Nice job and a unique looking Fat Bob without taking away the muscle bike style. Glad to see you did the vented trans cover, it was your video that pointed me to Rons Workshop and decided me to go the same way. I ordered a new "plastic!" top cover, cost me £70 ( I`m in the UK) but I get to keep my original in case things go tits up and I need warranty work (just swap them over). It`s drilled and locktited and ready to fit (not fitted yet). I used 8mm ( 5/16th in US money) fittings and hose as it fits nicely inside the cover space and didnt want to restrict the venting. Keep up the good work, greetings from England.
@aztriumphster2 жыл бұрын
Thanks for the kind words. Good luck on finishing up the vented top cover. U r going to notice the difference immediately. Ride safe
@carlosuribe90062 жыл бұрын
That's tremendously beautiful bike, exelente choice my friend..
@mcscotty3252 жыл бұрын
The chrome exhaust and air intake just pops. Looks amazing!
@libras3225 ай бұрын
Amazing bike I love the xr concept hopefully we get to see a one year update on overall ownership of this bike don't know if you will see this but thank you for sharing with us the community definitely a top ten in my book just on the looks alone
@robbyclark6915 Жыл бұрын
That is one of the best looking bikes I’ve ever seen! Definitely my favorite Fat Bob ever. I love it.
@gadgetguy35792 жыл бұрын
That thing is super clean! Great job on the customization. I bet you get a lot of questions about what you’ve done.
@flyingseraph11842 жыл бұрын
Brilliant job. Great homage to the past.
@leward Жыл бұрын
Very tastefully done, looks stunning.
@denisfranchetto42410 ай бұрын
Awesome bike!!! Great job!
@nickmurray7212 жыл бұрын
Looks very cool, nice work! I have a 2020 slim, stage 2 (power cam) and ohlins suspension going on very shorty, a bike I’m going to keep until I stop riding
@elprass2 жыл бұрын
This is the best fat bob i've seen so far..love your build 👍👍
@aztriumphster2 жыл бұрын
Thanks man!
@icecold88x2 жыл бұрын
Definitely something to be proud of...a job well done!
@onlyhereonce72902 жыл бұрын
Very very good job !! Thanks for sharing.
@glennhand25932 жыл бұрын
Great job brother beautiful bike
@elpato1459 Жыл бұрын
Dope bike man !
@growingwiththebeard7532 жыл бұрын
If you do a stage II you will not be disappointed the right tune an cam 🤤,🔥
@URBANAMERICANTAC2 жыл бұрын
I bought that Skate board shifter. I got rid of that immediately lol. It was so horrible to shift with.
@Bruno-my9uf2 жыл бұрын
Love it . !!! Best Fat bob !!
@johnmcneale22712 жыл бұрын
Well done on the work you,ve done , love the XR design and colour . What is the story behind the number 16 ?
@aztriumphster2 жыл бұрын
Thanks! I helped start the custom motorcycle parts company I work for, Dean Speed, and our first sale, also the year we were officially established was 2016.
@johnmcneale22712 жыл бұрын
Thanks for that , it makes sense . All the best for Dean Speed and I enjoy your vlogs !!!
@zekram796810 ай бұрын
@@aztriumphsterI'm a veteran myself currently active duty, and I also own a Fat Bob. I read on Dean Speed that is vetetan owned. Your bike looks so awesome! I also did the custom dynamics break lights and relocation plate. And I'm so happy I did. The bike now looks more clean and slick. Yours looks better though haha Awesome custom paint and decals. I've been taking inspiration from your videos to work on my bike. Thank you!
@shanefourie70032 ай бұрын
Awesome! Do you have a link to purchase the handle bars, and are the cables long enough?
@bhill16262 жыл бұрын
Beautiful bike and great channel! I'm looking at the same exhaust for my '22 Fat Bob. Is yours the Race version (no Cat, removable db killer) or the Street version (with Cat and fixed baffles)?
@aztriumphster2 жыл бұрын
Thanks! I didn't know there were 2 versions but mine has no cat and removable db reducers
@delarosadevin Жыл бұрын
21 HD FAT TRACK. Id keep the pipes chrome. good blance between black and chrome
@jasperduncan66332 жыл бұрын
Great Job
@bradleydixon-ss2tp Жыл бұрын
Did you have any clearance issues with the mid controls and the exhaust system? I'm looking for the exact same setup for mine!
@aztriumphster Жыл бұрын
The mid control kit comes with a spacer for the right side foot control bracket. Its actually for using the mod control kit on the FXDR. The spacers could work of u have some additional components from S&S to correct the brake linkage. Basically o took a piece of 1/4" aluminum flat bar and drilled 2 holes that lined up with the bolts. It did the trick without having to buy extra components from S&S
@daniels95202 жыл бұрын
Do you still have your Foward controls. I would like to buy them from you. My fat bob comes with mids want to go to Foward controls.
@aztriumphster2 жыл бұрын
Sorry Daniel, I don't have them anymore. Take a look on ebay. Im sure there will be some options for you there.
@BFF19982 жыл бұрын
Hi there, truly a great job! I've been looking for a way to bring the hand grips of my FB roughly between 3" and 4" closer. Would you say that the Dean Speed Switchback setup does that? Thanks in advance.
@aztriumphster2 жыл бұрын
Thanks Marco. The grip end to grip end total width on the Switchbacks is going to be about 30".
@BFF19982 жыл бұрын
@@aztriumphster What about the pull back compared to the stock bars? I'm trying to get the bars 3" or 4" closer to me.
@aztriumphster2 жыл бұрын
@@BFF1998 im pretty sure u will get that with these bars but I can take some measurements when I get home and let u know.
@BFF19982 жыл бұрын
@@aztriumphster when/if you have the time...that'd be great.
@aztriumphster2 жыл бұрын
@@BFF1998 the total pullback is about 7 - 8". Its a little tough to get an exact because I'm measuring from where the bars bolt to the triple treet.
@jasonpicciolo8500 Жыл бұрын
Hey bud quick question did you have to change the stock cables when you added the bars?
@aztriumphster Жыл бұрын
Nope. All stock.
@jasonpicciolo8500 Жыл бұрын
Awesome thanks again
@That90sKid2 жыл бұрын
Sick.
@bernardlesperance742 Жыл бұрын
Looks cool. The only thing that doesn't work for me is the headlight. It might work if there's some way to "paint" the actual headlight glass white (and black for the number) in a way that lets the light pass through it . . . a special transparent paint or material that lets the light through. That way the "16" would be obvious and not require figuring it out. If not doable, then I personally would keep it as it was stock. That's just me. And as I already said, otherwise I like what you've done with the bike.
@JesusLopez-ut3st Жыл бұрын
What bars ar those. They look sick
@aztriumphster Жыл бұрын
Dean Speed Switchbacks
@lostinperil Жыл бұрын
Hey I have an FXFB with the Dean Speed rear crash/passenger pegs, would they fit with that S&S 2 into 2 exhaust?
@aztriumphster Жыл бұрын
Nah unfortunately they wont
@lostinperil Жыл бұрын
@@aztriumphster for sure thanks!
@paulbregonzio22302 жыл бұрын
Can't find those bars with an 8" rise on dean speed site? I want them. Don't have to change cables?
@aztriumphster2 жыл бұрын
Paul, just select the shortest option then add an order comment that u want em with 8" rise. U will be able to run all the factory cables and wires. I have an install video on this channel.
@paulbregonzio22302 жыл бұрын
@@aztriumphster done. Hope they come 8"
@Shaken_AND_Stirred2 жыл бұрын
What kind of grips did you say those were? I’m looking for new ones and those look pretty nice. Thanks
@aztriumphster2 жыл бұрын
Biltwell Recoil. They are about $20. The knurling def helps with grip and they increase diameter near the center of the grip which is comfortable not having to close the hand as much around the grip.
@Shaken_AND_Stirred2 жыл бұрын
@@aztriumphster As always, thank you, Sir!
@aztriumphster2 жыл бұрын
@@Shaken_AND_Stirred Anytime
@therealdjmadskillz Жыл бұрын
What company did your tank decals?
@aztriumphster Жыл бұрын
I used 2 companies. PRI and Wite Wolf
@jimmyggh12 жыл бұрын
Make risers and pullbacks for the Chief Darkhorse
@aztriumphster2 жыл бұрын
Already in process brother
@ziegaubrey1643 Жыл бұрын
Damn that mf sharp
@smoothrider96042 жыл бұрын
What size bars maximize the stock wire harness
@aztriumphster2 жыл бұрын
Do you want to run the stock risers, aftermarket risers, or T bars?
@smoothrider96042 жыл бұрын
@@aztriumphster I want to run the switchback or something with a decent pull backI was wondering what size with the stock harness I'm about the same height as you
@aztriumphster2 жыл бұрын
@@smoothrider9604 if you want to run T bars, u can go up to 8" rise. Checkout the Dean Speed Switchbacks or the Double Backs. If u decide to order up a set, just select the shortest height available in the drop down then add an order comment that you want them with 8" of rise.