wait, is YOURs like this too?

[@jonpaff5699]

Definitely interested in an update video

[@daddydiesel5889]

Lock the rear diff, I did, lock it some more….(pulls off dash)

[@PowerStrokeTechTalkwARod]

Hahahaha

[@15mireles]

Lmfaoo im dying 🤣✌️✌️

[@anne_n_nimity]

Ford used a McDonalds happy meal toy as a quality reference for their interiors. 😂

[@br4041]

Every time

[@19krpm71]

It's not any better for other domestic OEMs. Steering wheel coming off on a model Y and yokes disintegrating. Euro cars are solid until you go to take them apart and clips/plastic exit the chat. It is what it is, no brand is immune, if you work on cars long enough you'll figure this out too.

[@anne_n_nimity]

@@19krpm71 Just about every other brand is better than Ford. Except maybe for GM.

[@19krpm71]

@@anne_n_nimity Give me a break! They all share the same suppliers at this point.

[@joesmoth2610]

This is bidens big green deal

[@dkeator]

Wow! Had my 2021 for about 25,000 miles now, northeast plow truck so I often use the diff lock / 4x4, never once had this issue mine feels super solid! Sitting in the truck now and gave it a few yanks for the hell of it and I can't pull mine off!

[@19krpm71]

There were a lot of trucks sitting in lots waiting on parts during the government mandated shortages. My guess is this truck was one of them and when they went to put it together the second time, clips broke or fell off.

[@M.sami12]

You wanna pull it off ??🤣

[@himni1]

Simmer down on pulling the rear locker. It’s electric not cable driven you can pull it gently. 😂

[@aToast3r]

Thanks chief, what would we do without ya?

[@The_ZachChristensen]

@@aToast3r probably pull the day off😂😂😂😂😂

[@clifford2427]

I'm a diehard ford guy, got a '22 350, not happy with a lot of stuff on it. Quality control apparently took the year off. Considering trading in on gmc...

[@thetinpin]

Careful... GM full size trucks are at the very bottom reliability-wise in Consumer Reports. That said, full size trucks have the worst reliability overall as a class too.

[@AJ12-76]

You think Ghetto Motors is any better?? 😂😂

[@xgomz]

Checked my '22, gave it a good firm tug at the edge of the bezel and it's locked in there good.

[@brihosk]

Seems since the pandemic there are many quality control issues in manufacturing

[@madjackgamingandfitness498]

That’s a ford issue in general. They care about getting the vehicle off the assembly line and shipped and consider any quality issues to be the consumer and dealerships problem later on.

[@moconnell663]

I'm used to driving "fully depreciated" rigs, so my first thought was to run a zip screw in there. It's a good thing I'll never have anything new.

[@hypocriticalharambe8274]

the way god intended or just completely pull off the trim / dash piece if it has no function and throw it in the bed for later disposal many a fuse cover has vanished forever same with hub caps.

[@darrendavis7781]

I have a 22 Platinum.. and definitely going to need to get the sync 4 update

[@shawnparis3570]

Good luck my dealership told me there wasn’t an update and there’s nothing they can do

[@PowerStrokeTechTalkwARod]

Welp theyre not telling you correct information. Watch* our deep sleep video & YOU CAN clearly show them WHAT needs to be done.

[@shawnparis3570]

@@PowerStrokeTechTalkwARod I may call around to different dealers in the area because none of these guys in this dealer I’ve talked to seem interested in doing anything more than what they need to do to get by

[@PowerStrokeTechTalkwARod]

Come see me, ill do it while ya wait!!!

[@shawnparis3570]

@@PowerStrokeTechTalkwARod I get a feeling your a good trip from Houston Texas lmao

[@akbkg1980]

2022 Tremor F250 and no detach issues. By I do have that rattle left front shock.

[@williamreilly8520]

Wow I had a Chinese scooter that had similar plastic crap that broke easy like that also.I would drill holes and use bailing wire to reattach stuff that snapped. 😊

[@N0M4D_22]

I noticed he had some crazy range on his fuel reader! I’m trying to increase mine.. and no issues on loose 4wd knob for mine either, solid.

[@PowerStrokeTechTalkwARod]

48 gallon 8ft bed truck

[@fordtechlife]

Those little white clips always break thats a sign some one has been in there 🔧🚗🇺🇸💪👊🙌

[@damiensingh4950]

Question i have a 2021 f150 lariat fx5 Powerboost. Talking to a coworker he recommended putting it into 4h/4l every so often as to keep it from locking up or something along those lines, since its in 2w for most of the time here in ny .Should putting on the rear locker also be done every so often?

[@GuretoSefirosu]

How hard did it get pulled to do THAT?

[@sgtaaronp]

Side note...I just ordered a 2023 f450 KR, shoud I get the HO 6.7? I did not at the moment...

[@fast2ss820]

I wouldn't get a 23 as bad as they look. But I would hold off on a HO until you can see if it will be reliable, being that it is something brand new

[@nickpasler2629]

There’s not that much different and it’s predicted to be even more reliable due to the increased cooling.

[@sgtaaronp]

@@nickpasler2629 what is the cooling about? Lower temp t-stat or lager radiator?

[@nativeoutdoors1780]

Get the ho go big or go home

[@nickpasler2629]

I know the turbos are water cooled on the HO and I believe some additional components as well. There’s a video of an engineer discussing the upgrades, I believe on TFL.

[@alpine_brine661]

KTP...🤣🤣 Worked at LAP for 10yrs. It's the pack college age engineers following a seasoned 50 yr old engineer. Seen it many times.

[@PowerStrokeTechTalkwARod]

No doubt

[@Dwohman]

That's called COVID quality.

[@ligmaballz3584]

Ford “quality”

[@seanottaway1615]

Could that have possibly been removed previously and they forgot a snap that goes on the pins?

[@michaelbosisto6259]

I’ve the same with doors at a store, sometimes I pull it open, when I’m supposed to push forward.

[@wespierce1686]

Wow, I need to check mine and see if it does that but I also need to know how to get the radio bezel off so I can add my screen protector does it just pop off when you pull it like that? Are there screws anywhere holding it on on the 22 f250 platinum tremor models? I have looked and cannot find anything on the 22 models. The other models I seen you pop the B&O screen off the top and there’s like 2 7 mm screws but I don’t feel any of those Arod any help would be greatly appreciated🤘🏻

[@richardheard1215]

I have a 22 Tremor and the 4 wheel drive seals blew. The dealer said he get 2-3 per week. How about you?

[@jasondeaver2117]

Some people just beat the crap out of stuff then complain it was made cheaply when it breaks

[@Scubaken2022]

My 2022 bezel is fully locked in.

[@willcasanova2061]

That's one of the Super Duty's that came down the assembly line on a Friday

[@19krpm71]

And went out to a field to sit for months before coming back in on a different Friday to be retrofit.

[@rek2bxny]

Is that a factory radio

[@staven512]

22, no problems yet. Just exhaust smell in the cab sometimes. There were a bunch of others complaining on the tremor forums about it too.

[@krisjordan8037]

I am having that too. Only when I let it idle to warm up on cold mornings though.

[@WilleJamesHuff]

2021 same thing. When it’s cold and idled up whatever it’s doing it’s pretty noticeable in cab of mine

[@bradleymenezes6196]

"just" 😂

[@ashes2ashes863]

I don't generally stick up forbFord as im more of a GM guy...however it's pretty obvious to me that the owner or some driver of that truck clearly had no idea that they were supposed to only turn that knob. They probably continued to pull on it like a fool until something snapped. It only takes one fool to ruin everything nice.

[@MRMechanicRC]

Ford built tough Tough just happens to = happy meal

[@benrichards3537]

Ktp doesn’t make the dashboards we just install them that’s a supplier quality issue

[@SWS509]

Quality. I have an 18' and never selling!

[@benztech2262]

The clips that hold the bezel are probably the same as my 06 bezel.

[@jlweck231978]

I don't have that issue. I really wish I had a limited slip diff over the electronic locker though.

[@mcarthur692]

Holy crap... I did not know I could lock diffs. Damn

[@anyo_giantpebble8113]

My family has a 17 f250 and a 19 f150 and neither have that problem, maybe something with the new screen

[@thisisyourcaptainspeaking2259]

Not much chance a screw fell out? I guess there aren't many screws anymore...

[@Krankie_V]

Mine isn't like that. Probably because it's a 2005 RWD open diff model. 😂

[@Metal_Stacking]

My bezel is tight 0 movement. Paint, on the other hand, is sad.

[@RaulCojocariu]

its a 2022 and has the climate gauges, ford i wanted one in my f150

[@FollowingtheCliffNotes]

Hey fella how’s it going

[@PowerStrokeTechTalkwARod]

Felllllla

[@zekester1]

Owner too strong?...Missing clip?...Broken part?...Tell us!...We gots to Know!!!🤔....have a great weekend😉👍💪💯

[@jimanderson2518]

Quality is down the toilet with FORD very sad😪😪 Went out this morning found a major diesel leak .....where oh where could it be fix or repair daily.....its no longer a cleesha

[@jayphilbert5845]

My f150 is firm and good

[@snowg4953]

My o9 f150 never has done that since new. I would most definitely take my 09 f150 and 06 explorer over the current models of these two vehicles when it comes to long term ownership costs and over all reliability/dependability.

[@lightningstrikestwice6302]

Gorilla tape or Velcro should take care of that problem. See if you can sneak a little behind there. You try to pull the whole thing loose it might break some more. I've owned about five f-150s including an SVT lightning. The plastic interior pieces are just not that durable. Sad to say!

[@hardestgainer609]

I can't believe that's how they build these ultra expensive trucks. It looks like a base model Ford in there. Cheap plastic everywhere. There's a big difference between lazily engineered luxury features and an actual luxury vehicle.

[@michaelcuff3418]

Naaa! I got a 2003 Ram! No problems!

[@Vortechtral]

Why don't vehicles with touch displays use glass by now? The soft plastics they use is just so terrible, and they scratch so easy.

[@19krpm71]

$60k+ trucks and the plastic trim is missing clips. Probably from reworking them due to the "chip shortage".

[@drewnicest4319]

A lot of bugs in them 22s 🤔

[@ejgrace420]

Mines perfect with 10k on it I just hit yesterday

[@jezzie1965]

Crazy glue works

[@icehog2367]

FORD quality is in the tank, what a shame.

[@ew9518]

We can add two screws to that😂😂😂

[@nysucks4508]

My bezel is tight

[@howardriggins4010]

Screen protector is a must for that pretty screen and them gains the owner of this vehicle from going to the gym well easy on them buttons guy😂

[@bw2920]

Wife had a 22 and no problems with that

[@whyomgwhywtf]

Shocking a truck that was built during the dark times is cheaply assembled.

[@MT-cr1to]

Quality....

[@MrRoush360]

Probably missing a little clip. Hopefully an easy fix

[@DarkComputer9090]

I was about to compliment the interior of the truck…. Not no more.

[@davidbrennan5]

built Ford tough lol.

[@manny_rudyz]

Jesus loves you ❤

[@adamideus9222]

I'm seeing a trend with these new cars no matter what brand they're all junk when it comes to the electronics and plastic parts that are put in it

[@kerrygibbs8198]

Ford is world class for styling and electronics. But quality is subpar. It’s a shame

[@oneeyedjack8525]

Try a piece of duct tape. They got that new ford duct tape

[@flexxible6987]

Ford build tough 🗿.........yah, tough for your money when it went to the repair

[@Propertyinspector]

I've never had mine come loose. I have over 140k on mine and use my locking diff alot

[@Ricossmft28]

Jesus, how hard is he pulling on the knob someone better tell him to chillll

[@PowerStrokeTechTalkwARod]

Pulling the knob isnt how it broke

[@tomthackston1442]

Yep ford quality is job none!

[@MrGlassman11]

Good response Tom!!

[@koldosodupe9363]

Don't worry 😉 It's going to get much worse 🤪🤪😝😝🤣🤣

[@garrettisamess509]

Lol not yet

[@michaelstevens04]

Must be 22 and up my 21 doesn’t have this

[@PowerStrokeTechTalkwARod]

Sync 4 only brah

[@michaelstevens04]

@@PowerStrokeTechTalkwARod There’s a reason I didn’t have an A in English class.

[@PowerStrokeTechTalkwARod]

Hey i failed history now i kinda wish i hadnt

[@bikerboi7441]

The build quality of all cars are bad rn. Some cars I have seen are even mishlsing trim

[@xBruceLee88x]

Lol definitely a QC Fail

[@tylermacconnell217]

Quality is Job 1

[@markbremmer8642]

Not anymore. Evidently it's second now.

[@MrGlassman11]

​@@markbremmer8642 You know it!

[@seantokash1655]

Maybe even 3rd these trucks are crazy priced for what you get

[@jaimeperez2764]

What going on? it's Chinese part that the problem Chinese part

[@danaborgatti8954]

lol, welcome, Ford. _Ford_On_Road_Dead.

[@jamiesmall5203]

Lol built ford rough

[@hxncho_in_a_ss3807]

Definitely loose Clip

[@matthewculver9667]

Whole thing is made out of plastic

[@matthew7972]

Typical ford , terrible quality control for a $70k truck

[@jamesrankin9833]

Plastic!

[@hunterhawk5710]

Ford vehicles suck,. Had 6 recalls and a $3000 repair bill on a Fusion with 23000 miles, will never buy another ford

[@anne_n_nimity]

You are very right. I owned my last Ford years ago. Never again.

[@ethanrhodeback9998]

All newer cars and trucks are junk

[@daviddancer2727]

Cheap quality. 🤦‍♂️

[@brycmtthw]

Ford, *Quality is Job No.1* 😂

[@6.0hhh]

Maybe weak/missing clips or the customer pulled reeeallllyyyy hard on it lol. But yeah that is bad for a new truck... 😐

[@carrollbridges9341]

Another FORD problem because of design and plastic parts. Vehicles are made so cheap and sold like there made out of gold.

[@tylerjewell9244]

Everything is cheaply made and expensive as hell to buy, what a world we live in 🫠