Walls Walls Walls - 5x8 Cargo Trailer Camper EP 5

This was a long process, and I learned alot along the way. Hopefully you'll be able to save some time if you are doing a van build or cargo trailer camper build like this. Features installing 1.5 inches of foam insulation, Cutting a window into the cargo trailer camper, Re-routing Trailer wiring, Installing 1/4 inch Cedar Tongue and Groove feature walls.
Some Tools and supplies:
Rivet Nut Tool - amzn.to/41gVam1
Rivet Nuts (i used a bunch!) - amzn.to/3Soo0wq
L-Track - amzn.to/3JCdHCz
L-Track Studs - amzn.to/3khVU9P
RV Windows with Sliding Glass - amzn.to/3xU3uKF
Bedside / Wall Mount Lamp - amzn.to/3ZbaVsC
Dimmer / Switch Pushbutton - amzn.to/3So9l4o
~~ ~~~ ~~ ~~~ ~~ ~~~ ~~ ~~~ ~~ ~~~ ~~ ~~~
Some of the links above are Amazon affiliate links. This means that if you decide to make a purchase through one of these links, I may receive a small commission at no extra cost to you.
I want to assure you that while these links are affiliated with Amazon, nothing in this video is sponsored, and I have not received any products for free. My opinions and recommendations are entirely my own, and I only share products and services that I genuinely believe in. Thanks for watching!

[@josephgeorgeejr7039]

As a seasoned professional utube trailer build watcher, soon to be doer, you did great with this video style and the build itself!

[@adv3ntur3ing]

Thanks!!

[@drnutell]

Long and detailed please. With shortcuts and tips. Great build.

[@adv3ntur3ing]

Thanks!!

[@nevillemcnaughton6306]

You are so awesome, thanks for the great instruction.

[@adv3ntur3ing]

Glad it was helpful!

[@kenmclaughlin2010]

Wow great work and well thought throw you gave me great tips , I am just starting with my 5 x 10 V-Noose cargo trailer ,!!!

[@adv3ntur3ing]

Awesome! Good luck!

[@grantlingley1385]

This was a really informative video and crazy but it appears you live in Nova Scotia as do I! Thanks for all of your work posting! I want to do similar but for Dirt Bike and Camping over night.

[@adv3ntur3ing]

Thanks for watching!

[@LionstrikeUSA]

Well done

[@adv3ntur3ing]

Thanks!!

[@karlo8233]

Any chance you can post a finished look at the build? I appreciate all the attention to detail you did in the series. Thanks!

[@adv3ntur3ing]

A nearly finished view will be coming soon! I did a walk around in and out while I was on a trip. Just need to edit and post. Thanks!

[@Clutchlove2003]

Longer and more detailed is great! Thank you for taking the time to make this video.

[@adv3ntur3ing]

Thanks!!

[@ShadowMoonFarms]

Very good instructional video. Thank you

[@adv3ntur3ing]

Thanks!

[@donnathomas3977]

Thank you for the long, detailed video! I have watched so many videos, and most of them leave me with even more questions and doubts about how I should proceed. I’m looking forward to seeing more of your build! Thank you so much!

[@adv3ntur3ing]

Glad it was helpful!

[@markwentland3147]

I like the more detailed version

[@adv3ntur3ing]

Thanks!!

[@jskibba]

Thanks for all the great info. I enjoyed the longer detailed video. This is probably the best insulation video on KZbin. Well done sir!

[@adv3ntur3ing]

Glad you enjoyed it! Really appreciate the feedback!

[@sean8900]

Enjoying your channel. Building out trailer myself. Want to do exactly what your doing here. However I do not have a table saw to cut down board to 1/2”. Do you know where I could purchase some?

[@adv3ntur3ing]

Thanks!! You could use 1/2 inch plywood and cut 1 1/2 inch strips of it with a circular saw or jigsaw and do the same thing. Would take a little longer, but it all gets covered up by the wall material, so if it's not 100% perfect it's not the end of the world.

[@rickumlauf8744]

I used my router to follow window frame to cut out aluminum

[@adv3ntur3ing]

You are far braver than I am! I bet it worked well though!

[@chorlee3832]

Where can I purchase the radius jig?

[@adv3ntur3ing]

Here is the set I got on amazon: a.co/d/cIjRRFO

[@richardb.dickman9670]

Ditto to the comment donnathomas3977 above.

[@adv3ntur3ing]

Thanks!!