Was This Trade Deal Too Good To Be True? (Risky Trading)

I do a trade that might be too good to be true. #Trade, #Honda, #Risky,
►SUBSCRIBE: / @2vintage
►MY SECOND CHANNEL: • New Polaris ATV Snow P...
► ADD ME ON ALL SOCIAL MEDIA ◄
► FACEBOOK: / 2vintageyoutube
► INSTAGRAM: 2_vintage_ / 2_vintage_
► SNAPCHAT the2vintage
► EMAIL FOR BUSINESS INQUIRIES ONLY: [e-mail]
Thanks for watching and subscribing!
New videos every week!
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. 2vintage( Joe Weber, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL 2vintage( Joe Weber) CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
2vintage (Joe Weber) makes no representation about the sufficiency of any safety precautions and equipment used in this video.

[@Chris22967]

Cracked me up when you pushed the Quad of the trailer and had to run after it 😂I'm glad you don't edit things out like that.

[@2vintage]

Hahaha

[@jasonrutherford1722]

he keeps it real! what a score

[@murrayminimotors1674]

Thought he lost it 4 sure!!😅

[@Harry-gf7ox]

!!! 🤣🤣

[@wisecampmotorcycles8258]

That seller wasn't "to sure" about anything you asked him 😅, buyer beware.

[@ALMIGHTYGARAGE]

Scam

[@thomas7770]

Stolen

[@neal2608]

I think he was a bit drunk TBH.

[@re9947]

Where did the guy steal them ?

[@jibnerjuarez4288]

Cry more ppl

[@kurtgandarillas8618]

89 cr 250 comes factory red frame. Frame was painted white. Pro link is the suspension style. That's a factory swing arm painted with an oem Pro link sticker on it

[@justinm6110]

I was loling when he said ' you think its a pro-link swing arm'

[@adriantowe278]

I agree with you I would say its powder coated white

[@ajc5370]

There was an 89 90 CR250R that had a white frame, it was rare but they were out there. At the time it was inspired by the Pepsi endorsed race bike

[@petepeabody8905]

Vinny is a great dog who knows his machines. Always interesting and fun to watch you work

[@2vintage]

He is a great dog!

[@markmeier4206]

@@2vintage What kind of dog is he? He looks like a mini goldendoodle.

[@ejtakach]

As a regular viewer, I am inspired by your work ethic. I find myself more dedicated to executing the details needed to successfully complete my projects. Keep up the good work Joe. And get a bigger shop!

[@orionwarren4244]

He's got plenty of room to blow out the side his 'space' is in on that garage!

[@murrayminimotors1674]

Same here always watch... GREAT learning experience 👍🏾!!

[@whiskeyairsoft1729]

Jesus loves you

[@shawnmosleh2363]

Shut up

[@rodmanners]

Thanks for the great content.... Love watching your progress on fixing machines that i would have thrown in the towel on. You have great patience in the diagnostic process.

[@marinetodd06]

$2k for the CR 250? I'll buy it from you right now as it sits.

[@wvangus82]

Nice trade! The valve buckets on those 5 valve heads always get stuck. That 150f is really clean, you can tell it wasn't ridden much. Can't wait to see how the cr turns out!

[@josephcarino5829]

Old men up here in upstate NY. We all have xr100's or 150's. We have bigger stuff and smaller stuff but we have more fun on those small xr's. They are a blast

[@adseish]

I absolutely love your series keep up the great work man!

[@twodogsyyc6729]

Luv the 150F big time, we never see them up here used. Good trade for sure Joe. Made my Sunday

[@clemcon501]

Love them too. I had one when i was a teenager and rode the piss out if it 🤙

[@riley_swan]

What a great deal! Those banshees sell for so much nowadays and you can trade them for a lot of stuff! You’re rippin out the content for us!

[@patrickloper9658]

i have a 2000 es honda that keeps back fireing whats rong

[@PocketsRides]

@@patrickloper9658 Probably needs a good carb clean. If that doesn't help it probably needs a valve adjustment.

[@paulsoul9585]

The frame is not a one of a kind on the CR It is just painted white. The Pro Link suspension is just what honda called their rear linkage system, its not an aftermarket performance part or anything. That guy don't know sheet!

[@dustinfogle6215]

You definitely got an amazing deal! 3 very nice machines for 1 decently nice machine. Definitely got the winning hand bro.

[@IamBATMAN2024]

Banshees are blowing up big in value now. There aren’t so many of them.

[@goodchannelname4046]

@@IamBATMAN2024 Also had a bad vin

[@IamBATMAN2024]

@@goodchannelname4046 it can be fixed 😅

[@ethanlamb1657]

The quad rolling off the trailer is prime comedy…

[@2001pontiactransam]

I’m impressed by your Full Send mentality, hard work and drive for what you love, completely enjoy watching your channel. Only thing your going to need before you know it is, based upon your drive, a new pole barn lol!

[@Dirtybirdy81]

I've been watching you for a long time and it amazes me just how far your knowledge of ATVs and bikes has came hats off to you my friend

[@kenjohnson5498]

I hate when someone throws a graphics package on and then wants to add the price of that on top a polished turd. We find those a lot were i'm from.

[@leewaken5059]

Try using a specific sized coin and pliers to remove those "straight slot" inspection side cover screws. Hate seeing them all butchered.

[@shardsoldier]

love all your videos keep going, learnt a lot from you :)

[@peteraitken6494]

Haha loved you running after the quad joe I think you got a great deal there mate and had vinnys approval too lol quad is sounding sweet and so is the 150 very clean machines all in all has any of your neighbour’s got a for sale sign outside there house yet 😂😂😂take care man awesome videos as always 🔧🔧🔧👌👍

[@jetstreek17]

one of the thrills of my day is watching you unload vehicles from trailers and trucks.. when they hit that point of no return things can get crazy.. Thanks for bringing us along Joe.

[@paulfestmusic]

I hope your paying attention to having good ventilation in your garage. I’ve been watching several of your videos and I worry about your health (especially long term). Please consider getting a carbon monoxide detector if you don’t already have one, and remember to get lots of fresh air in your shop if you’re gonna be running those engines inside like you do.

[@Fox250R]

Lol

[@Harry-gf7ox]

!!! 🤣🤣🤣

[@mikebuzz5784]

You should do a video taking your jump starter apart and removing that buzzer. I’m sure it will work fine without it. Lol. Love the videos by the way. 😁

[@christaylor2168]

You did great on that trade. The other guy got a good running machine he will have fun with. You got three to do what you do best. Bring new life to broken machines. And we get to enjoy watching you have so much fun and grow your collections.good times for both you and other guy.

[@johnbest4320]

Great video Joe I think you done a wonderful trade 1x quad 2x bikes for the Banshee is great deal gives you 3 videos for the channel and they all look in pretty nice condition especially the crf 150 definitely a low hours bike and there really fun to ride interested to see the next video and the cr 250 looks really nice aswell hopefully that runs and just needs a little bit of tweeks here and there great job on the yfz 450 with the valves and chims great to see vinny approved aswell have a great weekend take care bud 👊 💨

[@jeremyTallen1]

You need a website for everything you have for sale.

[@andrewholbrook8830]

New sub, love your video very informative respect and thanks man!

[@Stergos69]

Awesome job as always, question what do you do with all these machines, yes I know you trade some and Im assuming you must sell a few here & there, Would love to see your whole collection again.

[@thestrauser]

These videos are great , really goes through step by step diagnosing

[@Oheeeoh]

Man you're lucky to be able to leave nice bikes in the back of a pickup overnight. I live in a big metro area and would never try that. Too many thieves around here. Thanks for the video.

[@VURGINN]

It’s the bleks

[@samve6872]

@@VURGINNthem basketball Americans

[@greathornedowl3644]

Amazing the way you confront challenges. Reviving classics when most of us live in a throwaway society, "it's broke, let's buy something else." From working in Dentistry, ERGONOMICS - you need to give a lift to save your back

[@jasonjones4891]

Yes,but if there weren't throw away type people there would be junk for us to fix.. big circle

[@passenger6735]

Folks are afraid of shimming and until people learn how to shim valves you'll always bag a bargain. I have to say I thought you'd come a cropper on this trade as the guy just was not committing himself to any straight answers whatsoever. This was a real good trade in the end. Well done.

[@coltensallazzo]

The pro link swingarm is stock on the 250 and the frame was painted white. The yfz has a lowering kit in the front. The shocks should bolt straight to the a arms, not thoes brackets someone put on. And that fuel line going to the carb on the quad is not a fuel line, it's a gas cap breather. Replace with a straight piece of fuel line. You don't want all thoes bends in the line.

[@e5m956]

It's strange to me that someone with such mechanical know-how wouldn't know that or what Ohlins shocks are lol.

[@T0tenkampf]

@@e5m956 i didnt think those were stock shocks lol

[@shartne]

No risk no gain. I hope you can get them running good. Nothing ventured nothing gained. It was a great deal for you. Electric start on the Honda 150 priceless.

[@jonathanwalunga4284]

You're an inspiration to me. I think I have the aptitude to work on ATVs but I need a good master mechanic to teach me. I live in a place where all we use is ATVs. I don't know how much I can do cause I have a bad back and a shot arm. I currently need all my ATVs worked on. I've been looking for someone to fix them.

[@colebernal6608]

I have a 2004 Yfz 450 and the position sensor on the thumb throttle went out so it wouldn’t do anything like when I would touch the throttle it would just die and it wouldn’t idle at all

[@noahhanson9009]

That’s crazy I posted my raptor 700 on Facebook and this guy wanted to trade that 450 for it

[@robertcraft8945]

Man I wish I lived closer to you bud, your very good at what you do. And that was a great trade. Hoosier Wing 🌟🇺🇸💫👍🏻

[@carlmay3396]

Hi I have been watching a lot of your videos and learned soo much about small engine rebuilding. Your videos are like a master class on motorcycle repair. I'm also not ashamed to admit I'll never understand how carburators work, they make absolutely no sense to me lol. I also wanted to ask about something else, some of the motorcycles you repair don't have valves like that old 125 you rebuilt. I'm curious what advantage valves and cams give you over the older way they built 2 cycle motors with out them? Is it more horse power and better fuel management? Just curious. Thanks for your videos and all of the great information.

[@2vintageDeamonFan]

Always make my day when you post

[@bismarcktorres8747]

Obviously you know what you’re doing, awesome video. Wanted to ask u for advise, I have a 2004 Honda TRX450R. It runs good most of the time but from time to time it will start leaking gas from the one hose underneath coming from the carb and it turns off and i struggle to start it back up as if I was flooded I think but it will leak fuel non stop if I don’t close the valve. Give it more than a few kicks with valve off and it will start then I quickly open the valve again and have to keep pushing the throttle till it settles again

[@That1E_K1129]

That 250r is one BAADDD BIKE! Them 150's are wheelie bikes all the kids around my neighborhood have them and their always on one wheel down my street. Those 150s even being that old still sell for around 25 to 3 grand in my area

[@fishn365]

Very much enjoying your work. Saw the ice fishing stuff..been doing it since 84!

[@johnnyp4886]

love your vids..just wondering how you insure the things you buy aren't hot (stolen?

[@mississippimotorsports3286]

The 150 is the real hidden gem.. it’s clean.. 2k easy

[@adamtyson1728]

I just have got a 09 wr 300 husqvarna and got a good deal on it it's a very strong running bike it's a 2 stroke.

[@Braaaaplife]

I crf150s are going for 2500 to 3k here in Chicago very hard to get

[@ArtVandely85]

you should make yourself a nice place to unload things from your truck. Use your machine and make a berm to back up to. it would be much easier to load too. Your next truck needs a full size bed. It looks mini.

[@bobbymckinney1264]

Sweet deal,we all love them banshees,but you won on that deal, that cr is nice,man you rocking it,good video man

[@ajc5370]

Man what a beautiful home site you've got there! We just don't have land like that in Tampa anywhere!

[@bryanslittlegarage5724]

You can take compressor and blow through the fuel line and it help with sticking float and blow out jets. just a quick fix of course

[@kennyturner2615]

Love your videos and i got to give you praise for how mechanically inclined. You should have been an Engineer. Have to ask how do you avoid stolen bikes and your procedure if you end up with one.

[@Xtraweak]

You could sell that 150 for 4k in my area lol. No matter where you are that was a good deal

[@jmc5341]

That cr250 never came with a white frame. It was painted at some point. Along with the swingarm

[@martintaylor984]

That CR is awesome

[@2vintageDeamonFan]

Always a great day when joe posts

[@jefferybuchan4235]

Nice trade, would not mind having the CRF150. The yzf is a nice looking machine. Great trade for sure. on those two alone.🙂

[@craigmorgan4676]

Crazy Joe ,that dude sounded sketchy af there brother!🤔👏👏👊💪💪💪

[@joshosceola3560]

Bypass the radiator can switch and install a on and off switch. Save your battery and fan.

[@danielwalsh7310]

Hi love the channel. Do you need a to re jet if you big bore??

[@2vintageDeamonFan]

Guy was sketchy asf

[@gman77gas]

Guy keeps sayin..I'm not sure...

[@Gooftroop2756]

@@gman77gas Maybe the guy jus have little to no knowledge on it.

[@cazsomething9433]

Definitely not telling everything he knew. Does the 2 stroke run good or needs a rebuild, I don't know... but you drove it around... does it have power or is it lacking.. lol

[@mr.channel6467]

Decent deal

[@siwy482]

​@@gman77gas😊😊😊00 😂fffffffffffffffffff

[@just_golds]

I haven't had motocross bike since Santa swapped my little italajet 50cc for a B.M.X one Christmas morning (never really forgave him for that,even at 7 years old i knew it was a bum deal)....but anyway like I said I haven't got a bike but really enjoy watching your channel,watching you get the trades and fixing them without knowing sometimes what the issue is,it's addictive and then seeing them fixed and running perfect,I think it's great.🤙 🏴󠁧󠁢󠁷󠁬󠁳󠁿

[@ShadyAcresMotorsports]

I see a set of lug spacers on the front. Those are a little sketchy but they look like they are just 1 inch so not so bad. I got a banshee recently that had like 2.5 inch lug spacers on it all the way around. Super sketchy!

[@ItsYoBoyGameBoy]

What's the brand of the stand you use for your bikes? I would like one for mine

[@dalelangley1604]

That's just one of the great things about 2 strokes ; top ends are cheap and easy....👍

[@jjjuarez312]

Good evening it's 4:10 Airazona you got a good Trade!! Pretty awesome...

[@farmermann2335]

The jet in the bowl for the accelerator pump is reverse from what you would expect. The smaller the hole the more fuel it pumps so being completely clogged would be alright. Its basically a bypass back to the bowl when the diaphragm pumps

[@farmermann2335]

@text-1203 bruh lmao

[@sandmanbub]

Everybody's got Banshee fever lol. I love 'em in a straight line, but take one to the track (motocross) and see how they do. They don't handle at all well and a little 4 stroke will blow 'em away every time. If some one were to install a Banshee engine on a modern frame, one with racing suspension tuned for their weight and riding style, they'd have one Hell of a racing machine on their hands. You got a great deal on your trade Joe. Wanting to see what you find out about the bikes next.

[@andyleaver5578]

Cool trade 3 for 1 amazing. Have you thought about getting a jet ski as you are so close to a lake?

[@bigbullhorn8443]

Your reaction of quad coming off trailer was priceless. She Gone!!!!

[@dubcab6039]

Man good trade , so far can’t wait to see last bike up and ripping

[@theboogieman401]

What banshee did you trade ? The 800$ one ? That's a deal of a lifetime if so.

[@countryboyhen7246]

I know this is off topic 😅 but what size is the trailer you used to roll the quad off?

[@recklessrejectscc]

Would’ve def kept the banshee in my opinion.. bikes are gold!

[@user-ds6uc2hx3f]

I didn’t realize a banshee was so valuable…..nice trade!

[@SantaClaw]

Do us a favor, and fill the beeper on your start booster with glue.

[@shayneteynor2191]

I'll take the 250 that is nice!

[@michaelfuse4358]

Love watching learned alot iam 52 still love riding I have a2005 blaster nice shape looking to find a bike the blaster hard to start it has a 310 jet I think it's to big what do you think.

[@craigcolburn8016]

With the quality and resale value of Hondas. I would definitely say you got a good deal.

[@reggiexp69]

yeah with that crf150 it made the deal worth it but just the cr250 and yzf 450 are not worth a banshee in my country...

[@chriscallas9483]

Nice 3 for 1 video. If u wanna keep the fan hard wired to the ignition just make sure u keep it in a small battery tender or just a cheap trickle charger for sure. If not a new batt will be dead in 1 to 3 mo.

[@paulmgagliardi]

I think you did well!! Great content :D

[@MattiasE]

Really nice deal Joe 🙂 Nice bikes.

[@j.j.clingman4083]

Man you definitely have some really good luck for sure!!! If I would have traded I would have been even lucky if one would have ran!!! Lol!!! Well remember keep up all the hard work buddy!!!!

[@louisjohnsonjr.4934]

Love the 89. Nice looking bike.

[@superdavessubiandmore823]

You fixed the neutral light to, I didn't see it on before.

[@paullesarge4126]

Excellent video, looks like a good deal for you. Seller sounded a little shady however?

[@NemesisGrowz]

That dog knows his quads bro 🤣

[@elekid330]

20:30 the spark plug is missing the little cap that helps it snap into the boot

[@donksscatpack6766]

YFZ runs a "C" series plug without the terminal cap

[@iRuNsBlack]

Try to find a KTM 525 xc , would love that ! Keep up the good video !!

[@spaceoven8788]

do you have any videos of you replacing valves on a ltz400 or anything similar i really need help with this project

[@notpreffered4771]

Nice deals man! Your such a great inspiration and whenever my girl tells me I buy too many bikes I show her how many you’ve bought in the last month ! You never fail me 😆

[@TheHemiphil81]

That cr 250 is going to be a great bike if you keep it. I raced one when I was younger, they are great bikes........ 🔥

[@sdick01]

I'm pretty sure you've shared this, do you have a link to the jacks/stands you use?

[@zedikiahh1695]

Hey vintage just picked up a blaster for FREE from my good friend it doesnt run and your videos inspired me to work on it

[@RocksNRuts4]

hi what belt r u referring to i missed that part?

[@travisjones4756]

Water pumps on the early years of the yfz 450s are no good and there’s a oil plug that gives issues and the battery is gel batt there junk lol the fins brake off inside of water pump case first year for the yfz450 was 04 they had several problems first 2 or 3 years also had high compression I do believe

[@bismarcktorres8747]

But then it will do it again or sometimes it doesn’t, I know very very little about this kind of things but I like to learn and do it myself. I payed someone one time to get the carb cleaned and see if it would take care of the problem but they didn’t. What should I do? Is this a carb problem or floater issue? Any advise?

[@bdog4u2]

Wonder if there is a big bore in the yfz with the double gasket

[@FourRingsAuto]

I was thinking this morning that Vin must be called Vin because it's close to vintage. If that's the case, great work!

[@T0tenkampf]

vehicle identification number sounds good too

[@robertdavis4184]

You need to come to WV and ride the Hatfield and McCoy trail system. It's a blast