Vw T5 coil over suspension - maxpeedingrods

Have a little look at the maxpeedingrods rod website
www.maxpeeding...
Link for the suspension used
www.maxpeeding...
10% off DTE TV

[@karl3927]

Ah ye loving the look of your lowered T5 Nathan and thank you for the video. Big shout out to Max Peeding Rods for supporting the channel. Have a great weekend mate.

[@YTDTETV]

Hey Karl thank you mate 👍 thank you for watching and supporting. Maxpeedingrods have been great. You have a good weekend to bud 🙏

[@FatterTony]

max peed in grods you mean? Who's grods?

[@chrisbarber1187]

Every good mechanic reverts to instructions now n then! Nice one, loving the channel keep up the great work dude 😎

[@russrides1053]

I'm liking the look at these at this price point, thanks for putting it out here!

[@davidstocking1622]

Love it Nath. Feels like only 5 minites since the last suspension upgrade. Looks nice and low. Defo, defo, defo read the instructions😂 the rear adjuster goes on top, not on the bottom🤟🙈 upgrading the sway bars? Lovely Milwawkeeeee, very generous subby💪🏻

[@YTDTETV]

Hey David thank you and yep I now have a spare almost new suspension kit on the shelf, haha I thought about the instructions when I was editing the video 🙈. I left the adjuster out in the end, I’m loving the Milwaukee 👍👍

[@paullyons486]

Just ordered two sets for our vans cheers …enjoy your vids

[@YTDTETV]

Hey Paul that’s awesome I’m super impressed with them the ride is a lot better than expected 👍👍

[@oscarscomputersandgames4712]

Well done Phillip true gentleman 👏

[@YTDTETV]

Thank you mate he is a super nice guy 👍

[@Rob-qx1cu]

How low to go is a personal choice, massive thumbs up from a sill scraper!😂 great video bud

[@YTDTETV]

Hey rob 👍 they do look good sitting on the sills 👌, thanks mate

[@niceblokeray]

Cheers mate for the reply.....It may adjust once the front legs are replaced and I take it for another test drive.....Nice vids btw. 👍

[@conradhaigh2500]

Wow she is looking sweet, I think you have lowered it to a sensible height. You have created a beautiful van keep up the good work

[@YTDTETV]

Thanks Conrad really appreciate that mate 👍

[@michaelbirchall2247]

I've just bought my first T5 after watching some of your videos. I'll be watching ALL your videos now, and maybe bombarding you with questions too! Subscribed and thumbs up from me! Please keep up with the videos.

[@kevinrobinson5640]

Adjuster goes on top and the black spacer, use orange bush where it was originally

[@YTDTETV]

Thanks Kevin 👍

[@griffogriff9532]

Looking great 👍 nice to see max peeding rods getting involved again 👍 it’s great to see the channel growing, you’re smashing it

[@alexrutterford6358]

Great video as always Nath 👍 Would be interested to know the ‘centre of wheel’ to the ‘wheel arch’ measurement 👍🙏

[@MATTCHAR1]

Just ordered these on your review and subscribed spot on mate good content

[@gmmorley5369]

Thanks for all the videos you put out. Just wondered if the sound deadening under the scuttle made much difference. sorry if you have covered this. All the best mate.

[@Raymond-Gibb]

ideal, right in the door, kettle on and DTE. 🫵🏻🤜🏻🤛🏻 Happy belated birthday Nathan 🎉🎂

[@YTDTETV]

Thank you mate appreciate that 🙏👍

[@Weirdwebbie58]

Another quality video,T5 looks phat that low!! Definite improvement 👍🏻Ah yeah 🤙🏻

[@billsheehy1660]

As always enjoyed that, love the vans!

[@YTDTETV]

Thanks bill always appreciate your input 👍👍

[@francishagen8508]

Takk!

[@YTDTETV]

Thank you mate always appreciate your support 🙏

[@Cammy3165]

T5 looking good Nathan, great update again 👍

[@YTDTETV]

Thank you mate appreciate that 👍

[@That_black_mk6]

great video as always oh and happy belated birthday as well.

[@YTDTETV]

Thank you mate appreciate that 👍

[@scottap30bot]

The adjuster go up over the chassis pegs, and the little rubber washer goes over it first, and your normal spring seat rubber sits on the swing arm as normal mate. 👍

[@YTDTETV]

Thanks bud 👍👍

[@timeintheuk]

fitted stance + on my t6 van last weekend . im very impressed with it . one difference my stance kit has a helper spring on the front strut under the strut spring to stop it falling around when jacked up. i used modded top mount plates and have it sitting around plus 50mm all round it rides nicely no rubbing. i also moved the abs wire down . it had been rubbing in std postion std hight . rear adjuster goes on top ! i bloody hope so thats where mine is !! There were no instructions with my kit and only one adjuster spanner 🔧

[@YTDTETV]

Hey bud I might look at the helper springs to fill the gap when jacked up, a lot of people have said the adjuster goes at the top so yours are right 👍

[@timeintheuk]

Thanks keep up the great content I esp like the t5 stuff. As I'm a t6 owner Love the exhaust mod .

[@sampayton-fe9ot]

Hey buddy loving the T5 and the caddy videos. You have helped me with my caddy sorting bit out. But was wondering how do I get two of your stickers mate for my caddy. Happy to pay cover cost.

[@cookies_t5_camperlife]

Hi reg on the back the adjustment gose on the top off the spring and the gasket gose at the top

[@YTDTETV]

Thanks bud 👍 maybe I should have read the instructions 🙈

[@cookies_t5_camperlife]

@YTDTETV it's all about learning every day mate

[@YTDTETV]

@@cookies_t5_camperlife absolutely spot on 👍👍

[@cookies_t5_camperlife]

@YTDTETV trying to send a picture 📸

[@e575fho]

Mine has the raked look. Only reason is when the rear was slammed like the front I was going through tyres every 3 months because of the camber!

[@DaveHensey]

Hve been away for few days Belated happy birthday buddy serious chain saw skills 😂😂

[@YTDTETV]

Hey Dave thank you mate mate and haha I’ve not cut a single Branch with the saw, onky box’s 😆

[@francishagen8508]

Nice to see you tooled up 😂, happy days 😊

[@YTDTETV]

Ah ye thanks francis 👍

[@mr.nice.b]

DTE lovely job again but i find if u put lowering springs on a car u have much better handling but u realy feel the bumps wat was it like on the big van wen i done it back in the day i had a escort turbo so his it different in a van 👍👍👍👍👍

[@christinamacintyre9972]

Happy birthday Nathan

[@YTDTETV]

Thanks Christina 🙏

[@johnpaynecarpangler]

Hi Nathan. Love your videos bud been watching some time now. I’ve a question on the suspension you fitted as it looks the business. I’m a carp angler and use the van a lot abroad loaded with a lot of kit have you put load on the suspension yet to see how it handles weight. Cheers bud. John.

[@alankenny7951]

Happy belated birthday Nathan love the channel 👌any chance I can buy some of the dte stickers for my caddy in 🇮🇪

[@YTDTETV]

Hey Alan thank you mate appreciate that 👍 stickers will be available this coming week 🙏

[@chrischeesman63]

Looks brill Nathan👍👍👏👏👏

[@YTDTETV]

Thanks Chris 👍👍

[@marcb5328]

Looking good Nathan

[@YTDTETV]

Thanks Marc 👍👍

[@michaelclarke3684]

Happy birthday 🥳 Nathan

[@YTDTETV]

Thanks Michael 👍👍

[@christinamacintyre9972]

Well done Philip

[@reddave8628]

The adjuster on the back goes on the top of the spring not underneath but I did the same as you and chucked everything barring the spring and hub modded the front.

[@YTDTETV]

Thanks bud a few people have said the adjuster should go at the top, reason I put it that way first is if the adjuster is at the top it would be hard to adjust it as other things in the way but didn’t use them in the end for extra lows 👍👍

[@reddave8628]

@YTDTETV it is fookin daft putting them on the top. Anyway vans looking loads better with the new lows 😎. Lovin the transporter content 👍👍

[@Dalesturgess]

Rear adjuster go at the top of the spring and also dude use the original nut from the old suspension on the front as it’s the correct depth to stop any knocking

[@YTDTETV]

Straight after the shot I noticed I picked the wrong nut up and swapped it over 👍

[@Dalesturgess]

@@YTDTETV oh nice one mate , great vids keep it up I love them 👍

[@YTDTETV]

@@Dalesturgess thanks mate appreciate that 👍👍

[@mattb4266]

Your channel is brilliant, just found it, new sub, All the best

[@christinamacintyre9972]

Looking forward to the drive test on this

[@archiebaldock5488]

Looking good !! nice touch for you 👏👌👍

[@YTDTETV]

Thanks Archie 👍

[@dougbaines9811]

Hey Nath looking great 👌👌

[@YTDTETV]

Thanks Doug 👍

[@Stillbusy105]

17:53 would be cool to see the solar powered battery set up 👍

[@SeanWest-xb5cc]

You must always use the original top nut for the front shocks before you put them back up. And on the rear, the adjusters go to top, not bottom.

[@YTDTETV]

Hey Sean I did use the top not in the end I noticed straight after the shot 👍 I then left the adjusters out as it sat abit high. Thanks bud

[@tommallory4841]

If the rear goes full droop do the springs risk falling out or are the shocks height adjustable aswell?

[@ColinGarner-h1t]

“A bit more lower “ !!!!! The previous owner of my T4 lowered the suspension and luckily for me he realised the error and thankfully put standard suspension back on the van . --

[@Laura92A]

T5 looks the bomb 🤩

[@YTDTETV]

Thank you 👍

[@ColinHamilton-ed8du]

Awesome Thank you keep up the good work on your channel 👍

[@ragnarironspear1791]

Brilliant as always 👍🏻🇬🇧

[@YTDTETV]

Thank you Ragnar mate 🙏👍

[@NathanOsborne-i8z]

What size alloys and tyers are you running on this kit mate do you rate this set up

[@jeffpayne5922]

Happy birthday 🎉

[@YTDTETV]

Thanks Jeff 👍

[@missg300]

T5 is looking sweet 👍

[@ryanoneill1893]

I've just bought t5 with coikovers.... Are you still happy with the ride, i. E not too harsh a ride

[@Ryanlewi17]

The rears, the black rubber goes underneath and you have out the topmount/lowering cup on upside down it goes at the top and you keep your rubber at the bottom otherwise every time you go over a bump its going to make a horrible noise

[@YTDTETV]

Thank you mate 👍

[@andrewwebb1158]

Looks bloody great mate sits nice

[@YTDTETV]

Thanks Andrew 👍👍

[@dandanyeah5342]

Another brilliant video man, I’m after a caddy atm 5 seats, nice wheels lowered ect. If you know of anyone man

[@davidthompson2982]

Great looking van, I really nice sort the height of mine.🎉

[@YTDTETV]

Thanks David 👍

[@kosmacalypse]

Im no specialist but on the rear axle, i imagine that thin rubber goes under the orange spring mount. I guess it wont last long if you put it between the spring and the lower mount. I guess ..

[@YTDTETV]

Hey bud you are spot on a few people have said 👍👍

[@edtilsley]

Hi - what do you recommend for T6 2016 T30 Caravelle. I dont want much lowering really, just better ride

[@andykonkol]

Hi I need some springs for my T5 T30 but have no clue what to go for.......do you recommend any?

[@ColinHamilton-ed8du]

Great channel, enjoy the content as a wannabe T5 owner, just wondering how your new suspension copes with extra weight? Obviously not fully loaded with building materials! just with maybe family and shopping perhaps? I had i golf years ago on coilovers which was great but had to raise it slightly for normal day to day life 😢 Regards Col

[@YTDTETV]

Hey Colin thank you for the kind words 👍 so I have had the mrs, 2 kids and a couple of little motorbikes in the back and it seems good on the lower setting, maybe if you had to move something a little heavier it might want to go up abit but it’s been perfect so far. Hopefully that helps 👍

[@lunganimazibuko2661]

Ah yeah loving the lowered suspension look m8 please consider adding mud flaps 🇿🇦

[@YTDTETV]

Hey bud thank you and yes I do like the mud flap look 👍👍

[@royhoward8065]

Happy birthday 🎉🎉🎉

[@YTDTETV]

Thanks Roy 👍

[@benbroadley4200]

Ar yeah 😁 just out of curiosity mate what tyre size are you running? I only ask because I have the same wheels and I'm also about to fit coilovers but I don't think I'd get away with the lowest setting, cheers and I find your videos, videos? Uploads vlogs whatever the professionals call them helpful,thank you

[@YTDTETV]

Hey Ben really appreciate that bud 👍 I’m running 245 45 19’s with 15mm spacers and no running at all 👍

[@benbroadley4200]

@@YTDTETV good stuff 😁 cheers fella 👍🏻

[@stephenpaull4858]

What size wheels and tyres do you have on

[@niceblokeray]

Just fitted Stanced kit and using standard top and new bottom rubber seats with raised adjuster by 20mm but bump stop not reduced and banging on bounce road test.......Did u cut your bumpstop and if so how much cut off? TIA.

[@YTDTETV]

Hi bud I never cut the bump stops down I’ve not played with the stance setup sorry 👍

[@kevinrobinson5640]

You use wrong nut on top mount, the new nut is just a transport nut you have use original vw nut. It’s all over the forums

[@YTDTETV]

I noticed that after the shot mate and swapped it 👍

[@Cragy1970]

Looks good Nathan 🤙🤙🤙🤙🤙🤙

[@YTDTETV]

Thanks Cragy 👍👍

[@paulcottier93]

Looking sweet 👍🏻

[@YTDTETV]

Thanks Paul 👍

[@strog-70]

Hi pal, could you tell me what you’ve had done to your A pillars?

[@YTDTETV]

DTE TV dashboard paint, there’s a full video on it 👍

[@jamiesharratt3286]

Ah ye ! Great vid dude. Whens the next caddy video ?

[@YTDTETV]

Hey Jamie thank you, there will be a video on my caddy coming next 👍

[@spiderdad00]

looks great

[@richardjones3112]

Looks just right👍.

[@YTDTETV]

Thanks Richard 👍

[@ak-mo9vo]

Sitting right 🤙

[@YTDTETV]

Thanks Ak 👍👍

[@Fiesta_mk6_zetec]

Nice T5

[@nigelrabbitts3438]

Happy 40th birthday

[@YTDTETV]

Thank you Nigel appreciate that mate 🙏👍

[@MalteseMafia]

Looks good 👍.

[@YTDTETV]

Thank you Phillip mate 🙏🙏🙏👍👍👍👍

[@andzonit4380]

Ah yeah 👍

[@ianwilcoxson1579]

Another good vid, van looks superb, can’t help 🤔 thinking those skinner little rubber pad on the lower rear won’t last two minutes and then it’s metal-on-metal 👎

[@YTDTETV]

Hey Ian thank you and I thought that about the skinny rubbers 👍

[@Fiesta_mk6_zetec]

Hey how are you

[@thatginettaguy1714]

I had no idea you could get a coilover kit so damn cheap £250!

[@YTDTETV]

They have definitely come down in price over the years 👍👍

[@brianstorm4806]

Did you toss the instructions away and then ask viewers to tell ya if you guessed right??? LOL 😂

[@YTDTETV]

Haha hey B-RY I thought that as I was editing the video 😆

[@stuartpenn933]

Vans Looking Bang Tidy Nath

[@peerless67]

Ah yeah

[@YTDTETV]

Thanks peerless 🙏👍

[@scotplayer2982]

You need to use the oem top nut on front not the nut that come with the kit

[@YTDTETV]

I did use the original top but in the end I noticed straight after the shot, thanks bud 👍

[@scotplayer2982]

@@YTDTETV if you did that you need to cut the rear bump stop tube down by @30mm it will sit on bump stops I fit coilover on transporters all the time playersvanworks.com

[@nigelastles]

mechy who doesnt know where the adjuster goes !

[@scotplayer2982]

The rear is all upside down

[@YTDTETV]

Hey bud I left the adjusters out in the end 👍

[@treecutter1806]

Dude you and that chainsaw scare me lol

[@YTDTETV]

Haha I’m guessing by your name you know your way round a chain saw 👍

[@DavidNoel-nk8nf]

Rear adjusters go at the top

[@Raymond-Gibb]

why is that?

[@darexg]

So it's more difficult to adjust.

[@YTDTETV]

Thanks David 👍

[@YTDTETV]

That is why I put it at the bottom as there’s no room with it at the top 👍 didn’t use them in the end

[@ColinGarner-h1t]

Should have said “a bit lower “ 😂

[@YTDTETV]

Haha 😆👍

[@monkeymagic4555]

oh how AVE........

[@benmayne7910]

Ohh yea Friday Must mean DTE

[@YTDTETV]

Thanks Ben 🙏👍

[@peterharold6456]

RTB = read the book it’s an instruction manual dood

[@deanlindet3997]

Mate if ya birds built like Eddie Hall, then don't do this 🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣

[@YTDTETV]

Haha luckily she’s abit smaller than the beast 😆👍👍

[@JosipM333]

Good and clever man, best wishes from Croatia💪💪💪🙏🇭🇷