VW How To - Adjusting The Valve Timing Using Vas 611007

[@unitbeing1]

Is there any literature or material about repairing/replacing of an angle sensor if is defective? Thanks!

[@jtoni60]

que pasada de vídeo eso si que es una buena explicación una clase esquísita,pero una pregunta realmente hace falta todo eso para cambiar una correa de distribución ??? gracias

[@advtechts9247]

@Abbott Automotive while this is an exceptional tool it can not adapt to the belt stretch that will occur over time (especially during the bedding in period of a new belt). I fear that all of this accuracy during assembly will be lost in a short period of time?

[@stylus84razviter58]

Эти ремни не растягиваются

[@vaggelisgantzias]

Thank you, watching this video elsa pro seems more understandable ..

[@Techie1224]

seems easy and simple procedure 😂

[@ImplantedMemories]

German cars: You need to study, to work on them :D

[@louwscustomsza]

Any trick on how to check if the camshaft gears (vanos) are damaged or worn? I keep getting code P0011 & P0341 after changing sensors, oil control valves, magnetic adjusters & checking the wiring on my mk7 gti chh engine

[@BerettaTV]

Can the timing be set accurately enough with metal timing tools like you get in the timing tool kits?

[@AbbottAutomotive]

Can it be timed using just the tools? Yes. Can it be timed 'accurately' with just the tools? No.

[@BerettaTV]

So marking the old belt and transferring the marks to the new belt won’t work either?

[@repeater95]

@@BerettaTV it works

[@mr.t2585]

​@@repeater95it will work with marks on the belt but engine will never be timed correctly. Just like old ve tdi alh. If you don't adjust it right it will suffer in performance and burn more or less fuel. So this engine needs box of tools to time it right in other words never service it outside of vag dealership. 😂😂😂😂😂 regular mechanic can't do it right even if he have all the tools in this video.

[@avrracer4175]

Lol 😂 😂 😂 😂 VW really?? Thats not German engeniering!!! Its more complicated as possible....

[@JohnWayne-gl9ig]

At some point the special tool will have more value than the vehicle itself.

[@rajsohanda3450]

Hey there i have one question I have audi q7 3.0 2011 model Recently serviced and battery changed after few days car was unable to get motion once brakes were lifted Unless we hit the accelerator till 1500rpm then the car moves with a jerk And a engine and heater light blink once for fraction of a second And now rpm dips when hit the gas paddle in idel rpm with the same engine and heater light just for a fraction of the second Now car is with the service center for 2 weeks now with no fault code Please help 🙏

[@Liberty55555]

did they solve your issue ?

[@rajsohanda3450]

@@Liberty55555 not yet

[@gregbelial4613]

@@rajsohanda3450 at now ?

[@Justablokeonaboat]

Thanks.

[@gsoup7850]

What a palarva!

[@muratuzelli]

I have a 2020 model seat leon fr 1.5 tsi fr dsg vehicle, 105000 km, I am the first owner and I have been in trouble recently, the vehicle gives 2 errors. first ; P04F000 EVAP SYSTEM HIGH PRESSURE PURGE LINE PERFORMANCE, Second; INTAKE AIR SYSTEM LEAK. It was determined that the problem was caused by the valves in the engine, and some of the valves were burned or melted. Unfortunately, even though I had all the periodic maintenance done 2 thousand km ago, I encountered such a problem and the authorized service did not support in the country where I live. I don't like it anymore, probably because my next car will be the BMW f30

[@zumik83]

That tool is about $ 3.500.

[@zarkojekic4561]

Stupid engenering

[@scwarzewaffe85]

Typical VW rubbish. These engines are shit on fuel