🌎 Washing Machine Won't Fill - Easy DIY - Quick Fix

[@ajayjobanbhatti]

Worked 👍🙏🏼

[@QuickAndEasy5MinuteAppliance]

Awesome, Thanks 😊

[@leslindelgado6124]

I love you, right now. I got my machine running in 5 minutes thanks to this video! Thank you. 🙏

[@QuickAndEasy5MinuteAppliance]

Thanks so much😊❤️

[@tc6846]

Life savor! We've already had this Samsung replaced after the concrete weight for the spin cycle broke just a year and a half of having it. Now just after another 2 yrs water wasn't coming in. Not again lol! You're video saved us from another headache. Thank you!

[@QuickAndEasy5MinuteAppliance]

Awesome, I’m so glad it worked 😊

[@pamelablair4871]

The City turned neighborhood water off to work on pipes, when turned back on a lot of sand and debri came out in the sink, then my washer would try and fill so slow, I did what you said and its fixed! Thank god no repairmen to call! Thank you so much!

[@QuickAndEasy5MinuteAppliance]

Great, Thank you

[@valerieee3p]

Hoping to see some sort of comment like this. Our city turned off water supply 2 weeks ago due to a winter storm and today tried to use my washer for the 1st time since. Water drizzled into the machine so slowly. Wondering if this is this issue. Thank you!

[@beenrealubitch24]

Well I'll be darn my city turned out water off for about. 5 hrs in the middle of night few nights ago. I just now went to go wash and only got water side runs cold water side drips so slowly . Pretty sure this will fix it

[@savedanduknowit]

THANK YOU SOOO VERY MUCH FOR THIS VIDEO!! I literally just did every step and this was the issue! I almost spent over $500 for a new washer! Thank you, thank you, thank you!

[@QuickAndEasy5MinuteAppliance]

I love it😊😊😊

[@Arcturian1111]

You have to clean both of the screens in each inlet inside the washer hose inlet on the washer itself. There are two screens for each cold and hot on the washer.. One is inside the machine inlet that you can't see, and one outside the machine that you can barely see, it has a tab you pull out. Use a flashlight and look inside the inlet tube or nipple that's threaded, after you pull the first screen off you'll see it.. My inside screen was clogged bad, so I just took it out with a flathead screwdriver, and eliminated it totally. Both hoses were good, I saved some money, didn't need new hoses... All fixed.

[@melissamccrystal5767]

Ty ty ty for the description

[@valeriebrown3187]

Thank you so much. Very helpful. I have my machine hooked to kitchen faucet and only one hose attached to cold on back of machine but had machine setting on hot.. So it wasn't filling. Because you address a number of possible problems as you move through the video, I was able to solve my problem in Less than five minutes !!

[@QuickAndEasy5MinuteAppliance]

Excellent, Thanks so much

[@mockyp7657]

Thank you for your awesome video! It was exactly the issue with my washer - which filled with water perfectly after a 5 minute fix!

[@QuickAndEasy5MinuteAppliance]

+Mocky P Thanks Mocky, I'm so glad it worked for you😀

[@QuickAndEasy5MinuteAppliance]

+Quick and Easy 5 minute Appliance Fixes Thanks so much Mocky👍 If my advice has helped you, please visit: www.scottthefixitguy.com To make a donation to Scott's Coffee Fund -- Help Keep Scott Caffeinated😀 🌎 Thank You

[@barbarabostian7966]

Thank you so much never tried to do anything like this on my own.That was the problem ,and I am so grateful

[@Juice570]

Thank you very much for this video as you helped me save tons of money on a new washer!

[@QuickAndEasy5MinuteAppliance]

Glad I could help!😊😊

[@WannaBeatle-Paul_McMichael]

I'm gonna try this tomorrow. my washer hasn't worked in about a year now. so, if this works I'll name my firstborn after you - even if it's a girl!!!

[@QuickAndEasy5MinuteAppliance]

That sounds like a deal, maybe Scottina😂😂😂

[@troylepisi]

Update?

[@WannaBeatle-Paul_McMichael]

@@troylepisi I tried it back then and not much improvement (maybe a 10% improvement in reality). I'm going to assume that the issue is something else. I need to have someone take a look at it when I can afford it.

[@troylepisi]

@@WannaBeatle-Paul_McMichael thanks for the update.

[@justkrystel7078]

😂😂😂 good one

[@jeffh123]

Wow!!! You just saved me hundreds of dollars!!! Here in Texas and lost water and power for several days from the hard freeze. When things got back to normalcy, I tried washing clothes and noticed it not filling up the same. I also noticed the agitator wasn't working properly. But because of you and another video, I was able to fix both for under $10 and 15mins of my time. And I thought I was gonna have to buy a new one thinking pumps or motors were the problem. Thank you 🙏

[@QuickAndEasy5MinuteAppliance]

Nice job Jeff, Thank you for your feedback😊

[@BigMike1999]

Thanks for yuh help i will try this when I get home . I just got the washer an dryer today is made my day to a frown .

[@QuickAndEasy5MinuteAppliance]

Might be something wrong with the water supply from the wall faucet.

[@cliftonwashburn911]

Thank you Sir! Got my sister’ washer going. God bless you.

[@QuickAndEasy5MinuteAppliance]

Awesome, Clifton I’m so glad it worked and saved you time and money 😊 I hope you’ll click here to support us by joining our Channel: kzbin.info/door/bQy5UxlvaPPsDHvfvW76JQjoin

[@MarkAStuart]

LOVE IT! This is the second video I watched and I didn't think it would be this simple but it was. Ours was super slow and just swished it out with a tooth brush and now it's like a fire hose. Thanks MUCH!

[@haroldkacanek7421]

it was great to see this video. Saved me a lot of time as I went directly to the source of the problem...clogged..and not go beyond.

[@QuickAndEasy5MinuteAppliance]

Excellent, thanks Harold

[@sandimckey6942]

This worked !!!! Thank you so much for this video - saved us $800 !

[@QuickAndEasy5MinuteAppliance]

Glad it helped!😊😊😊

[@brendasmitherman6928]

I use a spray bottle of water on stream and just spray the hole while holding a dish or towel underneath you won't believe how much stuff comes out

[@QuickAndEasy5MinuteAppliance]

+BRENDA SMITHERMAN Great idea

[@RengokuKyojuro1-h7b]

Omg i wish I would have seen this sooner we waisted 200 on a machine and t h ought it was broken and now we bought another washer and still the same problem and I just seen this and feel like such an idiot. You're awesome. Should have watched you a week ago.. ty

[@QuickAndEasy5MinuteAppliance]

Thanks so much Hilda, all’s well that ends well😊

[@blackwell5150]

It worked. You are my hero, sir.

[@QuickAndEasy5MinuteAppliance]

+blackwell5150 Excellent, thanks so much for the feedback👍

[@mananahoyes7485]

Quick and Easy 5 minute Appliance Fixes. i have question.. Can i use the drain hose to also fill washer

[@QuickAndEasy5MinuteAppliance]

+T.Bun2much4u!! b That might work. Some drain hoses only let water flow out. You could try it.

[@mananahoyes7485]

Quick and Easy 5 minute Appliance Fixes.... Hi scott..Guess what..It Worked...Thanks for the video..!!

[@QuickAndEasy5MinuteAppliance]

+T.Bun2much4u!! b Very cool, Thank you

[@Izzy_TheAlchemist]

Wow thank you. You helped me fix something that has been not functioning properly for a week now. Turns out, my 5yr old twisted off the water for the washer

[@QuickAndEasy5MinuteAppliance]

That’s what 5 year olds do😂😂, I’m so glad it worked and saved you time and money 😊 I hope you’ll click here to support us by joining our Channel: kzbin.info/door/GpInAejvpfVVE4FHB_L-Dgjoin

[@melissasanchez1218]

Thank you! I will try that.. It's also not spinning when water drains.. I forgot to mention that. My washer was working earlier today and that's when I noticed it wasn't spinning or filling up to wash.

[@QuickAndEasy5MinuteAppliance]

Thanks Melissa, Can you send me the model number?

[@melissasanchez1218]

It is a Hot Point... Model # HTWP1000M0WW

[@HRTsAFyre]

Hi I'm not gaving probkem with the valve but it's been on a working true for the last 30 years. I am thinking if it's not broke, don't fix it. But a part of me says every time I clean the screens in the house faucets it has a ton of sediment in it. Should I check these valves now or wait until the day they give me trouble? I hVe an old Kenmore direct drive system that I truly love and never want to have to replace. Purchased New in 1987.

[@QuickAndEasy5MinuteAppliance]

Very impressive 😊 I love these washers. I would just keep cleaning the screens.

[@HRTsAFyre]

Quick and Easy 5 minute Appliance Fixes thank you for your reply.

[@dannii08]

Thank you so much, this worked I'm so over the moon :D

[@QuickAndEasy5MinuteAppliance]

Excellent, Thanks for the feedback 😊

[@strongsick2866]

This was my problem thanks .

[@QuickAndEasy5MinuteAppliance]

You’re welcome 😊

[@robertolomeli726]

Thanks so much great information

[@QuickAndEasy5MinuteAppliance]

You are so welcome!😊👍

[@lamassu4100]

I just installed a new water softener, and it clogged few faucets with Resin, including our washing machine, I followed what you did, and worked perfectly, thank you.

[@QuickAndEasy5MinuteAppliance]

Very nice😊😊😊

[@domoniquethomas9230]

@@QuickAndEasy5MinuteAppliance u.6l7l:-!O_o;-):-$:-!

[@MDRMZ87]

Thanks for taking time of posting this video. It helped with my problem, saved me from buying a new washer.

[@QuickAndEasy5MinuteAppliance]

Excellent, Thank you😊

[@amberdunshea3002]

Hi my washer won't fill either. the last load i did worked perfectly. found a lot of fluffy wool on the out of balance stick took that off and moved the bowl back and heard the clicking. turned washing machine on and if filled but then didn't agitate nor spin. so took water out by hand and took agitator off and found there was a lot of water under the agitator. have done what you suggested on the video but didn't work. please help thank you.

[@mizzcorrieancone3077]

you are fab..just fixed this problem !!!being a gal thats too awesome!! thank you so much

[@QuickAndEasy5MinuteAppliance]

Thanks Mizzcorrie, Nice going👍

[@aliyahfrazer9100]

Thank you you're a life saver! 2024

[@QuickAndEasy5MinuteAppliance]

Awesome job😊

[@Drumulater1]

I'd like to know if

[@sunshinejenny777]

Thank you so much!

[@QuickAndEasy5MinuteAppliance]

You’re welcome 😊

[@effiebug4278]

My 37-year old Maytag washer was very slow to fill. Turns out the supply lines were filled with gunk. We cleared them out, the washer works as if it were brand new.

[@QuickAndEasy5MinuteAppliance]

Awesome, Thanks so much Kate

[@effiebug4278]

@@LunarvanaStrike49 I was shocked.

[@goombabear]

My husband cleaned the inlet filters with vinegar and an old toothbrush. Our machine is working like it's brand new now.

[@QuickAndEasy5MinuteAppliance]

+Jenny M Thanks Jenny, It's pretty common that those screens get clogged up and then no water.

[@goombabear]

Quick and Easy 5 minute Appliance Fixes We never had a problem until we moved to the country. It was the well water that clogged the filters.

[@wl6279]

Wow 😮so clockwise is off and counter clockwise is on! lol Learn something everyday 😆

[@QuickAndEasy5MinuteAppliance]

Glad it helped 😊

[@wilrausure6901]

Damn, My cold water has not worked since they fixed my well .. that was years ago. I have meant to check on KZbin to see if someone could help me with this and yet cancer and other things have gotten in the way. NOW was the time. I watched your fix.. clean the screens and WALLA works TYVM. :)

[@QuickAndEasy5MinuteAppliance]

Nice job, and best of luck with your cancer treatments.

[@vomMarischal]

Are there little screens inside the hoses to clean?

[@Jsg172]

Thank you so much!!! Key words: turn to the left!

[@QuickAndEasy5MinuteAppliance]

Very good😂😂😂

[@TheBrandonKia]

Hi Scott I have maytag top load washing machine, when position to wash it makes like humming noise but no water and position to spin or drain it works. I wander what cost ? I checked hot and cold water screens at the back was clean thanks in advance

[@QuickAndEasy5MinuteAppliance]

Thank you, Do you hear humming when it’s supposed to drain and spin?

[@olkagold5566]

It really worked! Thank you!!!!!

[@QuickAndEasy5MinuteAppliance]

Thanks Olka😊

[@samisulaiman7967]

i have Mytag upper filling machine like this one 110 volt and stopped filling I check the hose filters for both cold and hot but it is clean should I change the solenoid valve if yes how to do this thanks in advance .

[@QuickAndEasy5MinuteAppliance]

Sounds good Sami. Are you sure the machine emptied out all the water from the last cycle? If you put your model number in a google search with the term fill valve, you’ll see a few videos on how to replace the valve.

[@samisulaiman7967]

@@QuickAndEasy5MinuteAppliance Ok my dear thank you in arabic : shukran شكرا لك

[@rawdeal223]

Thanks!! You helped me fix mine just now.

[@QuickAndEasy5MinuteAppliance]

Excellent😊

[@troybradley1927]

Thank you!!!

[@QuickAndEasy5MinuteAppliance]

You’re welcome😊

[@douglascarlson9006]

H Scott, Need your professional opinion please ... Just watched your YT VID on the water not flowing into the washer ... you said that unit was producing a high-pitch sound when it was set to run water into it ... but my washer is silent when I set the dial to fill it with water ... I had a repair guy here two weeks ago ... he ran a diagnostic test on it and said it needs a new chip ... but he never got back to me ... so I talked to several people about replacements parts and they said the idea of a washer needing a new chip did not make sense ... they both said it sounded like a problem with the water inlet valve ... but how would you explain the explain the silence? ... if I set my dial to SPIN, it works - you can hear the tub rotate ... your thoughts please. Thanks much ...

[@JD-kf2ki]

How long those black rubber hoses last?

[@QuickAndEasy5MinuteAppliance]

Maybe 8 years. Best to replace with metal braided ones 👍

[@carmac1652]

New subscriber 👍🇨🇦

[@QuickAndEasy5MinuteAppliance]

Thanks so much👍

[@Ievolovel]

What could it be if it starts agitation off the rip?

[@QuickAndEasy5MinuteAppliance]

The washer thinks it’s full of water already.

[@reinaldodejesus4153]

Just did the same thing , I was able to pull my filters out and cleaned them very well . Man was they filled with crap !

[@QuickAndEasy5MinuteAppliance]

Nicely done👍

[@gr33nyplayz60]

Well this saved me money on a service and my missus tried to tell me i wouldn’t find the solution 😂 cheers man

[@victoriaphoenix4999]

Could this also cause the water to keep filling and not stop?

[@QuickAndEasy5MinuteAppliance]

Does it overfill or just keep filling ?

[@victoriaphoenix4999]

It keeps filling

[@johnathanbeats]

What about my washing machine going straight out the drain how can I fix that

[@QuickAndEasy5MinuteAppliance]

Can you send the model number?

[@bullfrogpondshop3179]

My Roper Washing machine cycles back and forth between hot and cold water (1-2 minutes each) during the fill cycle when the "HOT" water setting is chosen. The result is the water in the filled tub is lukewarm at best. Does anybody know if there is a part or parts that determines the length of these cycles? I'd like to make the hot water come out longer and/or the cold come out shorter to result in true HOT water when the tub is filled. A capacitor maybe?

[@clayguy33]

That's a great video! I was wondering however, if you could put me on the right track with these symptoms: Washer fills at a snails pace, BUT if I turn garage sink on full, we can usually get it to fill. Solenoid?

[@QuickAndEasy5MinuteAppliance]

Yep, Either a dirty filter coming into the solenoid or a faulty solenoid.

[@clayguy33]

@@QuickAndEasy5MinuteAppliance Thank you!

[@SandraNelson-gl7jh]

you are a life saver i followed your steps and it worked 🫶🏼 thank you

[@QuickAndEasy5MinuteAppliance]

You're welcome!❤️👍😊

[@jamendoza821]

My Kenmore800 washer won’t go into start up mode(on any of the cycles). It does go into Spin mode(on all cycles) but for some reason it will not start the actual Wash cycle. Is there any chance you’ve encountered this problem before? If so could you please help me out on figuring out the problem?

[@QuickAndEasy5MinuteAppliance]

Sounds like it’s having trouble sensing the load or with letting water in. Can you send a video of the start up to my email at: [e-mail]

[@Neolantis]

I changed the water fill with new solenoids, changed the lines, changed the lid switch with the fuse and switch. Water fill hums, no water comes in. Changing the nob to spin, it engages. Should i change the assembly that has the different load choices?

[@QuickAndEasy5MinuteAppliance]

Can you make sure the water supply from the wall is good and shooting out water?

[@HappyHounds]

I ordered a new inlet valve. I'm got a LAT8426AAE maytag and after just doing a load, it wouldn't fill for the next load. Spurted a tiny bit of water and then won't fill. I am so hopefully this is the problem... Not sure what else it would be

[@QuickAndEasy5MinuteAppliance]

If it isn’t a clogged water inlet valve filter, then you just need a new water inlet valve.

[@markcummings6856]

May I ask if your Water Inlet Valve was the culprit? I have similar problem I believe as it just adds water for like 3 seconds and just stops. I was thinking the Water Float Valve being defective sending a premature signal to the Inlet Valve to STOP sending water? Thanks kindly in advance if anyone has any helpful info.

[@chriss2165]

thank you Scott it worked

[@Brian-vl3ng]

I have a ge washer with a top mounted pressure switch. Pushing start button activates the valves to fill for a few seconds then stop. After a couple of starts it finally works. Why??

[@QuickAndEasy5MinuteAppliance]

Hi Brian, Can you send that same question to my email at: [e-mail]

[@shellydee8660]

thank you this really just helped me a lot thank you so much

[@QuickAndEasy5MinuteAppliance]

+shelly dee Great, Thanks Shelly

[@rudedoogg67]

Hey there I'm haveing no fill issues door switch check's out fine.motor works when I checked it with cheat cord. So I filled with hose to correct water level does not spin it does nothing what can be the issue

[@QuickAndEasy5MinuteAppliance]

Hi Rudy, Think there’s something wrong with the water level sensor. I think that the machine thinks that the washer is filled with water that might be why it won’t let new water in. Could be that the clear plastic hose that goes between the tub and the water pressure sensor fell off

[@jasonearnest1900]

I've got a question I've got a Kenmore 600 series less than a year old and the hoses are clear had a tiny bit of dirt but only the cold water is slow. The hot side runs fine. I'm about to buy new hoses eliminate that, think I'd rather staying with the older washer they clean better.

[@PaulLyle-i5n]

I have a whirlpool top load washer that when you put your clothes in then turn dial to regular wash it will not fill but washer starts agitation without filling. Any help would be appreciated.

[@QuickAndEasy5MinuteAppliance]

Do you think the water valves on the wall are turned all the way on?

[@PaulLyle-i5n]

Yes got it fixed was out of time. Thanks

[@that_dude_rolo]

Thanks for the video. My washer fills, but the water stops every few mins. I have to push & pull the timer knob to get it to start again. Does it constantly until it fills to the desired level. Gonna try this & hope it may help. Unless it's something else...

[@QuickAndEasy5MinuteAppliance]

I would replace the fill valve assembly. It’s pretty easy to do and they are inexpensive

[@angeletac.2384]

Didn't work for me.I need a valve placement for the cold

[@QuickAndEasy5MinuteAppliance]

Good idea 👍

[@williamtreat5893]

Dear sir, I have a frigidaire washing machine that will not fill with hot or cold water I have replaced the water valve where the water comes in-I have replaced a $200 timmer that did not fix it so it moved on to the pressure switch- I blew into the line going down to the bottom it is clear so I blew on the valve itself and I can here a valve or reed opening and closing What can I try next-i am use a backup washer and it works fine-so there is no water pressure problem-I put a meter on the water valve inlet and it makes a beeping noise on the hot and cold solenoids-so I put the meter on the pressure switch and it beeps as well-the only thing I know to do at this point is to load the old 12ga with slugs and havesome fun-i know that if I put it out on the curb someone will get it and fix it-and I'm not going to have that done to me-can you tell me what I might try next-if I fill the washer with water it will wash and it drains the water out-o and when I start it-it starts to agitate before it starts filling with water

[@QuickAndEasy5MinuteAppliance]

Hi William, I think it’s the door lock . The controller thinks the door is open so it won’t progress to filling.

[@TheFpCassini]

Hi Scott- My Kenmore 800 won't start filling, and there's no sound either. Yesterday I filled its bucket full (with no clothes in it), then pushed a down comforter in, displacing water which possibly spilled over the top of the bucket and shorted something out? What do you think? Thanks!

[@dannyjoecappsii9104]

Kenmore 400 pulled the filter was dirty but still no water. Had a fella working with it today the timer was working but like it wasn't send power to have the water fill the washer. We checked that water was running because he touched something by the bucket it looked blue and water started coming out when he stopped it quit filling any ideas?

[@TheClownfight]

Mine is 25 years old, it's a trooper. But, it looks like it needs a valve replacement, since i have no cold

[@QuickAndEasy5MinuteAppliance]

I think you’re right👍

[@TheClownfight]

This was the issue. Thank you SO much for the video. A $22 part online I fixed in under an hour... versus what would have been probably a couple hundred bucks for a service call. Plus, wife thinks I'm a handy genius. A hundred thumbs up for this video. Love from Denver, CO

[@markcummings6856]

@@TheClownfightWow, good to hear! Great story and experience.

[@ureonme]

HELP PLS! I only have the cold water inlet hose hooked up because I dont have a hot water faucet. So the hose just hangs from the back of the washer. When it drains before the rinse cycle, water comes out of that hose thats not being used. The hose is hooked up to the washer but not to a faucet. Any fix to this?

[@burns1547]

I have one and it's still going very strong

[@QuickAndEasy5MinuteAppliance]

They are awesome washers 😊

[@mohaniesandmeyer7484]

I have a a Samsung front loader it’s only running on rinse a spin cycle, trouble shooting say obstruction what now…

[@QuickAndEasy5MinuteAppliance]

There might be something clogging the intake screen which is right where the water hoses connect to the washing machine. If that doesn’t work then you may need to replace the water inlet valve.

[@amandagrayson8888]

What comes next if the screens are clean? (Whirlpool wtw4950xw)

[@QuickAndEasy5MinuteAppliance]

Time for new fill valves

[@amandagrayson8888]

@@QuickAndEasy5MinuteAppliance Thanks. Not the answer I was hoping for, but thanks. Now, I have to figure out how to open the cabinet.

[@Neolantis]

What if you changed the fill valves. What next

[@rohitpandya5687]

THANK YOU FOR QUICK AND SIMPLE FIX. MY WHIRLPOOL WASHER STARTED GIVING HOT WATER IN TUB, THANKS

[@QuickAndEasy5MinuteAppliance]

+rohit pandya That's great Rohit, I'm so glad it worked🎉

[@huyghesvanessa6468]

HI!What to do if water keeps running but won't fill the machine?

[@QuickAndEasy5MinuteAppliance]

+huyghes vanessa Hi Vanessa, That's called siphoning . It means that the drain tube is going too far down that tube in the wall. You can fix it by pulling up the Drsin tube so it's just six inches into the tube in the wall. That should fix it. Please let me know how it goes.

[@QuickAndEasy5MinuteAppliance]

+huyghes vanessa Hi Vanessa, Just need to pull that drain tube out of the wall tube and just have it go in 6 inches. Right now it's too far in and creating a siphoning problem.

[@huyghesvanessa6468]

Just try that but still not working.water is coming out but won't fill the machine.pls help.

[@QuickAndEasy5MinuteAppliance]

+huyghes vanessa Hi Vanessa, Can you send a picture of where the drain hose goes into the wall for me to [e-mail]

[@jamilahthealchemist]

omg thank you!!!! this helped me and my husband with a washing machine we just bought from a random guy lol It works and im so happy. Just from reading this post thank you thank you

[@breakingbadheisenberg9703]

I cleaned out the water screen filter , machine is still struggling to fill up?

[@QuickAndEasy5MinuteAppliance]

Good time to replace the fill valve.

[@MrTan123456]

It works. Thank you😊

[@amoali3678]

i have full automatic Toshiba and suddenly stopped getting water from the faucet. pls help

[@rickz7657]

Thanks Mr ... ya nailed it , water flow is good now! =]

[@QuickAndEasy5MinuteAppliance]

+Rick Z Excellent, Thanks Rick

[@lukkee1]

I can hear the water going into the washing machine but it seems to automatically drain because it never fills up. Any help is greatly appreciated.

[@QuickAndEasy5MinuteAppliance]

+lukkee1 The drain tube is too far down into that big black tube that goes into the wall. Try to shorten your drain hose so it only goes into the tube in the wall by 6 inches.

[@NeoshaGardner]

This comment saved me!!

[@debitaylor7866]

I have a top loading intellowasher 2.6 and the model number is WF-T8501-TP it's a GE part of a stacking one . could you please help me. I need to save money by doing my own repairs. I'm actually looking forward to doing this I cleaned it as suggested with CLR to no avail. Everytime I searched for the part on Internet I can't find i the part number so I can order from Amazon if you could help me I would be ever so grateful. Debi Taylor

[@QuickAndEasy5MinuteAppliance]

Here you are: Part number : 5221EA2001C it’s an LG part repairclinic.com has them

[@margaretmizik7020]

I have a portable washer and water will not fill washer but when I disconnect hose from sink water explodes out of sink. Any ideas what's wrong

[@egullatt]

Thank you for sharing your knowledge... It helped save me $65 today!!!

[@QuickAndEasy5MinuteAppliance]

Excellent 😊👍

[@jamron247]

My washer ge gcwn2800d only rinses and drains and spins. Can’t get it to start will this work?

[@QuickAndEasy5MinuteAppliance]

That may do the trick

[@beardy7124]

I hope this is my issue.

[@QuickAndEasy5MinuteAppliance]

Please let me know how it goes😊

[@shortieyee3000]

thank you!!!!

[@QuickAndEasy5MinuteAppliance]

You're most welcome

[@rustyshackleford1785]

Same problem as another comment,water running into washer not staying filled,drain tube siphoning issue?

[@QuickAndEasy5MinuteAppliance]

Yep, Might need to pull that tube further out of the drain in the wall so it won’t siphon

[@rustyshackleford1785]

@@QuickAndEasy5MinuteAppliance tried it earlier,thanks for input and response!

[@carolynstarr7046]

Thank you ,,,you are awesome !!!!

[@QuickAndEasy5MinuteAppliance]

Thanks so much. Glad I could help.

[@Kyashe_Inc]

hey I have an issue with my top loader not filling when line is connected properly in the carribean we don't use hot and cold just the cold which really is warm 🤣 however a few days ago it stopped filling I cleaned the filter mesh and it still wouldn't fill I switched the line from cold to hot now it fills but wont fill to rinse. any ideas as to what I could try?

[@QuickAndEasy5MinuteAppliance]

Time for a new valve

[@alicebratton6120]

Mine is doing the same thing, what did you do to fix your

[@yasiralsaadi5091]

What if the water does not stop when the washing machine is full

[@QuickAndEasy5MinuteAppliance]

The small clear rubber tube located at the back right side of the tub fell off during a large load and now the washer cat since how much water is filling so it will keep filling nonstop. Try pulling the machine away from the wall by 2 feet and leave it back against the wall at 45° and support it and then look up from underneath and push the two back on to the tub connection.

[@barbarapurcell7296]

Hi, my machine won't draw water. It's one that can only draw water when the lid is down. I was feeling around in there today and noticed that there is a switch of some kind under the lid on the back left side. When the lid goes down theres a little lever that slips up into a spot and hits something that makes the water come on. What is this part called and how can I fix it?

[@QuickAndEasy5MinuteAppliance]

Nice job, You’re right, you need to replace the lid switch.

[@barbarapurcell7296]

Do you have a video on that

[@johnmcdonald9569]

Is it possible to actually replace the coil inside a wonky solenoid? I have taken mine out of Whirlpool Model 6ALSQ8000MW and have tested that one solenoid is not working. Could it be stuck and could I dissemble the set up and get inside?

[@QuickAndEasy5MinuteAppliance]

+John McDonald You can just switch the coil, But it may have failed due to dirt stuck inside.

[@khathutshelomavhungu4789]

Useful Tips

[@teekay2014]

Most helpful

[@darkthought7860]

What about when the water comes through but it doesn't fill and doesn't wash. My washer is stuck on the wash cycle but doesn't do anything. After it pours with water it does that for a while then stops.

[@QuickAndEasy5MinuteAppliance]

Can you send that same question to my email at: [e-mail]

[@bmwspringwater]

Samsung vrt top loading washer not filling

[@bmwspringwater]

Samsung vrt top loading washer not feeling

[@QuickAndEasy5MinuteAppliance]

Probably needs a new fill valve👍

[@crystalmartinez1190]

The water comes out in mine but does not fill the drum....it just drains right back out. In fact the water was running for 3 hours before I noticed...what is wrong with my washer?

[@QuickAndEasy5MinuteAppliance]

No problem Crystal, Just pull the drain tube up out of the big drain tube in the wall behind the washer. It should only go in by about 8 inches 👍

[@BillyTucker-hi4sd]

Take screens out of washer water inlets take screens out of washer hoses put screens in left or right hand throw screens in trash can no more water problems 🤔

[@adlinemcgee397]

What if there no sound

[@QuickAndEasy5MinuteAppliance]

Great Question Adline 👍 Click Here to Get Live Expert Help From Me For Just $5.00: kzbin.info/door/GpInAejvpfVVE4FHB_L-Dgjoin

[@rowenasalahuddin4288]

My washer fills water at the start but gradually water slows down till it eventually stops filling. I"ve cleaned the filter but the problem goes the same.

[@QuickAndEasy5MinuteAppliance]

Just need a new fill valve .