WALK IN FREEZER TEMPING TOO HIGH

[@chasewilson3540]

You are the type of employer to work for. Taking the time and effort in explaining how everything works and by letting someone else do the work and try to solve the problem while guiding them in the right direction. Most companies out there now don't even attempt to train them employees.

[@HVACRVIDEOS]

Thanks for watching, I will be going live on KZbin this evening 5/13/19 @ 5:PM (west coast time) to discuss my most recent uploads and answer questions from the chat. Come check it out if you can kzbin.info/www/bejne/qoLFaoSBbrGhfpY

[@mattwoodbridge7924]

Hell yeah, I thought I watched all of your videos... but KZbin is finally showing me stuff I haven't yet seen.

[@hvacir9176]

that apprentice is super lucky to be learning from u . i hope he knows that.

[@deanmohamed7575]

I found this hidden gem just now. Can't believe I missed this one in may. Thank you for the detailed grasslin video and the wand link!!

[@SCOTTYD2031]

I like how you label everything AND put a date in the cover of the new defrost clock. Koodos

[@mccutcheonservicesllc81]

You didn't put the jumper in on purpose, you sneaky little devil 😂 Ya gotta teach them right 👍

[@HVACRVIDEOS]

Correction I let him forget to put the jumper in, he wired it himself..... :-)

[@mccutcheonservicesllc81]

@@HVACRVIDEOS Good deal 👍

[@HVACRVIDEOS]

Thanks for watching, I will be going live on KZbin this evening 5/13/19 @ 5:PM (west coast time) to discuss my most recent uploads and answer questions from the chat. Come check it out if you can kzbin.info/www/bejne/qoLFaoSBbrGhfpY

[@edwardgarza5104]

Curious on how to replace a heating element that's bad and it's located in the middle of the coil?

[@seanmichael8202]

Damn, man... Where the hell were YOU when I was a confused and frightened little boy?!?! Haha. Nice to see the mentoring taking place. Its so good to see some real field training. Good stuff, like all the other stuff!

[@HVACRVIDEOS]

Thanks Sean

[@seanmichael8202]

@@HVACRVIDEOS; Nah, thank you! You are going the extra mile in an industry so few can appreciate. I mean, I haven't been in the field in almost three years, but I gotta tell ya! The more I watch your videos, the more I ACTUALLY consider manning up and getting back out there! Ha... It is definitely a beast, but man... When you tame it like it seems you have, its a limitless opportunity. The trade off is time. Damn good money though...

[@rogerf3622]

Another great diagnostic walk through. Thank you. I also like your big picture approach as there may be multiple issues like here the pump down into a vacuum.

[@HVACRVIDEOS]

Thanks for watching, I will be going live on KZbin this evening 5/13/19 @ 5:PM (west coast time) to discuss my most recent uploads and answer questions from the chat. Come check it out if you can kzbin.info/www/bejne/qoLFaoSBbrGhfpY

[@sterlingarcher46]

Man , I wish I had someone to walk me through like Chris did. Instead all I seem to meet is negative techs who just try to show off or prove they know better , even when they're 100% wrong... I always wonder , is it just the case where I'm at or is it the same everywhere 🤔. Thanks for the vid , Chris 👍

[@rugged1987]

I had the same problem when I started but then ran into a few good techs that really explained things to me and from then on i vowed to pass along my knowledge as well.

[@HVACRVIDEOS]

Good man, Thanks for watching, I will be going live on KZbin this evening 5/13/19 @ 5:PM (west coast time) to discuss my most recent uploads and answer questions from the chat. Come check it out if you can kzbin.info/www/bejne/qoLFaoSBbrGhfpY

[@fubar1801]

Duration is the failsafe. Defrost should terminate by the DTFD. This way the coil temperature high enough so that coil fully deices and the fans don’t turn on right after a defrost. Love those clock. Good video.

[@Akvan79]

I like the fact that you let him make the mistakes and learn from his mistakes

[@HVACRVIDEOS]

I try to let him learn in a controlled environment, Thanks for watching, I will be going live on KZbin this evening 5/13/19 @ 5:PM (west coast time) to discuss my most recent uploads and answer questions from the chat. Come check it out if you can kzbin.info/www/bejne/qoLFaoSBbrGhfpY

[@mineown1861]

Seeing the R12 compressor takes me back , I did refrigeration before I hung up my toolbox and switched to computer programming. Restaurants and hotels were always the worst , customers messing with the defrost clocks , greasy coolers and knuckles slashed by the fins when your hand slipped while stripping a wire. Food processing plants were the best , walk in blast freezers being great hangover cures on a Saturday morning.

[@jessepinedo6303]

Just made the same mistake 2 weeks ago not putting the jumper between 1 and 2. But I’m learning so I have a ways to go! Great video Chris!

[@bluedogdataelectrical6303]

Great work another great vid.. well done on coaching others..

[@HVACRVIDEOS]

Thanks for watching, I will be going live on KZbin this evening 5/13/19 @ 5:PM (west coast time) to discuss my most recent uploads and answer questions from the chat. Come check it out if you can kzbin.info/www/bejne/qoLFaoSBbrGhfpY

[@andrewdonagher6497]

Great video nice your taking the time to teach the other tech

[@HVACRVIDEOS]

Thanks for watching, I will be going live on KZbin this evening 5/13/19 @ 5:PM (west coast time) to discuss my most recent uploads and answer questions from the chat. Come check it out if you can kzbin.info/www/bejne/qoLFaoSBbrGhfpY

[@jaredwilson8766]

That F terminal was killing me ! Thanks for sharing the OCD 😂

[@2kauthentic]

Thanks for the knowledge in all your videos. I love it

[@Rangernewb5550]

You're a really cool teacher.

[@deanjt]

Great video as always - makes my train commute home from Sydney all the better this afternoon!

[@HVACRVIDEOS]

Thanks bud

[@walkingfreak]

I have a walk in freezer that i think has a dead fan delay and defrost termination switch along with a dead defrost clock being that the defrost clock isn't keeping the correct time and losing 2hrs. Also once the whole system comes back the fans instantly kick back on. Those grasslin are great for what they do, but they don't last like a paragon. Good video! it's nice to learn from you.

[@bradleymorey]

Thanks for sharing Chris 🤙

[@HVACRVIDEOS]

I will be going live on KZbin this evening 5/20/19 @5:PM (pacific time) to discuss my most recent uploads and answer questions from emails and the chat, come on over and check it out if you can kzbin.info/www/bejne/Y2WxZKibeNt9hbs

[@atch_n_sons]

5am EST in NY, thanks for the early service video.

[@HVACRVIDEOS]

Thanks for watching, I will be going live on KZbin this evening 5/13/19 @ 5:PM (west coast time) to discuss my most recent uploads and answer questions from the chat. Come check it out if you can kzbin.info/www/bejne/qoLFaoSBbrGhfpY

[@anthillmobstars]

I noticed the jumper wasn't in there. I thought to myself, "Why is there no jumper? Am I about to learn something about these Grasslins I didn't know?" Then you ended up adding it. I thought, "Ah, okay so I'm not losing it. That's good."

[@HVACRVIDEOS]

I was testing the apprentice , he was the one wiring it up so I let him forget it so he could figure it out! Thanks for watching, I will be going live on KZbin this evening 5/13/19 @ 5:PM (west coast time) to discuss my most recent uploads and answer questions from the chat. Come check it out if you can kzbin.info/www/bejne/qoLFaoSBbrGhfpY

[@rafaelgomez4304]

Nice and thorough job 👌🏽👍🏽

[@billburnett9951]

Great video! Glad to know I'm not the only one with OCD! I'm exactly the same when I'm on a call with my apprentice.

[@HVACRVIDEOS]

Thanks for watching, I will be going live on KZbin this evening 5/13/19 @ 5:PM (west coast time) to discuss my most recent uploads and answer questions from the chat. Come check it out if you can kzbin.info/www/bejne/qoLFaoSBbrGhfpY

[@jfs520]

Probably already commented on this vid but awesome footage Chris thank you

[@albertodiego3866]

Nice job bro, in my company we use paragons and thebens it’s good to see other brands in action

[@donnierobertson3088]

Great job again like always

[@HVACRVIDEOS]

Thanks for watching, I will be going live on KZbin this evening 5/13/19 @ 5:PM (west coast time) to discuss my most recent uploads and answer questions from the chat. Come check it out if you can kzbin.info/www/bejne/qoLFaoSBbrGhfpY

[@throttlebottle5906]

I like the grasslin timers for gravity coil, no matter the magic done and how people claim to to set them up, they always ice up too fast with seasonal climate/humidity changes. long defrosts during day when in use is a no go and will never keep temp nor icing down. about then the inspector walks in to check product temps and screams... which = customer/employee cranks thermostat lol

[@romulopastora8834]

I like your vídeos .I salute you from Houston texas..thanks for sharing your knowledge

[@HVACRVIDEOS]

Thanks for watching, I will be going live on KZbin this evening 5/13/19 @ 5:PM (west coast time) to discuss my most recent uploads and answer questions from the chat. Come check it out if you can kzbin.info/www/bejne/qoLFaoSBbrGhfpY

[@jmgrefrigeration4000]

Dude you must have not read a comment I left before about the paragon universal voltage model 9145-00. That’s my go too clock. I think it’s better made than grasslin and will fit in paragon housings. I keep a grasslin just in case I run into one that failed so I don’t have to replace housing every time. It’s the little shot that saves time when your smashing out calls and you got to keep moving lol.

[@SombraLocs]

Early bird gets the worm. Great video!

[@HVACRVIDEOS]

Thanks for watching, I will be going live on KZbin this evening 5/13/19 @ 5:PM (west coast time) to discuss my most recent uploads and answer questions from the chat. Come check it out if you can kzbin.info/www/bejne/qoLFaoSBbrGhfpY

[@deloct]

Great work. Thank you.

[@winkhvac62]

Thank you

[@harrydickson4575]

Excellent job 👍👍👍

[@HVACRVIDEOS]

Thanks bud, Thanks for watching, I will be going live on KZbin this evening 5/13/19 @ 5:PM (west coast time) to discuss my most recent uploads and answer questions from the chat. Come check it out if you can kzbin.info/www/bejne/qoLFaoSBbrGhfpY

[@kennyw7453]

"I am a paranoid weirdo", I am guilty of the same OCD.

[@HVACRVIDEOS]

Thanks for watching, I will be going live on KZbin this evening 5/13/19 @ 5:PM (west coast time) to discuss my most recent uploads and answer questions from the chat. Come check it out if you can kzbin.info/www/bejne/qoLFaoSBbrGhfpY

[@gaacars]

Do YoU lIkE tHe WaY i FoRmAtEd ThIs CoMeNt ThEn ( does this trigger your ocd just wondering)

[@inoahmann7542]

@@gaacars yes, it does. Almost as bad as wiring resting on a freezer evap drain pan.

[@Nateone626]

Well done bro 🤘🏾

[@HVACRVIDEOS]

Thanks for watching, I will be going live on KZbin this evening 5/13/19 @ 5:PM (west coast time) to discuss my most recent uploads and answer questions from the chat. Come check it out if you can kzbin.info/www/bejne/qoLFaoSBbrGhfpY

[@throttlebottle5906]

woah at rusty as can be thermostat cover, I'd have been looking inside there for carnage also! although they normally fail with a warm box, you just never know :)

[@justinb8636]

great job !!

[@HVACRVIDEOS]

I will be going live on KZbin this evening 6/3/19 @ 5:PM (west coast time) to discuss my most recent uploads and answer questions from emails and the chat, come over and check it out. kzbin.info/www/bejne/d2a9do1qhZVnbqs

[@Jeepjones85]

Awesome video 👍🏻

[@GerryMetrillo]

Good vid 👍

[@Georges3DPrinters]

13:06 percussive maintenance

[@andrewedis9907]

Wow an old R12 unit, put it in a museum. 😉🤣

[@More350Power]

I still see some R12 & 22 systems, though not many. Lots of local places still have the semi-hermetic copeland systems in them.

[@HVACRVIDEOS]

Yeah I still run into a bunch of old stuff too, Thanks for watching, I will be going live on KZbin this evening 5/13/19 @ 5:PM (west coast time) to discuss my most recent uploads and answer questions from the chat. Come check it out if you can kzbin.info/www/bejne/qoLFaoSBbrGhfpY

[@frankmashione139]

Good video

[@HVACRVIDEOS]

Thanks bud!

[@kooseerden3767]

Al those frosted wires and wet terminals made me wonder: Does this never go wrong, resulting in short-circuits or electric shocks?

[@HVACRVIDEOS]

Surprisingly we don't have many electrical shorts because of the moisture, Thanks for watching, I will be going live on KZbin this evening 5/13/19 @ 5:PM (west coast time) to discuss my most recent uploads and answer questions from the chat. Come check it out if you can kzbin.info/www/bejne/qoLFaoSBbrGhfpY

[@simonrichard9873]

I like how you just whacked the pressure switch with a screwdriver and the compressor shut off

[@HVACRVIDEOS]

Its my secret way to fix things, just whack it........ Thanks for watching, I will be going live on KZbin this evening 5/13/19 @ 5:PM (west coast time) to discuss my most recent uploads and answer questions from the chat. Come check it out if you can kzbin.info/www/bejne/qoLFaoSBbrGhfpY

[@throttlebottle5906]

it's probably due for replacement, but it's common for springs and diaphragms to wear/lose strength or work harden with aging. which of course makes throws off the pressure limits set.

[@kirktrapp7001]

Holy crap I have not seen an operating R12 unit Sense about 1998 and it became illegal to build one in what about 2000

[@tylerbrown5597]

Good vid

[@Losangeles1980]

Good morning from LA 213

[@HVACRVIDEOS]

Thanks for watching, I will be going live on KZbin this evening 5/13/19 @ 5:PM (west coast time) to discuss my most recent uploads and answer questions from the chat. Come check it out if you can kzbin.info/www/bejne/qoLFaoSBbrGhfpY

[@chrishowell7263]

I have made a move towards all digital defrost timers, no mechanical parts to fail. It's either good or bad and you can just hit a button to manually put it into defrost.

[@HVACRVIDEOS]

Yeah it's hard for me to make the jump but the industry is heading that way for sure!

[@glonkfpv]

Early... so first. 2:46 AM, 5/13/2019 Northern Colorado

[@HVACRVIDEOS]

Thanks for watching, I will be going live on KZbin this evening 5/13/19 @ 5:PM (west coast time) to discuss my most recent uploads and answer questions from the chat. Come check it out if you can kzbin.info/www/bejne/qoLFaoSBbrGhfpY

[@mojoemurphy]

About 3 minutes in the frost pattern on the side of the coil makes me suspicious of the drain

[@todddunn5912]

jumper. I just did this yesterday.

[@tecnicohvac219]

Well interesting I like to deal with many electronic things but I do not have much experience.

[@HVACRVIDEOS]

Thanks for watching, I will be going live on KZbin this evening 5/13/19 @ 5:PM (west coast time) to discuss my most recent uploads and answer questions from the chat. Come check it out if you can kzbin.info/www/bejne/qoLFaoSBbrGhfpY

[@jairomolina2141]

I am wondering if the limit switch was shorted . That’s why you were getting power on X.

[@robertarnold6672]

Hey Chris, is that a HVAC Control Systems book by Ronnie J. Auvil that I see in the background? I work on old school HVAC pneumatic controls so that book is like the bible for me. Also it covers a lot of things I deal with on a regular basis like VAV's, reheat coils, AHU's, etc. All good stuff. I took Ronnie's online course for Building Automation Systems.

[@HVACRVIDEOS]

Yes it is, I will be going live on KZbin this evening 5/20/19 @5:PM (pacific time) to discuss my most recent uploads and answer questions from emails and the chat, come on over and check it out if you can kzbin.info/www/bejne/Y2WxZKibeNt9hbs

[@williamherrera1496]

Can you please do a video on the trane EBM blower motors. Thanks

[@orlandorizzo5780]

Your awesome The defrost clock was bad mmm Kay and oh yeah Drugs are bad Mmmm Kay "South Park " Love your videos :)

[@cesarnovoa1197]

I think you should’ve marked the timer first before spinning it to make sure it was properly spinning and then put it into a defrost and let it deice on its own and make sure that it’s not kicking it out of defrost too early

[@cesarnovoa1197]

Good video 👍

[@abynoura7253]

Obsessive compulsive disorder!!! Thats what make ur job perfect and nice!!!

[@engineer1793]

Man i havent seen an r12 compressor in a while

[@mrmeowcat1597]

3:57 those are my favourite.

[@lcampm2]

what keeps the fans from blowing the mist out when it comes back on after defrost reducing ice in walk n?

[@HVACRVIDEOS]

A fan delay limit switch

[@wickylopez8867]

The family delay switch is in series with your evap fan circuit. At times called a klixon.

[@sincityhvacr]

great video where did u get that hose extension that u were using to wash the evap

[@HVACRVIDEOS]

Lowes, there is a link in the video description.

[@HVACRVIDEOS]

Thanks for watching, I will be going live on KZbin this evening 5/13/19 @ 5:PM (west coast time) to discuss my most recent uploads and answer questions from the chat. Come check it out if you can kzbin.info/www/bejne/qoLFaoSBbrGhfpY

[@allassured7413]

Great, videos. How much will you charge me, if I ride with you a week. I need some hands on experience. Thank you very much.

[@dcvoltzz4472]

numbers 223, 224, 225 in this Refrigeration playlist are all dup listings of the same video 👍 😉

[@isaacmartinez3222]

Have you had customers who are totally against a defrost in the middle of the day? Do you appease the customer or keep your position of a defrost in the middle of the day?

[@Ohsnaapp]

Man I’d love to have a 1 on 1 conversation with you about some questions I have. I’m new to the walk-in side of things.

[@HVACRVIDEOS]

I will be going live on KZbin this evening 5/13/19 @ 5:PM west coast time to answer questions from emails and the chat you are welcome to come check it out . I will post a link later this afternoon

[@Ohsnaapp]

HVACR VIDEOS I’ll email you and if you have Spare time could you reply. Work about 100 hours a week and only can watch the videos a few times a week. Thanks for the reply

[@HVACRVIDEOS]

will do just in case you can make it here is the link for the stream tonight , Thanks for watching, I will be going live on KZbin this evening 5/13/19 @ 5:PM (west coast time) to discuss my most recent uploads and answer questions from the chat. Come check it out if you can kzbin.info/www/bejne/qoLFaoSBbrGhfpY

[@shadowbanned69]

Havnt you replaced just about all of those systems in that rack???? I've been watching ya for a while now and I think your damn close Chris .. hahahahaha

[@HVACRVIDEOS]

Were getting there, Thanks for watching, I will be going live on KZbin this evening 5/13/19 @ 5:PM (west coast time) to discuss my most recent uploads and answer questions from the chat. Come check it out if you can kzbin.info/www/bejne/qoLFaoSBbrGhfpY

[@movax20h]

Where do you get r-12 from? Black market? :) I guess there is some minimal supply for some servicing and maybe as fire retardant in some critical systems (aviation), so maybe there is way.

[@jasonmurawski5877]

Hey chris, how much of a hassle for you is it to drain the refrigerant, it seems to me that would be a job that i wouldnt like doing

[@HVACRVIDEOS]

its not a big deal at all, we have a special machine that does it for us, I will be going live on KZbin this evening 1/27/20 @ 5:PM (pacific time) to discuss my most recent uploads and answer questions from KZbin comments, emails and the live chat. Come on over and check it out if you can, kzbin.info/www/bejne/a3zXh5yflLmqa68

[@walkingfreak]

Oh yeah what is a normal temperature swing for a walk in freezer? The one i mentioned swings about 10 degrees and it seems extreme to me. It has an analog T stat.

[@HVACRVIDEOS]

I set mine for 3-4 degrees of temp swing, Thanks for watching, I will be going live on KZbin this evening 5/13/19 @ 5:PM (west coast time) to discuss my most recent uploads and answer questions from the chat. Come check it out if you can kzbin.info/www/bejne/qoLFaoSBbrGhfpY

[@throttlebottle5906]

poor thermostat location with lack of airflow and a box opened often can result in wide swings, as can bad thermostat or leaky door/box causing previous person to set it wide

[@Nietzointeressantdoen]

WoW, is that machine working with R-12?!

[@HVACRVIDEOS]

Yep

[@Nietzointeressantdoen]

This refrigerant has been banned in the Netherlands since 2001. Now its illegal...

[@davetatro478]

What’s the condition of the walk in box? Could be compromised

[@HVACRVIDEOS]

It was in decent shape, Thanks for watching, I will be going live on KZbin this evening 5/13/19 @ 5:PM (west coast time) to discuss my most recent uploads and answer questions from the chat. Come check it out if you can kzbin.info/www/bejne/qoLFaoSBbrGhfpY

[@throttlebottle5906]

jumpers, we don't need no stinking jumpers =p

[@versacecooks9080]

I have a question for you.i need your help before i condem this compressor I have a 115v reach in cooler and the compressor is a neu2155u. Is trying to start and is pulling 26amps but not starting. Is it done or what you thinking i shoul check next. It has a potential relay.

[@HVACRVIDEOS]

Check the starting componets before condemning the compressor

[@versacecooks9080]

@@HVACRVIDEOS ok I replaced the potential relay start cap and run cap are good. It is still tried to start and is pulling 26 amps. It's rated for 6.80 RLA. LRA is 40.0 I think is done.

[@lee-johnson]

Termination temp sensor still good? Could be terminating too early.

[@HVACRVIDEOS]

Yeah it was ok, but I'm still trying to get them to change it all out, the equipment is beat down. Thanks for watching, I will be going live on KZbin this evening 5/13/19 @ 5:PM (west coast time) to discuss my most recent uploads and answer questions from the chat. Come check it out if you can kzbin.info/www/bejne/qoLFaoSBbrGhfpY

[@MultiBrommer]

R12 systems are strictly forbidden by the motrealprotocol since 2000. since 2005 R22 was added. this accounts for R404A and starting from 2030 R410A as well. from that moment on only natural gasses like ammonia and co2 are permitted. since 2015 R22, R401A, R402 and R408 are strictly forbidden to be used at all. all that because R22. from 2030 onwards only R744, R290 and Nh3 will be permitted.

[@parplatmedvanner1669]

You guys still using R12 & R22 in the states?

[@HVACRVIDEOS]

Yeah we still run into some older refrigerants, Thanks for watching, I will be going live on KZbin this evening 5/13/19 @ 5:PM (west coast time) to discuss my most recent uploads and answer questions from the chat. Come check it out if you can kzbin.info/www/bejne/qoLFaoSBbrGhfpY

[@Nutguy95]

What do you guys in the US mean when you say a system is "Temping" ?

[@HVACRVIDEOS]

We are referring to the temperature inside the box so if its temping good the temperature is correct but if it's not temping than its above the desired setpoint.

[@darekcieslik6838]

R-12 in california wow

[@russell4309]

👍

[@HVACRVIDEOS]

Thanks for watching, I will be going live on KZbin this evening 5/13/19 @ 5:PM (west coast time) to discuss my most recent uploads and answer questions from the chat. Come check it out if you can kzbin.info/www/bejne/qoLFaoSBbrGhfpY

[@badshahkhan3522]

i will join you company

[@TheRealDorran]

1:38 Otis bing

[@davejohnsonnola2758]

Can you expand on your aborted "latency" comment with regard to digital gauges during the pump down and pressure switch adjustment. Like the addition of newbie hands and allowing and correcting errors with explanation! Thanks.

[@fluke196c]

Electronic gauges need time to measure the pressure, convert to digital, and update display. It can take longer than you think. In the video the SMAN gauges appear to be behind by 0.5s.Analog gauges are instant by comparison.

[@davejohnsonnola2758]

@@fluke196c So for setting pressure switches, especially in a pump down situation, better to use an old analog stubby gauge?

[@rugged1987]

@@davejohnsonnola2758 I honestly dont think it matters as long as your paying close attention to your digis. You will get it close enough.

[@HVACRVIDEOS]

I will discuss this in the stream tonight, Thanks for watching, I will be going live on KZbin this evening 5/13/19 @ 5:PM (west coast time) to discuss my most recent uploads and answer questions from the chat. Come check it out if you can kzbin.info/www/bejne/qoLFaoSBbrGhfpY

[@steveblake8766]

#3 Thumbs up! :)

[@HVACRVIDEOS]

Thanks for watching, I will be going live on KZbin this evening 5/13/19 @ 5:PM (west coast time) to discuss my most recent uploads and answer questions from the chat. Come check it out if you can kzbin.info/www/bejne/qoLFaoSBbrGhfpY

[@wwolf771177]

Paragon 9145-00

[@HVACRVIDEOS]

Yeah I know of them but I haven't jumped on the bandwagon yet.......... Thanks for watching, I will be going live on KZbin this evening 5/13/19 @ 5:PM (west coast time) to discuss my most recent uploads and answer questions from the chat. Come check it out if you can kzbin.info/www/bejne/qoLFaoSBbrGhfpY

[@edwinrivera5917]

Nobody see when u wire thenew timer

[@aydan_r1332]

JUST WONDERING WHY ARE ALL OF YOUR VIDEOS TITLES IN ALL CAPS

[@sambaya100]

your are very good but the problem was your defrost termination fan delay not the defrost time clock your are selling part that the costumers do not need sorry this comment

[@HVACRVIDEOS]

I will be going live on KZbin this evening 11/11/19 @ 5:PM (pacific time) to discuss my most recent uploads and answer questions from emails, the Livechat, and KZbin comments. Come on over and check it out if you can kzbin.info/www/bejne/iJ6WiXp4ed2jhbM

[@yllai4284]

American don’t believe in using controller?

[@todddunn5912]

klikson

[@HVACRVIDEOS]

yeah it had bad limit switches, I will be going live on KZbin this evening 7/15/19 @ 5:PM (west coast time) to discuss my most recent uploads and answer questions from the chat, emails, and the KZbin comments come check it out if you can. kzbin.info/www/bejne/gKeVi2lnZ76nnLM

[@throttlebottle5906]

look at all those big ugly marker scribbles :)) I'd much rather see that than no labeling at all, whack-a-mole guess work sucks~