Warhammer 40000: Space Marine 2 | 4K Ultra DLSSQ | 285K 5.8Ghz + RTX 4090 + 9200MT

[@sugi0lover]

testing the beginning part of the game~ [Game Setting] ○ Resolution : 3840x2160 (4K) ○ Graphic Quality : Ultra + DLSS Quality [PC setup] ○ CPU : Intel Ultra 9 285K : All cores P 5.8Ghz / E 5.3Ghz / Ring 4.3Ghz / NGU 3.6Ghz / D2D 4.0Ghz ○ Ram OC : 9200-38-54-44-72-720-2T (Gear2) ○ VGA : RTX 4090 ○ MB: Z890 Apex ○ Monitor: SAMSUNG G95NC (7680x2160 240Hz) ○ Cooling: MO-RA3 420 PRO (CPU, VGA, Ram) - CPU delid & direct die water-cooled - VGA liquid metal applied & water-cooled - Ram water-cooled

[@Trailerofdead]

WTF.. your PC is so cold 😎😁👍 Best friend!!

[@sugi0lover]

kzbin.info/www/bejne/laHQn6duicidfZI

[@MrJB327]

It's a pity you don't have tests of your previous platform in Space Marine 2. How much power consume your CPU?

[@sugi0lover]

Afterburner doesn't support cpu clock and power consumption, so I don't know.

[@MrJB327]

@@sugi0lover understood. Thanks

Looks and plays great. Do you think 9200 MT/s is doable on air? Also what capture device do you have?

[@sugi0lover]

As long as you can keep ram temp under 45C, doable. My capture card is Elgato 4K60 S+, but I used Nvidia shadowplay to record this.

@@sugi0lover Awesome, thanks. Would you have an updated run of Horizon Zero Dawn Remastered benchmark @ 1080p Very high? I heard that the game version 1.1 improved performance. Also do you see any variance between runs of different benchmarks? Some folks keep saying that Alder Lake may show a variance of up to 41% between test runs.

[@sugi0lover]

I have not tested updated HZD Remastered bench.

[@captainlooney4356]

I was wondering how that OC 4090 was getting 40C with that extra wattage. External RAD makes sense now... Mine would be running at 50C+ and can only clock as high as 3060MHz.

[@sugi0lover]

@captainlooney4356 I can push 3150Mhz Vram+1800, but didn't push higher this time becuase it was test for 285K setup.

[@LeoBdeF]

Why did you stop using the 4090 + 6900 xt (AFMF Plus) configuration?

[@sugi0lover]

I used up to 4090 + 7900XT just for testing. There are goods and bads. but if post frame generation is needed, lsfg is better for 4090. But I overcloked 4090 to max and use it alone waiting for 5090.

[@LeoBdeF]

@@sugi0lover Same here, waiting for the 5090. LSFG is so much better, really? I'm an emulation fan, and LSFG for RPCS3 make a lot of distortion, specially with Spider Man Edge Of Time, deform the head when you move, but the new version of AFMF make the images ( for me ) so much "stables", i know what i mean? I have an ASUS TUF 6900 XT OC. ... But, make what is the best for you. Tnks for the answer.

[@sugi0lover]

@LeoBdeF I am talking about 4090+7900xt afmf2 vs 4090+ lsfg. Tha latter was better for my test, especially input lag. But people have different setup, so can have different experience.

[@sugi0lover]

@@LeoBdeF kzbin.info/www/bejne/gomVn5Wij7J-nLcsi=LaSJ2-q9zCbnJNJL

[@LeoBdeF]

@@sugi0lover Tnks. I will try again.

[@Trailerofdead]

Please tell me how high do you have your fans set or how high are your fans running?

[@sugi0lover]

I set my fans max because Mora is out on balcony while my pc is inside the room, so no noise even at max. Check my old system video. kzbin.info/www/bejne/laHQn6duicidfZI The ambient temp is the most important factor. But my room ambient temp and Mora ambient temp are quite different. My room ambient temp is 23~25 for all seasons. Except the summer season, my Mora is out on balcony, so the ambient temp for Mora nowadays is like 17C. During the summer, I set cooling air from AC go through Mora first before spreading to the room, so the ambient temp for Mora during Summer can be like 20C.

[@eblanueblanovich8902]

Temperatures are very low even for direct die. Is your 285K overclocked at stock voltages?

[@sugi0lover]

All core P5.8 E5.3 setup requires around 1.40v under load. My external radiator can keep coolant temp below 20c nowadays.

[@juice7661]

@@sugi0lover Isn't 1.4v high for tsmc's 3nm?

[@sugi0lover]

@@juice7661 I don't know. But I have used it like since the beginning of Spetember as a tester, and I have no problem so far.

[@electrolightning1998]

How does 285k perform compare to 9950x overclocked?

[@sugi0lover]

@electrolightning1998 I am sorry that I don't know. You should check the other channel dealing that kind of stuff.