Same issue with mine, looked at this video as I couldn’t see what the issue was after looking at this found the fault weighing a couple of seconds and I can’t thank you enough bud 👍👍
@aaanton112 жыл бұрын
Thanks for the great comments👍🏻👍🏻🛠
@Real_Venture_Out19 күн бұрын
Looking at doing this myself, should I disconnect the battery? Or does that play havoc with the electrical system? Cheers, great video 👍
@roberttyas3812 Жыл бұрын
Thanks to your video I have found the same fault on my 2018 T6 - how many more owners have been driving around for weeks in a German gas chamber - should have been recalled 😂
@aaanton11 Жыл бұрын
Yes it should have been recalled, Thanks for the great comments👍🏻👍🏻🛠
@davidmulhall4632 Жыл бұрын
Thanks very much for the video and excellent tips for replacing this pipe. Most DIY'rs dont have a cordless ratchet so just use a short ratchet with extended length 12 sided torx bits (triple square). Easy to drop bolts so your best friend is an extendable magnet or put something under the pipe to catch anything you drop. Bolts should be torqued up to 20kn but very difficult to get a torque wrench in there. The gaskets are worth replacing while you have it out and are not too expensive. Thanks again, your video saved me a packet and time.
@aaanton11 Жыл бұрын
Thanks for the great information👍🏻👍🏻🛠
@MrSuperdoop3 жыл бұрын
Replied yesterday with my first comment fitted new part today there was a big split underneath but what a job 4 hours you can’t see nothing big hands don’t help what a difference hopefully my fuel economy will increase thanks again
@aaanton113 жыл бұрын
it can be a tricky one, well done Thanks for the great comments👍🏻👍🏻🛠
@Incognito_99 Жыл бұрын
Thank you so much!! This great video is a perfect guidance to do the job 👍👍 After watching I thought it must be also possible for me. And luckily there was absolutely no rust at the screws (although 80.000km). Mounting the pipe was even harder than dismounting it....
@aaanton11 Жыл бұрын
well done, Thanks for the great comments👍🏻👍🏻🛠
@peterrainforth82632 жыл бұрын
had the same problem, and video very helpful. Advise putting doubled aluminium foil below working area as very little space and needed mirrors to see the area. You're bound to drop at least one screw and the foil will catch it rather than be lost forever! should be a recall on this item as seems to be a common fault!
@aaanton112 жыл бұрын
Thanks for the great information👍🏻👍🏻🛠
@luisletra24863 жыл бұрын
Hey :) i start to smell the fumes in cabin, did a quick search in youtube and.... pummmm i found you. The problem in my van is exactly the same pip. Big thanks from Portugal. Thanks for the video, save me time and money :)
@aaanton113 жыл бұрын
Welcome aboard! Thanks for the great comments👍🏻👍🏻🛠
@luisletra24863 жыл бұрын
@@aaanton11 Hello, I fixed the pipe today, soldered it with silver and it worked well. Save some money :P Thanks
@Mac_F87 Жыл бұрын
Got to love VW for using a mix of Allen, Torx and triple square fixings. When doing my camshaft, lifters and timing belt etc I had half my tools of all different sizes laid around.
@aaanton11 Жыл бұрын
😂 Thanks for the great comments👍🏻👍🏻🛠
@freshwaterplumbers3 жыл бұрын
~Thanks, Ive been fumigating myself for 6 months, had enough since the cold weather come !!!
@aaanton113 жыл бұрын
Give it a bash, Thanks for the great comments👍🏻👍🏻🛠
@amm96134 жыл бұрын
Thanks, saved me a lot of time locating the same thing on my T6
@aaanton114 жыл бұрын
Glad it helped, Thanks for the great comments👍🏻👍🏻🛠
@9ngtap83 жыл бұрын
You save my day. I got fume problem a few months, Many mechanics had have different guess.
@aaanton113 жыл бұрын
Thanks for the great comments👍🏻👍🏻🛠
@carl582417 күн бұрын
Thanks for the video .. I have the same issue but also I'm getting a misfire when accelerating. Could this still be the issue ?? Thankyou
@aaanton1116 күн бұрын
Sounds more like an injector issue, Thanks for the great comments👍🏻👍🏻🛠
@adrianjenner12452 жыл бұрын
Same thing has just happened to mine, i will attempt to tackle it myself now after watching this brilliant video, thanks for sharing, new part and gaskets and bolts £55 direct from VW :)
@aaanton112 жыл бұрын
Glad it helped Thanks for the great comments👍🏻👍🏻🛠
@surfbumgeegee2 жыл бұрын
Check with VW befor doing it your self. I phoned to order one and they are replacing them for free as good will. Worth an ask I did and it's worked out for me.
@aaanton112 жыл бұрын
brill Thanks for the great information👍🏻👍🏻🛠
@davenorris84282 жыл бұрын
great Vid just started getting the whiff will look at this but might get my mate to fix it as he's a mechanic and I'm too old to try these days Cheers
@aaanton112 жыл бұрын
Glad I could help Thanks for the great comments👍🏻👍🏻🛠
@MrSuperdoop3 жыл бұрын
My t6 just started today thanks very much😀
@aaanton113 жыл бұрын
Good luck! Thanks for the great comments👍🏻👍🏻🛠
@j2pwak3 ай бұрын
I don't smell exhaust gas in the passenger cabin, but a P0401 "EGR A Flow Insufficient Detected" error appeared on my T6. Do you think this error could also be due to the intake pipe, or will it be something else? I looked at it, but I don't see any clear signs of a hole in the pipe
@aaanton113 ай бұрын
Yes possibly, Thanks for the great comments👍🏻👍🏻🛠
@Wilcko7910 күн бұрын
Do you need any gasket seal or literally just on
@aaanton119 күн бұрын
It sits on a metal compression gasket, Thanks for the great comments👍🏻👍🏻🛠
@irishdesi65673 жыл бұрын
Thanks big help have exactly same issue parts cost from main dealer with gasket €150
@aaanton113 жыл бұрын
Glad it helped, Thanks for the great comments👍🏻👍🏻🛠
@SteelPods4 жыл бұрын
Our Kombi has just developed the same fault. Wouldn't have found it with your video! cheers.
@aaanton114 жыл бұрын
Glad it helped! Thanks for the great comments👍🏻👍🏻🛠
@garykerr67 Жыл бұрын
Brilliant video, very helpful as I had the same problem.
@aaanton11 Жыл бұрын
Glad it helped Thanks for the great comments👍🏻👍🏻🛠
@bussbunnybeamer1302 Жыл бұрын
Thanks for the great video did you replace the gaskets as well if so do you have a part number regards Stu.
@aaanton11 Жыл бұрын
I think i used the same ones again, Thanks for the great comments👍🏻👍🏻🛠
@jaycrossland303 жыл бұрын
very helpful video, just ordering some spline bits but what size is it that i need? thanks
@aaanton113 жыл бұрын
Link to the Splined Socket Set £19.99 amzn.to/3bcTPTn this set is great quality, Thanks for the great comments👍🏻👍🏻🛠
@bg563195 Жыл бұрын
Did you also get an additional noise from the engine bay with that cracked pipe?
@aaanton11 Жыл бұрын
Not really, just a whisper, Thanks for the great comments👍🏻👍🏻🛠
@rdvanturk77553 ай бұрын
I can't smell anything in the passenger compartment, but the vehicle makes a whispering noise on hills and sudden acceleration. Could this be the same problem?
@aaanton113 ай бұрын
sounds like a split turbo hose, Thanks for the great comments👍🏻👍🏻🛠
@harrisondavid8607 Жыл бұрын
Done loads of these pipes. VW should recall the lot to check and replace. It's a serious safety issue.
@aaanton11 Жыл бұрын
I agree, Thanks for the great comments👍🏻👍🏻🛠
@christophsoltau46622 жыл бұрын
Great work contorting down into there. A question: Would it be worth grinding the replacement bolts shorter so they fit flush-er with only a millimetre or two protrusion out the back? (On other similar jobs)
@aaanton112 жыл бұрын
Yes unless you can pop a nut on the remaining thread, Thanks for the great comments👍🏻👍🏻🛠
@scopex27492 жыл бұрын
I had exactly the same but no faults showing up just getting gassed to death in the cab! I ended up fitting a delete kit and save a few quid!
@aaanton112 жыл бұрын
Thanks for the great information👍🏻👍🏻🛠
@danpearson1887 Жыл бұрын
Any information on the delete kit please.
@maxpatten3 жыл бұрын
Great vid. Super helpful.
@aaanton113 жыл бұрын
Thanks for the great comments👍🏻👍🏻🛠
@luke4110 Жыл бұрын
Did you use the old gasket?
@aaanton11 Жыл бұрын
No replaced it with a new one, Thanks for the great comments👍🏻👍🏻🛠
@shanewaller28642 жыл бұрын
Has this pipe been revised for the t6.1 204 dsg
@aaanton112 жыл бұрын
Not Sure? Thanks for the great comments👍🏻👍🏻🛠
@dazed0911 Жыл бұрын
Absolutely legend thank you very much
@aaanton11 Жыл бұрын
Thanks for the great comments👍🏻👍🏻🛠
@stocks3013 жыл бұрын
Great video. How long did it take you to do the job?
@aaanton113 жыл бұрын
about 5 hours with all the messing about, Thanks for the great comments👍🏻👍🏻🛠
@gencayakbas53924 жыл бұрын
Very helpful thank you
@aaanton114 жыл бұрын
You're welcome! Thanks for the great comments👍🏻👍🏻🛠
@ronaldmaxwell45794 жыл бұрын
What is the link for the autoglym chamois
@aaanton114 жыл бұрын
This one amzn.to/3f4g1A7 Thanks Ronald for the great comments👍🏻👍🏻🛠
@robbob65293 жыл бұрын
Very good video
@aaanton113 жыл бұрын
Thanks for the great comments👍🏻👍🏻🛠
@Rottweiler198010 ай бұрын
C’est un turbo ou biturbo ?
@aaanton1110 ай бұрын
No single, Thanks for the great comments👍🏻👍🏻🛠
@andycleary62094 жыл бұрын
Think i would have a word with vw customer services. the fact they have re designed the part shows they know it is a problem they should at least have supplied a new part at cost not hit you for 90 quid, have a go at them you may get some cash back.
@aaanton114 жыл бұрын
The last time the van went to vw for a warranty job they had it 12 weeks, I avoid like the plague 😂 Thanks for the great comments👍🏻👍🏻🛠
@yousavetheylifehelpafrican43413 жыл бұрын
Please tell me number of this parts
@aaanton113 жыл бұрын
its all in the video description Thanks for the great comments👍🏻👍🏻🛠
@jimspares53113 жыл бұрын
Should this not be a recall item, as potentially dangerous poisoning people fault a known fault?,The original part not fit for purpose.
@aaanton113 жыл бұрын
it will be a warranty part, but the main dealers wait time is 6 weeks, quicker to replace myself, Thanks for the great comments👍🏻👍🏻🛠
@chrisb38302 жыл бұрын
I think my T6 has different engine to this one
@aaanton112 жыл бұрын
some do, depends on the power. Thanks for the great comments👍🏻👍🏻🛠
@Doesnotcare124 жыл бұрын
I would put an M8 or M10 or whatever nut on the back of that for piece of mind casting is casting and it won't be as good once you've tapped it out plus it will cover the threads and if you put some copper slip on just in case you have to do this shitty job again!
@aaanton114 жыл бұрын
Sounds good in theory, maybe if I had done it at the time but It would be really hard to get the rear nut on, hopefully it wont break again as long as I have the van😂 Thanks for the great comments👍🏻👍🏻🛠
@bambam712793 жыл бұрын
Tried to buy the part but tps won't sell to normal public has to be a garage!!! How stupid is that!!!
@aaanton113 жыл бұрын
Thats lockdown for you, they normally sell to the public, dealers it is then, Thanks for the great comments👍🏻👍🏻🛠
@pawegruba77873 жыл бұрын
Habe ich gleich schade !! 52 tausend km !!!! Scheise winig Platz für Hand!!!
@aaanton113 жыл бұрын
Yes I was disappointed it should have lasted much longer, and it was awkward to get at Thanks for the great comments👍🏻👍🏻🛠