Vy commodore engine tear down

  Рет қаралды 9,146

Monster A Garage

Monster A Garage

Күн бұрын

Пікірлер: 9
@arisl2370
@arisl2370 2 жыл бұрын
Hey mate, what would be the general cost of doing a job like this by a mechanic ? I can see coolant slowly trickling up the front of my ecotec engine near where the water pump is... I just changed that water pump about 3 years ago.. Could it be a main seal ? The engine is idling fine and running ok at the moment
@monsteragarage843
@monsteragarage843 2 жыл бұрын
I'm guessing a mechanic would charge between $1000 to $2000 and as for the trickling of coolant near the water pump it could just need a new gasket but to be on the safe side I would replace the whole water pump with the new gasket
@kenkowalski1314
@kenkowalski1314 2 жыл бұрын
was it probably just a collapses lifters making it run like shit?? Did u replace them?
@jameslames6469
@jameslames6469 2 жыл бұрын
Is that a 3800?!!?!?!
@HoldenEcotecRepairsBundaberg
@HoldenEcotecRepairsBundaberg 3 ай бұрын
Absolutely
@michelletukia7246
@michelletukia7246 3 жыл бұрын
any idea why my vy radiator fan does not come on have change sensor still not turning on
@monsteragarage843
@monsteragarage843 3 жыл бұрын
Have you tried the relays as they may be a problem
@MeaHeaR
@MeaHeaR 2 жыл бұрын
Connekt 12V straight to itt untt Chequé Fusës
@jcdragon77
@jcdragon77 Жыл бұрын
Very dirty Plenum
Changing The Head Gaskets On My VX Holden Commodore (Part 1)
15:09
Friends make memories together part 2  | Trà Đặng #short #bestfriend #bff #tiktok
00:18
Não sabe esconder Comida
00:20
DUDU e CAROL
Рет қаралды 55 МЛН
ROSÉ & Bruno Mars - APT. (Official Music Video)
02:54
ROSÉ
Рет қаралды 195 МЛН
VY Skid Car Build EP 7: A Touch More Power (but not really) + A Cat
12:42
VY Commodore 3800 water leak repair.
19:13
ZIGgassedUP
Рет қаралды 29 М.
Will a barrel of engine flush clean a sludgy engine?
12:54
Garage 54
Рет қаралды 1,2 МЛН
Semi Forged Ecotec build..
48:09
Corn Fed Boost
Рет қаралды 10 М.
1950s Standard 10 won't run - head gasket failure or something worse?!
18:41
VY V6 INLET MANIFOLD INSTALL
34:42
VY VZ GARAGE
Рет қаралды 7 М.
When one BOOSTED Holden isn't enough
24:01
Fullboost
Рет қаралды 127 М.
Changing The Head Gasket On My VX Commodore  (Part 2)
8:34
bullbags1
Рет қаралды 48 М.
Holden VT 3.8 V6 has an overheating issue..
9:46
ZIGgassedUP
Рет қаралды 27 М.
Friends make memories together part 2  | Trà Đặng #short #bestfriend #bff #tiktok
00:18