WANT QUICK & FASTER HONDA CLICK SCOOTER? Try the NCY TORQUE DRIVE - Review

[@jamest.5001]

Nice, I ordered just the adjustable sheave, for my 139qmb, from NCY , it says for DIO, I guess they are a lot that are the same, I can't really tell a difference, but I got no paperwork with the sheave, not even a box, it was covered in dust, could it be a knock off? It says NCY, you never know these days! I have done about everything possible to get more power from the qmb, it's bored to 81cc, ported head, intake, and matched, a decent exhaust, I'm starting to think maybe the previous owner added gears, but I live where there is alot of hills, and weigh 3x what he does, I have to spin 10k to get 55mph, but I'd be happier to be able to maintain a cruise speed around 40-45! Over a peak speed, on flats or slightly downhill, with nothing up hill, I think my enginrvmay be down on power fue to a slightly low compression, but my gauge may be wrong, 155psi, I figured it should be closer to 170, I'd like to get it to about 200-205 psi, and run around a 100 octane fuel, maybe a water methanol injection for the steap hills, to prevent spark knok, detonation, maybe make a slight bit more power! I don't guess the little qmb/gy6-50 is the best if you want power, a 150cc swap, gy6/QMJ with a 63mm bore, maybe a 4valve kit, it should do 70mph, maybe better.. Sustaining 35-45 should be easy! I'm wondering what groove is better for what? In the pulley , over stock dual angle? I think a engine with 170-180+cc would be more fun to ride, and much safer, I worry about getting ranover, ppl here in the US drive crazy! Especially when I'm crawling up a 45 mph hill, at 15-20mph!

[@evoemperor3776]

Kaya pala stagnant muna top speed ko sa 110 saka mag 120 eto lng pala problema🤣 ganda ng review paps may natunan rin ako

[@martinjohnbarrios9986]

Nakabili ka boss? Di ko makita sa shoppee

[@emantenorio5066]

Paps.. pa Review naman ako ng Old PCX spring.. na Anti dragging daw sa Click ntin.. kay Ryo and MJ.. #RideSafe

[@VidzMoto]

yes sir. yan gamit ko sir. maganda cya. wala dragging

[@emantenorio5066]

salamat paps.. plano ko kasi pakabit ee.. ! pa Shoutout Next Vlog ! RS paps! #Vidzmoto

[@mcg0894]

@@VidzMoto anong spring po sir?

[@juanrogeliolugo8620]

Paano po naging 900rpm ang clutch spring nyo sir?

[@harveyferia6636]

Sir mas malaki ba ang buka niyan kesa sa stock?

[@nelwindg]

ok lang ba magpalit ng racing torque drive at palitan n rn ung pulley sample kng my mtrt or jvt or other branded ng cvt wla bang iaadjust sa ecu or itotono po plug and play lng ba cia

[@johnpaulhidalgo9196]

Bosing ano yun bell mo at Pulley set?

[@shawlokullafu6742]

Anong bell po gamit nyo?

[@TheSunnySuttons]

Can I add it to a Honda Zoomer x?

[@ailleshanayabattad8946]

Same Lang ba torque drive ng pcx at click

[@MAXIMUMTOLERANCE]

Fit ba sa click 125? Sana masagot. Thanks

[@omharsuper894]

Yes sir pang 125 at 150 po sya

[@oneunbeatable5000]

paps san ka naka order nyan sa shopee? wala ako mahanap sa shopee eh

[@andyavila1982]

Pede po ba yan sa click game changer 125? Same po ba torque drive ng ver 1 and ver 2?

[@VidzMoto]

i think pwede sir

[@jaz2relaklaang586]

That will.not affect the speed ..kung palitan mo gearings mo may epekto...sa starting lang yan mabilis niyang ipitin yung belt😎

[@johnmanuel554]

ung click 125 ko nag 115 dating 108 ang topspeed center spring 1000 rpm cluctch spring 1000rpm jvt pullet set stock torque drive sun clutch assbly (nmax) clutch bell NCY

[@GoogleAccount-z5s]

7 kph lang na increase eh hindi po ba sayang lang money sa upgraded parts plus fuel consumption?

[@jorrybael3841]

Sir, please elaborate more about 45 and 50. Salamat po.

[@PapiJoshTV]

45 for acceleration, 50 for top speed yan para ma gets mo kaagad

[@jorrybael3841]

matagal na to HAHAH thanks anyway@@PapiJoshTV

[@xtianmae5285]

Sir anu brand ng side mirror nyu ?? Slamat po

[@QWERTBVCXZi]

Sir anong lining gamit nyo? thanks

[@patrickjhonvargas3564]

Boss iba ung pang m3? Walang pa 50degree?

[@rambertginez8385]

boss pang pcx torque drive?

[@paultan7698]

boss ncy pullet set vs proj fi ano payo nyo mas ok. at san makabili ng mura n legit slaamt in advance bossing

[@reydealday7001]

Sir ano maganda na torque drive ncy, jiso, sun o racing monkey?

[@VidzMoto]

so far ncy lang ang na try ko sir. ok naman ang kanyang performance. pero im not sure on the other brand, kanya kanya rin po kasi yan na tono rin.

[@QWERTBVCXZi]

anong lining gamit nyo?

[@haroldbulala5196]

Idol vids ano gamit mo center spring?. Bat 1000rpm nalang?. Diba ung old pcx spring 1200rpm un?

[@VidzMoto]

hi sir, naka high speed gear ako sir yung 13th tooth gear ako. mas hiyang ako sa 1000rpm sir. konti lang difference

[@haroldbulala5196]

@@VidzMoto anong brand nang 1000rpm mo sir?

[@rodereijansanchez1849]

@@VidzMoto 13t or 14t?

[@VidzMoto]

@@rodereijansanchez1849 13t sir

[@rodereijansanchez1849]

@@VidzMoto diba stock ang 13t? 14t un racing monkey na pinalit mo nun?

[@chauvoduy9350]

Please ask me that this torque drive affect to 110cc engine 😁😆

[@berserkerjay1231]

Boss saan kaya nkakabili ng oring o And oil seal nya thanks!

[@ronieljalbuena4533]

paps gd am, yan di ang problima ko parang walang mabili na o ring yan. iba kc yung sa stock.

[@bokssvlog1035]

Sir vidz,, SAAN mo po na order ito ano po store

[@VidzMoto]

Sa Shopee Sir

[@stepheneclydetingson462]

Sir pahingi ng link hinde ko makita sa shoppee 😌

[@χιση-ζ4ψ]

anu brand ng 1000rpm center spring gamit mo dito paps? kamusta din naman review mo ng CLD Racing 1000rpm center and clutch spring?

[@VidzMoto]

Paps Stock center spring and 900 rpm clutch spring lang gamit ko dyan. yung CLD for review pa, ill post a video soon

[@arvinjohnroallos4821]

Ano full cvt set nyo sir idol ?

[@deejtupaztv5394]

sir wala na ako mahanap neto.. may ma recommend ka po ba na iba bukod sa stock?

[@VidzMoto]

try mo RS8 sir

[@iamidiot252]

Ano po name ng seller sa shoppee.. mag order po sana ako

[@jbspamoto5641]

sir! pwede kaya yan sa sa honda click 125 v1

[@VidzMoto]

yes pwede sir

[@vincentjaynielsen3004]

Paps kamusta ung gearing mo??

[@VidzMoto]

sulit sir. maganda performance ng racing monkey 13teeth gear

[@janharveyserquina2019]

Sir saan mo naorder yan pwede makahingi kung saan mo nakuha

[@chanocayabyab5751]

Sir pwede din ba yan sa adv 150 ?

[@VidzMoto]

na try ko sir, pero pag pag ang belt

[@danilocastro3365]

Next MKN mkn torque drive assembly

[@franciscruz403]

Sir kamusta naman po performance ng big pulley mo? Sumasagad po ba belt? Salamat po

[@VidzMoto]

hi sir as ive check, hindi ko pa nasasagad ang pulley. pero so far maganda ang acceleration.

[@jonardmalcampo4063]

Boss anong brand ng center spring mo?

[@VidzMoto]

sir gmit ko ngayon CLD 1000rpm center spring

[@dalevincentsantos5394]

Boss pwede ba yan sa 150i v2 game changer? Salamat boss.

[@VidzMoto]

Pwedeng pwede sir

[@dalevincentsantos5394]

@@VidzMoto thankyou sir!

[@jesreelpaz6536]

mas ok b yan kesa s koso

[@paulangelolaurente8505]

Sir ok lng po ba mag palit ng racing torque kahit stock engine? Thanks po

[@VidzMoto]

yes sir, no problem naman po

[@XerxThor]

Keep it up paps.. 😎👍

[@wacas6222]

,ayuz! sakto plano q bumili nyan para kompleto nah panggilid ng honda beat street q. jan den aq nag-TS sa mabitac straight. hehe... salamat sa review paps. dali maunawaan. pa-subscribe paps hane?

[@euridemotovlog116]

magkano bili mo sir, pwde pabulong?

[@VidzMoto]

3600 bili ko nyan sa shopee sir

[@euridemotovlog116]

@@VidzMoto salamat sir ridesafe more reviews😁😆

[@bordspogi3541]

Idol new subs. Mo po.. Ask ko lng kung ok mag palit ng gear kahit stock engine click 125 slamat

[@VidzMoto]

yes sir, wala nama pong problema, yung sa akin naka 14T ako, ok naman swabe naman po.

[@Germlin_boy]

Paps.. magkano lahat lahat nagastos mo para sa upgrade???

[@VidzMoto]

paps, 3600 yung torque drive and labor sa pagkabit mga nasa 300.

[@lotlottolentino7292]

Paps ..anu b.maganda para.ma Tangal yun dragging ng click natin

[@Germlin_boy]

@@VidzMoto san ka nakabili at nagpagawa paps. After ng lockdown balak ko na upgrade pang gilid ko

[@VidzMoto]

@@lotlottolentino7292 hello sir! maraming cause ng dragging. 1 yung flyball mo upod na and yung slide piece mo maalog na. 2. yung clutch lining mo hindi kumakapit sa bell dahil madumi na. 3. yung clutch lining mo madumi at hindi sabay ang buka. Usually ang ginagawa is nag papalit ng bola kung upod na. Also change your clutch lining into racing clutch yung makapal para kumapit ng husto sa bell. also clean your cvt system every 2-3mos. para smooth lagi ang takbo. hope it helps.

[@VidzMoto]

@@Germlin_boy dun ako nag papagawa kina Ryo and MJ sir sa binangonan. yung pyesa sa shopee ko lang nabili yan

[@martinjohnbarrios9986]

May link ka sa shoppee paps? Di ko masearch eh

[@VidzMoto]

paps try mo tanong sa JDO Motorcycle kingdom facebook.com/jdomotorcyclekingdomtrading

[@yonko3476]

Magkano at saan nabibili lods?

[@maynardvincentvaldez255]

Sir kamusta yung performance ng NCY Td mo ngayon simula ng nabili mo? Tia

[@VidzMoto]

hi sir, still ok naman yung torque drive almost 8 mos ko cyang nagamit before ko na benta yung click ko. best for daily use and may konting dagdag torque sa click. not much pero sapat na basta na tono mo yung bola

[@redsujtv3516]

Ang ncy ,.pag tumagas n Wala Kang mabibilhan Ng oilseal nya....

[@jllimba2483]

may link po ba kayo sir pa pahingi po salamat💙

[@matthewnorris203]

I like the intro song

[@nitori861]

link ng shopee bossing

[@johnlawrencemartin5076]

Idol pa link naman san mo nabili. Salamat!

[@VidzMoto]

paps sa shopee ko lang yan nabili

[@HansLotap]

Paps palitin daw ung oil seal nyan. Kada kelan ang palit?

[@VidzMoto]

depende sa gamit sir, every 4-6 mos dapat ma check

[@kayearias8772]

Hindi naman po ba mahirap maghanap ng oil seal para diyan?

[@kayearias8772]

@@VidzMoto paps dame ako nababasa na review sa ncy td hnd daw ok??

[@VidzMoto]

@@kayearias8772 uu madami paps, make sure na original ncy torque drive ang nabili mo. yung sa akin wala naman problema. till now yan parin gamit ko. mas gusto ko yung laro nya compare sa stock ko. pero riders preference lang naman yan sir. if mag uupgrade ka, i pang last mo na yan. invest ka sa pulley at bola and springs. :) mas makakatipid ka sir. :)

[@joelbalde1749]

New sub bro

[@nabilmohammad1818]

Magkano bili mo sir

[@VidzMoto]

3500 sir sa shopee

[@bryanbangon6717]

Kumusta performance sir?

[@VidzMoto]

@@bryanbangon6717 maganda sir lalo na kung nakabig pulley ka

[@VidzMoto]

@@bryanbangon6717 maganda performance sir, lalo na pag naka big pulley, mabilis at linear ang takbo.

[@joelbalde1749]

Ito hinahanap ko sira ang ball bearing ng v1 click ko ..di makuha ang ball bearing ..

[@lostdream4578]

bro, you should put a sub bcs not only philippines ppl watch your video

[@VidzMoto]

I will bro, thanks for the tips.

[@marlonmacaraeg2224]

Link naman po Sir Salamat 🙏

[@VidzMoto]

shopee.ph/product/93730994/2873423494 yan sir, pero check nyo rin sa lazada baka may seller din. Meron din po sa JDO Motorcycle kingdom dito sa Pasig

[@adobofrostzerotwo]

@@VidzMoto sayang sold out na :(

[@nabilmohammad1818]

Pasigaw ng pangalan sir

[@bossjakong]

Sir pasok ba yan sa pcx 150 ?