Walkera F-210 repair bricked flight controller.

[@marcneufeld898]

Thank you!

[@chrisballer78]

If I connect to cleanflight can I change the rates and save, without messing up anything else?

[@CaseyHerman]

It works as normal with cleanflight. The only thing I didn't get working correctly was the LED indicators

[@chrisballer78]

@@CaseyHerman thanks for the quick response wow. I dont want to flash cleanflight firmware though(well I didnt now I do a little) i just wanted to know if i can change the rate values and save. Also that they would stay. Also are you still using the devo7 radio?

[@rl2769]

I’m have a F210 and my dc is fine. But if I download clean flight and install the drivers will I be able to just connect the usb from the quad to the lap top and connect to clean flight with out flashing it and taking it apart to hold the boot ?

[@rl2769]

Subbed to your channel to by the way . Thanks for sharing this.

[@reggypoggy4045]

nice and informative video, i have a rodeo 150, i bricked my fc, i have done exactly what u did, with the exception of shorting but the instead pressing the boot button, but my fc still failed to flash, if i buy a new fc will it work? thanks

[@anthoniusdhany4632]

hi after this what the next step because cleanflight does not have restore in this version 1.2.4 thx

[@CaseyHerman]

Anthonius dhany you will need to apply your tuning and settings. I can try to add my pids when I get a chance.

[@anthoniusdhany4632]

Casey Herman yes my FC has brick can not flashing do you have private account like facebook maybe?

[@CaseyHerman]

If you follow that video I made you can fix it. set the baud to manual 256000 Set to flash on connect Short the boot pads on the bottom of the board. Connect the USB and it will flash again.

[@anthoniusdhany4632]

i have done to do that all but the configuration ithink is diferent because does not want armed.

[@anthoniusdhany4632]

how to restore config in clean flight ?