clean van.. 😎
@YTDTETV3 ай бұрын
It is definitely a good one to start with doesn’t need any bodywork etc just pimp and go 👍👍
@MrMac19863 ай бұрын
Hey DTE, great video, been thinking of doing this on my Golf for a while and this was good motivation. Question for you, my 1.9 TDI Golf 5 is an easy cold-starter no matter the temp/weather, but takes noticeably longer to start when hot. Also likes to smoke (white) on a cold startup, not sure if its related to the hot-start issue but anyway... The smoke definitely smells of fuel but I have no clue what could be causing it. Its not using coolant or oil, its not down on power, oil doesnt smell like fuel or increase in level. Its honestly stumped me for years would really appreciate your [or anyones ;) ] input on the issue. Just wondering too if anyone knows of any PD injector refurbishing places in the UK?
@dandanyeah53423 ай бұрын
Having issues with mine atm, 1.6tdi injection issues 😢
@Jimib893 ай бұрын
That spare o ring goes in where that tappet bit is
@YTDTETV3 ай бұрын
Sweet never knew that 👍 didn’t know there was one under there I will look on the next set, thanks bud
@MrRoyalbeersАй бұрын
im in the middle of this. wish me luck
@Castrotherapper133 ай бұрын
Nathan I got a 05 transit connect and 57 Suzuki swift , can you swap me for a caddy bro I do want to make a yellow replica of Dte’s red one 💪🏻🔥
@glenkellaway46643 ай бұрын
Looks good from my house nath ah ye😂
@YTDTETV3 ай бұрын
Ah ye thanks glen 👍👍
@MrJKS10003 ай бұрын
that include the sdi 1.9 diesel
@leejames36143 ай бұрын
Pukka as always mate
@t5jerry3 ай бұрын
I sent you an email mate about fitting my Skoda shocks for me, if you don't do private work, please let me know ?
@guy44693 ай бұрын
I cant wait untill you look like ALI, G, bling .
@serious6253 ай бұрын
ah ye😎😎
@ClementPatricia-q9e3 ай бұрын
174 Nedra Ports
@HB1113 ай бұрын
Gowan Nath
@ZackN-r8r3 ай бұрын
Ah year
@YTDTETV3 ай бұрын
Thanks mate
@ZackN-r8r3 ай бұрын
BLS
@YTDTETV3 ай бұрын
It’s is 😆
@rowanblackwood13793 ай бұрын
@@YTDTETV🤫
@paulcottier933 ай бұрын
Another great video omg i was proper into watching how you did the injectors great job on the paint work couldn’t tell looking forward to Fridays video AH YE 🤏🏻
@YTDTETV3 ай бұрын
Thanks Paul I was surprised about the paint match considering it was a random old colour. Fridays video is something a little different 👍