Just bought this kit. Thanks for the video. Just know two years later you are still helping people!!!
@squalo777videos3 жыл бұрын
Thank you such much glad the videos help 👌😃
@Zimmie85486 жыл бұрын
Great vid...have done this myself with the same kit. Small tip, push the PCV valve in so that it goes a little past the end of the silicone, about 3/16". Then clamp it with the clamp flush with the edge of the silicone. This will stop the PCV valve from popping out and making a mess of your engine bay. I learned the hard way :-)
@Jwood15156 жыл бұрын
Every mod I've done to my gli have been guided by your videos bro. You do an amazing job explaining the steps.
@squalo777videos6 жыл бұрын
+Jeremiah Wood thank you so much for the comment man. This type of support inspired me to make more videos. And im glad the videos been helpful 😀
@yermo1305 жыл бұрын
@@squalo777videos I agreed with Jeremiah wood but definitely, you need someone that holds the camera and also get a good flashlight aiming whatever you're doing.
@gabrielteranrivas83634 жыл бұрын
Excelente trabajo hermano esa manguera como me hizo sufrir
@squalo777videos4 жыл бұрын
muchas gracias...
@ryanrhorer2055 жыл бұрын
I like how u put a screw into the t piece
@orchard_vids2 жыл бұрын
Thank you for making this video, it was super helpful! I wasn't able to figure this out from the instructions that came from 034 Motorsports, but found this video and got the job done.
@Silas_cv16 жыл бұрын
You’re really the only person on KZbin that do vw cars and that’s awsome I would love to see you do stuff to a vr6!! But anyways I love your videos !!
@squalo777videos6 жыл бұрын
+Deadman 25 thanks brother and as soon as a finish this car im going to buy a mk4 vr6 gti i l love the way they sound with good heaters and a good exhaust 😍😍😍
@Silas_cv16 жыл бұрын
squalo777 videos hahahaha yesssss broo lol keep up the great work!!
@squalo777videos6 жыл бұрын
+Deadman 25 thanks bro and i will
@woodyk51273 жыл бұрын
Thank u for posting this video as I have to replace all these breather hoses on my GTI also. I priced one hose at dealer and it was $103 so I end up buying complete breather hose replacement from urotuning for around $175. Waiting for the package to get delivered this weekend and will let you know how it goes. A small VW repair shop wanted over $400 for this work and glad I said no as it does not look too difficult
@squalo777videos3 жыл бұрын
And if you dig on ebay or Amazon you can find similar material for $50 the whole set. I'm glad the video help you I have way more videos with way more upgrades you can do to your car
@deebee97513 жыл бұрын
Thank you sir for that detailed video. You made this job look easy to do. I'm getting the CEL Code P0171 and I know its leaking from one of those hoses that you replaced. I'm going to order that same kit.
@squalo777videos3 жыл бұрын
im glad the video help you bro keep watching for more upgrades
@christianruiz85892 жыл бұрын
Just got the kit today , thanks for the guiding vid man your great!
@squalo777videos2 жыл бұрын
I'm glad the video helped you my brother 👌
@newbbeginnings56308 ай бұрын
this is the video i've been looking for!
@t.j.bennett64546 жыл бұрын
Thank you man. This is next on my list. Just did timing belt, and doing turbo inlet pipe tomorrow on my 03 TT 225 QUATTRO. Plan on doing a bunch more in the future bolt on wise. There’s so many hoses !
@squalo777videos6 жыл бұрын
+T.j. Bennett i know bro thats why i reallu want to clean as much hoses as i can and im deleting coolant reservoir and other stuff. I have a question since you have the 03tt 225 quatro does the videos i do for the mk4 really help for your car?
@t.j.bennett64546 жыл бұрын
squalo777 videos yes to an extent. There are a few things that I’m not sure of but since I’ve got the car I’ve read a million pages on the forums and watched a million videos on the 1.8t engine. For the most part it’s the same engine just stuff in different places so I feel like I know most of what’s going on. If I didn’t know my stuff then there’d be a lot less I’d be able to transfer from your videos to mine
@squalo777videos6 жыл бұрын
+T.j. Bennett thanks man. The reason i asked thay question its to see if i can add to the videos that this works for audi tt and audi a4 Thanks for the info man and for being part of the channel 😁
@masonpugh36372 жыл бұрын
Did a great job but it's so difficult to get those German clamps off without the tool and tight places but it can be done looks good
@bstevenson10026 жыл бұрын
So glad ur doing engine videos.. I also am trying to clean up my engine and also have a vacuum leak that makes me want to change all my line.. thanks man
@squalo777videos6 жыл бұрын
+Brandon Stevenson thank you brother i have another video ready not sure if i should wait to post it, its for the power stering reservoir relocation youll be amazed of how simple it is to relocate. Thanks for watching the videos man 😁😁
@bstevenson10026 жыл бұрын
squalo777 videos .. Post it, Post it! Lol there's many MK4 drivers out there I'm sure will come across it and help someone
@squalo777videos6 жыл бұрын
+Brandon Stevenson thanks bro im putting it toguether when i finish i will post it 😀
@FabioRodrigues-fe7zr6 жыл бұрын
God , I love ECS tunning and ur videos too, I'm from Brazil but I can understand almost all ur videos, I've an A3 T 180 tiptronic, very similar to ur engine tvm!!!!
@squalo777videos6 жыл бұрын
+slash snake thank you!!!!! 😁 im going to post more and more videos to help inspire people into working on their own cars. Thanks for your comment and for being part of the channel
@oldskulltrucker25734 ай бұрын
Thanks I figured out sht now
@Silas_cv15 жыл бұрын
Thanks man I just found out my pcv hoses are torn and cause a vaccum leak even though you can really tell but this helps a lot for when I do the sai delete
@squalo777videos5 жыл бұрын
+Silas_ Mk4 you are very welcome! Thank to you for watching and support the channel
@kenphillips4796 жыл бұрын
Your videos rock man keep them coming
@squalo777videos6 жыл бұрын
+Ken Phillips that really means a lot man thank you so much for the support man 😁😁
@halimhadjameur35856 жыл бұрын
U used the word, this, about a million times , remind me of old friend , good. Video bro , funny
@Kevin-wy8kc3 жыл бұрын
can you get smoke out of your tail pipe if that valve is leaky?
@jhonnysrivera20022 жыл бұрын
Dude did you do it and did it fix it?
@cerastreetart39293 жыл бұрын
Just got the same kit, install went okay but I noticed I had the same thing happen as you, the washer/gasket on the end of the breather hose doesn’t fit with the clamp. Did you run into any issues when you removed the washer? Awesome vid, thanks for all the info
@save34fry2 жыл бұрын
Thank you for the video. I do have a question about the hose 9:23 min, I couldn’t get the hose all the way in the one that connects to the top (it seems the hose is too short). Do you have a same problem if not how do you install it. Please let me know thank you.
@tomaszziomek43986 ай бұрын
Hallo, und wenn das, was Sie gekauft haben, erhalten geblieben ist, warte ich immer noch
@t.j.bennett64546 жыл бұрын
Squalo should I instal the 034 crank case pcv kit or catch can. Also there’s a tube going into the intake manifold off the pcv system that I don’t know what to do with if I do a catch can. If I took a video and showed you what I was talking about would you check it out for me and tell me what to do with it
@---bu6eg4 жыл бұрын
HELP: for anyone who sees this- what's the red hose at 2:49 going from the top of his DV to the little ... cylinder dome in front of his coil packs?? Is that something that's done AFTER doing an SAI delete? I'm making a fair amount of mods to my MKIV and I don't know how to find this one.
@south-eastmotormedia68914 жыл бұрын
I have just done the SAI delete to my mk4 golf and yeah its a hose running down straight to the inlet manifold, this is so it gets direct vacuum to the DV. if you run a boost gauge just T-piece from the FPR :D hope this helps
@henryzr235 жыл бұрын
Hi there man, thanks for your videos!, and excuse me but I have a vw jetta mk4 1.8T 'late' AWP and I´ve been told that the AWP engine has a different hose setup since 2004, could please confirm me if this DIY is for the late version of the AWP´s, or for the early ones? (99-2003), thank you very much for your time. Or if you´re not sure could you kindly confirm me from witch year is your Jetta?, thanks heaps man.
@angelortega53703 жыл бұрын
Hello! Thank you for this video! I have a GTI 2005 and am considering getting this kit Because my breather hose tore but I don’t understand what is the benefit of plugging the Vacuum line with this upgrade besides less hoses and a cleaner look? I can either change the breather hose and keep the vacuum line or do the upgrade since it’s hoses have never been replaced or upgraded. Is this something I should do? The car is completely stock
@squalo777videos3 жыл бұрын
If you trying to keep the car stock then this kit is recommended for you. But if you try to do more than just one upgrade you can start searching for emission delete or sai delete.. you won't need any of those hoses
@angelortega53703 жыл бұрын
SQUALO-777 Thank you so much, I am definitely relieved knowing this haha Im not sure what other upgrades I will be doing in the future but for now this should do! Thank you again!
@squalo777videos3 жыл бұрын
No problem man im glad the info helped you. 👌
@wranglercjseven696 жыл бұрын
Gracias elmano
@cconstantinof3 жыл бұрын
I'm installing a new 304 motorsports pcv hose kit just like yours. My lower breather hose does not fit because of a copperish ring - is that part of the crankcase? - I believe those are remainders of the oem hose - is this right? How can I remove it if so. Thanks in advance.
@liigth5943 жыл бұрын
Use a pick and pull it out,happed to me
@JohnSmith-gu3ub2 жыл бұрын
I priced these parts at the dealership and their quote was over $700.
@jaymepena26984 жыл бұрын
Did you have any trouble putting the c-clip back in?
@AmbA4 Жыл бұрын
Yup pain in the ass especially with this one
@jeronimovasquez9120Ай бұрын
Can someone tell me what car is this?
@EpilepticNinja242 жыл бұрын
How you took the broken Piece out?
@pulpanochamaster3 жыл бұрын
Nice vid! what is the benefit of installing this kit? thanks brother!
@squalo777videos3 жыл бұрын
Depending on your mileage you won't have to worry about vacuum leaks coming from that area
@djy127866 жыл бұрын
What year is your jetta?? Got to do the same thing to my 2005 mk4 jetta gli but ECS tuning website says it is the wrong part for my car...
@squalo777videos6 жыл бұрын
+djy12786 as far as i know the gli has the same pcv valve system try eurotuning brother
@geriatricginger6 жыл бұрын
block is crank case, fyi. good vid tho
@squalo777videos6 жыл бұрын
+Geriatric Ginger thabks brpther
@luiscarlosgomezcardona49995 жыл бұрын
Hello friend, can you please tell me which page or if with you I can get these updates?
@fernandobernal63146 жыл бұрын
Para que es esa válvula ???
@squalo777videos6 жыл бұрын
+Fernando Bernal eso nada mas es para cambiar el systema de plastico k le pusieron de agencia esk de agencia la regaron al ponerle plastico k se kiebra con el tiempo y despues hay fugas de aire
@braidonkeever93675 жыл бұрын
How did you take out that black peace out bc mine broke on the bottom
@BlitzRacing-3 жыл бұрын
How can I find that same one u got looked on ecu they got a different one ?
@juliocesar2009513 жыл бұрын
Donde puedo conseguir ese kit de mangueras, tengo un audi a3 2001 y no tiene esas mangueras
@kvacksilver52763 жыл бұрын
How is this pcv valve better than original? Would it be any good for someone who has not tuned their VW passat? (if thats the reason why, I dont know much about this stuff)
@squalo777videos3 жыл бұрын
They are made of silicone and its always good to change them bc originals are made of hard plastic that breaks with time.. its a good upgrade for stock cars
@g-track50653 жыл бұрын
@@squalo777videos where can I order this at? I have a malone tune and my plugs are fouling black will this help?
@jeronimovasquez91202 ай бұрын
You car is an Audi?
@milanperovic35925 жыл бұрын
I have a6 c5 with AWT. My question is, how can I remove all that shit with breathers recirculation and put just two hoses (one connected to lower breather, one connected to uper breather and fit those two below the car?
@marvincalderon74396 жыл бұрын
Nice video do you have a link where you get it from a have the same problem and if you have the part number thanks
Might this cause the problem i have witch is low engine pressure and engine knocking ? Thanks
@juliancotter42295 жыл бұрын
Your motor is probably blown buddy
@g-track50653 жыл бұрын
what is the itiem number and where can I get this upgrade system at?
@MFullaStyle5 жыл бұрын
Thank YOU !!!!
@g-track50653 жыл бұрын
Where can I order this ?
@SCARFACE-xi6qs5 жыл бұрын
CAN YOU TELL ME WHATS THE PART NUMBER OF THIS KIT YOU ORDERED?
@squalo777videos5 жыл бұрын
+SCARFACE 2000 look on Google for jetta mk4 silicone pcv valve hoses
@himaforlove3 жыл бұрын
👍👍👍👍👍👍
@larryweeks61985 жыл бұрын
Can someone show exactly where the pcv valve is on my 2004 gti 1.8t
@philmexreyes80815 жыл бұрын
Can you post a link where to buy those parts please
@marcogt5005 жыл бұрын
urotunning
@kdotktimetopurge85494 жыл бұрын
Where can we buy that from any links
@andrieschristie34155 жыл бұрын
Hi anyone.I got a audi a4 b6 18t.I urgently need some help.I don't know whats wrong,but sometimes my audi crank but won't start.No engin light is coming on.And all of a sudden its start again.Please help guys
@FreackDruid58524 жыл бұрын
M e puedes dar el número de pieza para buscarla
@eduardohernandez-tn3kq6 жыл бұрын
Que marca es lo que le haz puesto??
@squalo777videos6 жыл бұрын
+eduardo hernandez bienes de esctuning.com O los puedes comprar en eurotuning.com solo pon 1.8t pcv valve system
@bautistavazquez62956 жыл бұрын
U gonna do sai delete and emissions delete
@squalo777videos6 жыл бұрын
+Bautista Vazquez it was the very first thing i did to the car bro. So far i done sai delte, 550cc injectors, ecs dogbone, rota grits, stage 2 tune, power steering relocation, and a little cover for the coil pack harness. I did bideos for all this
@southard235 жыл бұрын
Can you tell us the name of the kit you bought please and where you bought it from
@goongoon92995 жыл бұрын
Go to 034motorsports.com
@t.j.bennett64546 жыл бұрын
@squalo777 hey dude I just uploaded a video of my engine bay for you so you could get a glance at what mine looks like
@squalo777videos6 жыл бұрын
+T.j. Bennett thanks for the video dude 😁
@cupra_1p1725 жыл бұрын
Would this fit on a 1.8t AUM
@tsaym07095 жыл бұрын
Golf Driver What a coincident going over the comment to see your recent comment lol. I have a 04 MK4 GTI with AUM engine too. It should fit. I’m planning to buy one from ECS tonight lol
@cupra_1p1725 жыл бұрын
@@tsaym0709 they dont have one especially for AUM i think
@cupra_1p1725 жыл бұрын
@@tsaym0709 are the other 1.8t engine how different from each other
@cupra_1p1725 жыл бұрын
@@tsaym0709 it would be great if they do
@tsaym07095 жыл бұрын
@Golf Driver I’m not too sure the differences between other 1.8t besides that extra nipple that sticks out from the valve cover where that Y-hose fits in. I’ve seen some installations that has that feature, but the rest looks the same.
@johnti86035 жыл бұрын
This piece, that piece, whatever, like .........ok
@srbincetnik015 жыл бұрын
Guys, can i just eliminate all pcv sistem from my audi 1.8t awt? Can i just connect low and upper breather with hoses and put them below the car? I have done this on many cars before, just dont know can i do it without consequences on this engine?