SmittyBilt 2780 Review and Mod - (ARB vs. Smittybilt 2780 after DIY pressure Switch Upgrade)

[@mjenner89]

I would really appreciate it if you would make a How To video or post the instructions!

[@WastingTimeInTheWoods]

Hey, Matt! My next video is a two-parter that will include a wiring diagram for the pressure switch mod. The series will cover how to modify the Smittybilt further to side-mount it under the hood and how to build a manifold that bolts on right in front of the battery. I hope to have both up in a couple weeks. Thanks for watching, asking and staying tuned to the channel!

[@WastingTimeInTheWoods]

Check out the latest video for a wiring diagram and more detailed instructions - kzbin.info/www/bejne/bpKQpqCogr5ka5o

[@TRDCelica]

These videos are better produced than channels with 500k+ subscribers. Incredible

[@WastingTimeInTheWoods]

That’s the coolest comment I’ve got so far. Thank you!

[@BillReals]

@@WastingTimeInTheWoods Agreed, your production value is off the charts.

[@lrdoffroad876]

I would love a tutorial on this!!! This is awesome!!! Great job!

[@WastingTimeInTheWoods]

That's one vote.

[@WastingTimeInTheWoods]

Check out this video for much more detailed instructions: kzbin.info/www/bejne/bpKQpqCogr5ka5o

[@abuskirk08]

Really enjoy your channel and humor. Thanks for sharing your "Dad life" hobbies and experiences!!

[@WastingTimeInTheWoods]

Let me know if you have any topic ideas. Ive got a short list but would love to get ideas from you guys. Thanks!

[@evankiefer2311]

Fun video, one thing to note is airing down is about increasing tire contact with the ground, which was correct, but its more about elongating the footprint rather than making it wider.

[@WastingTimeInTheWoods]

I hadn't heard that but that makes a lot more sense now that I think about it. Like I said, I'm pretty new to all this truck stuff. Thanks for pointing that out and stay tuned for more entertaining if not always accurate content : )

[@WastingTimeInTheWoods]

Hey, Evan! I corrected my error and gave you a funny shoutout in the latest video : ) kzbin.info/www/bejne/bpKQpqCogr5ka5o Let me know if I got it right.

[@TFrax]

Holy F.....this was a great video. both educational and entertaining. How does this guy not have more subs?! Well, at least you got one more sub!

[@WastingTimeInTheWoods]

Thanks! The best way to help is to share it with your trail buddies on FB. More subs=more videos : )

[@jeremydevillier5622]

You're a funny guy. I was informed and entertained. Thanks

[@dantheman11995]

Love your content and production value, especially the various camping reviews. Good to see another local from Phoenix out here too!

[@WastingTimeInTheWoods]

Thanks! More camping stuff coming out soon. I’ve got Front Runner water jerry cans and The North Face warranty review videos coming up soon. That one’s more funny than it sounds : )

[@Matthew-tm2oq]

Finally!!! Thank you Sir and always enjoy humor thrown into videos like this. I'll be ordering the parts now. I've been looking into doing this for a year now. Keep up the awesome vids. Subscribing.

[@WastingTimeInTheWoods]

Awesome! If you use the links in my description Amazon gives me a couple quarters to make more videos : )

[@Charleycaptures]

“I don’t know anything about electricity” - Truer words have never been spoken.

[@grn9209]

Love your point of view and sarcasm!👏🏼👊🏼. Send me a message if you ever want to off road together ( also have a GX460)👊🏼

[@TeslaOverland]

Wow. Great job! Can’t wait for the future videos! I def want to install one of these in my gx!

[@WastingTimeInTheWoods]

Thanks! I got it mounted on the accessory plate this weekend which was a lot harder than I thought it would be. More on that soon. Love you're videos!

[@Strickland325]

Very good video my friend. You earned a sub here. Phenomenal video quality.

[@stephenrogers9216]

Definitely going to need a how to video on modifying that compressor!

[@WastingTimeInTheWoods]

Thats two votes.

[@WastingTimeInTheWoods]

Check out this video for much more detailed instructions: kzbin.info/www/bejne/bpKQpqCogr5ka5o

[@reidmartin3479]

Ahh I live in Canada and can’t find this adapter anywhere

[@OvenBak3d360]

If jp Sears made a overland channel this would be it

[@WastingTimeInTheWoods]

Im not sure who that is so I’ll just assume he’s handsome and sophisticated.

[@OvenBak3d360]

@@WastingTimeInTheWoods has a very similar humor style id look him up

[@WastingTimeInTheWoods]

Will do. Thanks!

[@WastingTimeInTheWoods]

My assumptions about handsomeness and sophistication may have been a bit unfounded. He is funny though : )

[@TimsBitsnPieces]

Great stuff .. watching from Melbourne Australia.. love the sarcasm in the video and the production is top-notch.. I would love to see how you modified it, mind you, my compressor is not an ARB it's an XTM not sure if you get this brand over there ... keep up the great work.

[@WastingTimeInTheWoods]

Haven’t seen XTM over here but there are a thousand brands that all look to be using a few manufacturers.

[@jmoore2781]

Love you videos, building my 2011 GX. 🤞

[@WastingTimeInTheWoods]

Thank you!! Let us know what you do to it.

[@Alexglast]

A how to video would be awesome!!

[@Alexglast]

Found it😅

[@WastingTimeInTheWoods]

A viewer confirmed that you can do this install with the 2781 (larger version) as well. Good luck!

[@thomasferrer3210]

Would you please show a video on how to connect to the wiring.

[@WastingTimeInTheWoods]

Check out this video for much more detailed instructions: kzbin.info/www/bejne/bpKQpqCogr5ka5o

[@thomasferrer3210]

@@WastingTimeInTheWoods just checked it out. Thanks.

[@rianhart4143]

2780 still has a Thermal problem. How did you navigate that? my motor burned out. is it fixable or a landfill?

[@WastingTimeInTheWoods]

Sorry to hear that! My thermal cut off switch has kicked in several times. Every time I cursed. Guess, I should have been thankful :-) get a 2781 to replace it. Good luck!

[@4Rracing]

@@WastingTimeInTheWoods hi, I'm not excited about purchasing from smitty again with the their reply to me when contacted them about my 14 month new dead compressor.

[@FerdiGaleon]

Subscribed for the - wasting time in the woods air up system. Vid

[@WastingTimeInTheWoods]

Next two videos should be the onboard air and the air manifold install. Just need time to film them.

[@WastingTimeInTheWoods]

kzbin.info/www/bejne/bpKQpqCogr5ka5o

[@BigmudderTater]

I am purchasing this air compressor today because of your mods! Can you make a video on how you modified it? I like to mod stuff and want to know what you did. Great video!! 👍👍

[@WastingTimeInTheWoods]

Awesome! If you use my amazon links they send me beer money to make more videos 🍺 : ). I'm editing the next video in the Smittybilt series today. In that I give more detail on the wiring and a diagram so hopefully that helps. I'll also show you how I've rotate the brackets around and installed it with a manifold under the hood. Keep an eye out this weekend. Hopefully tomorrow.

[@BigmudderTater]

@@WastingTimeInTheWoods I bought the compressor already:(. I will definitely buy all the parts through your Amazon once you post the video with parts list. 😁

[@WastingTimeInTheWoods]

@@BigmudderTater No worries! I'm all about the best deal. Stay tuned.

[@WastingTimeInTheWoods]

New video with complete instructions dropped yesterday. Enjoy! - kzbin.info/www/bejne/bpKQpqCogr5ka5o

[@OSullivanLawFirm]

Love your show!

[@pontus8589]

Hi, Nice modification. Do you think it will hold up well in the engine compartment? Was thinking about making the same modification and mount in engine bay but im a little worried it wont tolerate an engine wash? How water resistant do you think it is? Br Pontus

[@WastingTimeInTheWoods]

I would probably get an ARB if I were planing on doing water crossings regularly.. It did overheat on me one day after 2.5 tires but I was trying to get them to 45psi. It fired right back up after a 20 minute cool down though. I think for anybody doing casual overlanding, this is a good choice. Hard core guys running 34" tires, probably better get an ARB double.

[@pontus8589]

@@WastingTimeInTheWoods Thank you for your answer. Oh no i'm not planning on doing water crossings, just a 1 year regular engine "wash" to keep it clean and nice. I'm only running 33" and 35psi on road so i think this one should be fine. Br Pontus

[@WastingTimeInTheWoods]

@@pontus8589 Then you should be fine. I've washed my engine once with it in. I would silicone the hole you drill in the plastic cap if you do the mod. On another note, I use tire foam on my engine and it does a great job.

[@pontus8589]

Sweet thank for the tip!

[@KGX470]

Good stuff

[@WilliamVG]

Can you give us viewers a long term review on the Smittybilt 2780? Thinking about a cheap reliable 12V air compressor without the ARB price:)

[@WastingTimeInTheWoods]

Maybe, but I can tell you I made this video and did the work almost 3 years ago now and I aired up twice this weekend with no issues : ) (and about a 50 times before that). Go with the 2781 though, same process and fits. Mine overheats on the 4th tire if I'm above about 8500' or in the desert in the summer so I have to give it a break before the 4th tire in those scenarios or end up having to wait for it's thermal switch to reset (~20 minutes). Should not have that issue with the larger 2781. Good luck!

[@oriolbarrobes9392]

I bought the bigger brother today, can you do a video on how to put a standard fitting hose on it? I see you did that already and I would love that on mine, as a matter of fact I would volunteer mine to do it and film it

[@WastingTimeInTheWoods]

Same process! Just follow the wiring diagram and make the mods the same as you would the 2780. I got my inspiration from guys doing it on the 2781.

[@yiayang3403]

I want a how to video! Btw, I already have a similar air compressor for Harbor Freight. Do you think this will work on it too?

[@WastingTimeInTheWoods]

Probably. I don’t think the Smitty is purpose built. It’s probably a commodity compressor from another manufacturer.

[@ken-w]

Is the small black wire going into the motor a thermal overload?

[@WastingTimeInTheWoods]

I believe thats powering the relay. The thermal switch is inside the motor somewhere.

[@WastingTimeInTheWoods]

Not sure though so do your own research : |

[@ken-w]

@@WastingTimeInTheWoods it is a thermal switch

[@BillReals]

Can you post a parts list for that mod?

[@WastingTimeInTheWoods]

Sure. I can probably make that happen today.

[@WastingTimeInTheWoods]

Done. Be sure to subscribe if you plan on doing this. I'm be installing this under the hood and adding a 4 tire air up system of my own design so this will be the first in a series on my custom air system. Thanks!

[@WastingTimeInTheWoods]

Check out this video for much more detailed instructions on how installed the Smitty under my hood: kzbin.info/www/bejne/bpKQpqCogr5ka5o

[@artardFTW]

the how- to video would be great. I'm looking to purchase the larger version with almost the exact same intentions to do what you did here with the pressure switch and normal fittings

[@WastingTimeInTheWoods]

I expanded on the instructions and made a wiring diagram which you can find in this video - Ultimate Onboard Air System (DIY) - GX 460 SmittyBilt 2780 Onboard Air Install

[@artardFTW]

@@WastingTimeInTheWoods yes! I did see that video I completely forgot to come back and update my comment lol thank you!

[@WastingTimeInTheWoods]

Good luck! Theres a pdf in the links to that video and amazon links for the compressors.

[@abuskirk08]

Just an idea to throw out there.... How about a video of how YOU load and stock your vehicle for a camping trip.... and enough room to fit 4 or 5 people for the ride??

[@WastingTimeInTheWoods]

That's a great idea and I already have the footage. My oldest daughter filmed me during an entire load out. We roll with the whole family (Jill and I plus 14yo, 5yo and 65lb dog). It's supper tight but works. I'll have a think about how to make that funny and add it to the list. Keep them coming!

[@knaudi86]

Fellow GX owner here... what was the plate you used to mount this under the hood?

[@WastingTimeInTheWoods]

I used a c4 fab 5th gen 4 runner accessory mounting plate because I'm a cheap bastard and didn't think to measure the plate first. It's only $25 currently but I had to use a bunch of washers to space it off the fender because it's really too small to fit the Smitty 2780. It would work fine for a single ARB which is more compact. If I were to do it again (and I probably will because I'm an idiot), I'd probably start with this - www.powertrays.com/collections/5th-gen-4runner/products/1-blank-powertray. That looks like it will fit the Smitty much easier and leave room for accessories. I've got mine installed under the hood now but it was a bear. Stay tuned for install videos next.

[@WastingTimeInTheWoods]

Check out this video for much more detailed instructions on how I installed the Smitty: kzbin.info/www/bejne/bpKQpqCogr5ka5o

[@jeepncj7]

😂😂😂 that's my time. That rang so true hahaha.

[@Dusther210]

Yes please I need the tutorial for this

[@WastingTimeInTheWoods]

Coming Soon.

[@Dusther210]

@@WastingTimeInTheWoods thanks!

[@WastingTimeInTheWoods]

Check out this video for much more detailed instructions on modding and installing the Smitty: kzbin.info/www/bejne/bpKQpqCogr5ka5o

[@dafrasier1]

Not sidewalls ? but Tread, more tread on ground. Longer tread.

[@Agent.K.]

Arb single has 50% duty cycle

[@alfs8]

What Method wheels did u run?

[@WastingTimeInTheWoods]

701’s 17x8.5 0 offset.

[@scottChapman25]

I wouldn't mind a tutorial

[@WastingTimeInTheWoods]

kzbin.info/www/bejne/bpKQpqCogr5ka5o

[@thegreenroom247]

This is detrimental to the compressor. Watch this video and you'll understand. I wish I watched it before I destroyed my other compressor. You need to have a flow through air shuck. If not, it's just pushing against pressure and will kill the compressor. Please check out this other video before You do this. kzbin.info/www/bejne/sH_EqoJ3ppqbfLc