Your video was of great help to me when I took apart my cantac S which was broken. Thanks
@richardjohnson1413 Жыл бұрын
Is it as simple as replacing the old ignition lock cylinder with a new one (supplied with a key incorporating a transponder) or does it some how have to be coded into the car’s management system as well in order for it to work and start the car etc? Thanks.
@erlisnikolli2 жыл бұрын
My friend accidentally locked (OFF) my new ignition housing (he was testing it...will that make it so I cannot connect my ignition cylinder. My understanding is that they both have to be in the ON position. Thanks in advance for your response.
@pedroariza78922 жыл бұрын
I don't know if you noticed...both have to be in the on position the little tab in the back of the lock must line up with the slot in the ignition ...AND you must have the pin in there, with the tab depressed (watch the 5:00 minute mark)
@florianherbstmann35314 жыл бұрын
Danke. Sehr sehr hilfreich
@RobStevensRadio Жыл бұрын
Cant move key hence need to remove igntion
@davidbarossanu45734 жыл бұрын
my steering wheel is blocked and so i cant turn the key.. and cant
@davidreza56513 жыл бұрын
Did u fix it?
@timmythetooth25873 жыл бұрын
I had same problem but managed to take everything off with steering lock on wasn't easy though
@benaissab.28432 жыл бұрын
@@timmythetooth2587 ist das lenkradschloss beim entfernen des zündschlosses wieder entriegelt?
@Modern-Gladiator2 жыл бұрын
Hey mate, my ignition housing seems to be jammed as it won’t let me turn the car on. I’m currently looking for a Ignition barrel housing and my cars a MK5 2004 golf, Do the ignition barrel housings from later models (2005) or other older models fit it or does it have to be the original part for the actual car and model?
@RhysoDub2 жыл бұрын
I’m scrolling through the comments and have the same thing, mine is a 56 plate Mk5 so I’m assuming yours is a Mk5 as well. If so it needs to be the same but you can buy new ignition, the barrel and housing easily on the internet.
@vojtac76234 жыл бұрын
to jsem tušil že to nastartuje šroubovákem ale mohl to zkusit i bez imobilizeru
@alanphillips87207 ай бұрын
Ive repaired my ignition barrel but now the airbag light is on, will it go off with a 15 minute journey
@shamanmax79804 жыл бұрын
I have a problem . When you run the Golf 6 2.0 a deficit in engine rotation occurs. After removing the diesel temperature sensor the engine returns as it was meant with a good sensor switch. The problem remains only after removing the sensor wires
@ericoppel56988 ай бұрын
What do you do if pushing the wire into the hole does not release it?
@xiaomi29484 жыл бұрын
Also, dass mit dem Schloss rausziehen klappt ja gar nicht. Ist wie bei Türschloss wechsel. Schlüssel auf 11 Uhr drehen und dann mit dem dünnen Draht in das kleine Loch auf 11, damit es sich löst.
@raulalvarez8772 жыл бұрын
If you replece this one do you have to progran the new one Or it is plug and ply ?
@pedroariza78922 жыл бұрын
Keep that little black part with the key in it and swap it to the next ignition
@85krash3 жыл бұрын
If I get a cylinder from another car, how can I remove the barrel w/o the key??
@nerkis009 ай бұрын
Hi everyone, i had some problem with key lock stucked as everybody here apparantly and i managed somehow (by force) to turn it and now its working, but when i take the key out radio, headlights and dashboard are still working, did anyone had similar problem?? Thank you
@tonysitzia3684 Жыл бұрын
Thinks bro 👍🏽💪🏽
@tyjohnson74283 жыл бұрын
I got the barrel out, used a screwdriver with everything hanging out and now it won't turn over at all!
@bryantevis6680 Жыл бұрын
The barrel and the key are programmed
@marceloigorra91552 жыл бұрын
Thanks
@Honor-jm1dk4 жыл бұрын
Ux len jak vypnúť alebo oblbnut imobilizer 😂
@ggfilms96244 жыл бұрын
I took my key cylinder out and turned the buttom piece the wrong Way with a screw driver, and now the car is in steering lock. How do i get it out of steering lock now? I cant get the cylinder back in
@11217564 жыл бұрын
I have the same issue!
@trudibrown41524 жыл бұрын
GG Films did you figure this out plz
@michalknapek56974 жыл бұрын
This happend to me too :( I am afraid that it needs to be drilled out.
@grummet40974 жыл бұрын
Also
@michalknapek56974 жыл бұрын
So I finally fixed it. You need to take whole mechanism what hold steering wheel and milion screws. Not very comfortable and easy but this is probably only possibility.
@ramonperez72742 жыл бұрын
I need help my Jetta 2006 the Swuch not work
@Honor-jm1dk4 жыл бұрын
Frajer a dalo by sa to aj dajak inač hmm bez kľúča 😂
@kreshnikmorinaa4 жыл бұрын
Please please bay a camera holder plese
@rainemercedes1855 Жыл бұрын
What do you do if the key doesn't actually turn that far ? Will that pin still pop it out??
@KosaBrin Жыл бұрын
No! I have the same problem right now and cant turn the key. Looking fr a solution to disengage the wheel lock.
@bikerboy3k Жыл бұрын
@@KosaBrin same issue but my steering lock doesn't even turn on
@KosaBrin Жыл бұрын
@@bikerboy3k Well, I just fixed it. So if you need any advice...
@bikerboy3k Жыл бұрын
@@KosaBrin Dude yea. How did you manage to do it ?
@KosaBrin Жыл бұрын
@@bikerboy3k Well...turns out that my mechanism was f.uped. No way I could turn the key. So I took a flex and cut out the black key part (the thing containing the key code) and got a replacement part form a dumpyard for the rest. You have to take out the part that holds your key and replace it. In my case the aluminium ring got jammed. No way I could have ever turned the key. So if you are in the same position, get yourself a replacement ignition from a fucked car of the same type, cut yours open to get the key part out and replace it with the new one. You need to have the same key and lock or else your car wont start.
@kreditcomkredit54112 жыл бұрын
Find ich gut 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
@jimmywoo78754 жыл бұрын
Mine wont go that far forward
@iroczo66274 жыл бұрын
Bro, its not that easy, the spring inside wont let you put the clip so easy
@trudibrown41524 жыл бұрын
How to get it out please any idea its stuck so paper clip wont go all the way to release it