Tap to unmute

Watch THIS Before You Change An Oxygen Sensor! ǀ How to Replace an Oxygen Sensor ('10 Toyota Tacoma)

  Рет қаралды 511,958

Frank Christopher

Frank Christopher

Күн бұрын

Пікірлер: 546
@franklong9265
@franklong9265 3 жыл бұрын
Dude I've been a Master Tech for close to 40 years and I ran across your video and had to watch this for some reason. You did an absolutely amazing job of describing the sensor system. Bank 1 is always where your number one spark plug is. I have tried many many times to explain that just because a code comes up for a sensor doesn't always mean that the sensor is bad. always check your connection as many times all I've had to do is unplug the sensor then plug it back in clear the codes and see if it comes back. anyway, keep up the good work and keep doing it yourself
@maritimezhang
@maritimezhang 4 жыл бұрын
you know what's great about this video? He tells you what he didn't do and what you should do. That's a honest man right there!!!!!
@gambinoanthony1618
@gambinoanthony1618 Жыл бұрын
Give this guy some credit here. He knows more about O2 sensors then he even realizes. Way to go!
@redlord4
@redlord4 4 жыл бұрын
I love this guy. He cares about helping the next dude
@ReadyUpGo
@ReadyUpGo 2 жыл бұрын
I have perhaps two days more experience than you with auto repair and had the same problem come up on my Honda CRV recently. I managed the replacement after watching hours and hours of video in preparation. Now I find yours that is superior to 90% of what I watched. Just wanted you to know and be encouraged to carry on making instructional videos. The more I study on KZbin, the more I’m convinced that being able to make a really good video is some kind of gift, and quite rare.
@FrankChristopherOutdoors
@FrankChristopherOutdoors 2 жыл бұрын
Thank you. Your comment means a lot to me and I greatly appreciate it
@MyPhone-mr6gl
@MyPhone-mr6gl 7 ай бұрын
Thanks
@ethanromero3442
@ethanromero3442 3 жыл бұрын
Finally someone who is honest! I'm about to change all 4 of mine. Has 145k and never changed them. I appreciate the advice and honesty.
@jess8075
@jess8075 2 жыл бұрын
For someone who is not a mechanic, you did excellently. Thank you
@jackajolo5372
@jackajolo5372 Ай бұрын
Just scrolling & popped up 02 Sensor. Then yours popped up, so as i listened to your Honesty, got to admit ! You made it so clear, that it gave me confident that even me a DIY will give it a try. @ the moment, no 02 Sensor problem. 🙂 Aloha from Hawai'i Mahalo 🤙
@FrankChristopherOutdoors
@FrankChristopherOutdoors Ай бұрын
@@jackajolo5372 thanks for the comment !! You can do it
@joehyundaitech7961
@joehyundaitech7961 3 жыл бұрын
I do not know why 56 people gave this video a thumbs down. I have watched many youtube car repair videos and this is one of the best ones. BTW im a tech at a hyundai dealer and yes always use the factory oem 02 sensors grate job on this video Frank and thank you
@FrankChristopherOutdoors
@FrankChristopherOutdoors 3 жыл бұрын
Thank you joe means a lot coming from a mechanic like yourself
@leyre4439
@leyre4439 2 жыл бұрын
Trolls...
@simonac688.
@simonac688. Жыл бұрын
frustrated mecanics 😂
@arnolsimanungkalit1184
@arnolsimanungkalit1184 3 жыл бұрын
From Indonesia... man... your kindness is more than typical Indonesian...
@gman000
@gman000 Жыл бұрын
10 out of 10 very precise. I'm not a mechanic myself but I do fix my own problems. Thanks Guy all the way from Cape Town South Africa
@FrankChristopherOutdoors
@FrankChristopherOutdoors Жыл бұрын
thanks for watching!
@angelotillas9782
@angelotillas9782 3 жыл бұрын
Great video, pal, and I do mean GREAT. You covered everything necessary for a sensor change and then some. Disregard those 'thumbs down' complainers, they are lame. You were as good as ANYONE I've ever seen.
@tubetime39
@tubetime39 2 жыл бұрын
!!!!!! Yep I Agree !!!!! Good comment. I'veseen a lot of YT vids Very few ( there are some ) are this well done. You here, "this thing here. Put that thing there." And you can't see anything on the vid bc of bad camera work. And some vids like that are done by mechanics.
@FrankChristopherOutdoors
@FrankChristopherOutdoors Жыл бұрын
thanks I really appreciate the kind words
@ManJO601
@ManJO601 3 жыл бұрын
Rock Auto is my best friend & I as a retired Mechanic gives this Frank 100% Passing mark!! Like he really said DO YOUR HOMEWORK!! You got my Thumbs up Frank!! ;👍👍👍👍👍
@stevenjackson7067
@stevenjackson7067 3 жыл бұрын
Honest about what he did and didn't do. Didn't try to make it sound like he knew it all. Clear voice and kept it simple
@dannyn1698
@dannyn1698 3 жыл бұрын
Check engine light came one. Ran the code. Took truck in for an estimate, it might be this, it might be that. F**k that. Watched your video and grew some balls to do the work myself. It was an O2 sensor. Thank you for the tips. It worked. Now I can buy more gun parts with the money I saved. You da man!
@FrankChristopherOutdoors
@FrankChristopherOutdoors 3 жыл бұрын
Right on man. Buy that stuff while you still can
@ToFightTheGoodFight
@ToFightTheGoodFight 4 ай бұрын
Gunsmith approval 😆
@devbryce
@devbryce 5 ай бұрын
Had the same check engine code and found my way here. I have the 4cyl version of your truck and it's exactly where you said it was. Got it replaced in about 10 minutes. Thanks.
@FrankChristopherOutdoors
@FrankChristopherOutdoors 5 ай бұрын
@@devbryce happy to help! Thanks for the comment
@lightbearer.94
@lightbearer.94 2 жыл бұрын
thx my guy! you just saved me a few hundred bucks for a mechanic to replace mine! i was expecting it to be a huge repair job but im definitely going to do it myself i have a 3rd Gen 4Runner (99 SR5 4x4) im glad i found your video & im thankful for guys like you always looking out & passing on information to people like myself who know nothing about cars or anything so big thx again brother!! this is my first car so i’m definitely gonna try to replace & repair everything myself that needs to be done. keep doing what you’re doing man good luck & be safe!
@danielfiore5528
@danielfiore5528 2 жыл бұрын
I've watched this 3x and crack up laughing more and more each time. The determination and seriousness of this man.
@briancodey846
@briancodey846 4 жыл бұрын
Great video Frank. Very straightforward. The left bank/right bank explanation was helpful. Just finished doing the two upstream sensors on my 2011 Tacoma V-6 4wd. I bought my Denso sensors from Amazon. Same price as Rock Auto but free and quicker shipping. I didn’t know that the chain auto parts stores might do price matching until you mentioned the deal you got from O’Reilly. The hardest and most painful part of the job is reaching and disconnecting the wire connectors.
@FrankChristopherOutdoors
@FrankChristopherOutdoors 4 жыл бұрын
You pretty much just paraphrased the entire video. Thanks for the compliment and I agree that is definitely the hardest part. Thanks for watching Brian
@jbailey3983
@jbailey3983 9 ай бұрын
Thanks Frank, I found this video interesting, easy to follow and helpful. I found it helpful that you showed the two sensors on cam so now I know what to look for. Just wish you would have explained where on the truck the plug in connector went to.
@FrankChristopherOutdoors
@FrankChristopherOutdoors 9 ай бұрын
I believe sensor end of the O2 sensor screws into the exhaust and the wires should plug into a connector which will lead back to the ECM (engine control module or the 'brain'). Hope this helps
@dean3434
@dean3434 2 ай бұрын
Clear and to the point. Thanks. I've been thinking about 02sensors and the MAF sensor on my 2007 Dodge Magnum, although with only 64k miles on the Magnum I'm going to give them a look. Thanks again. Dean Seattle
@caucasianafrican1435
@caucasianafrican1435 3 жыл бұрын
Dude, I like your intro. "I like saving money"... Makes sense to me.
@belovedevans
@belovedevans 2 жыл бұрын
Thanks Frank. I have a 2013 Toyota Venza (V6 3.5 L engine) and I suspect it is an O2 sensor problem. Don't want to go to the dealership. Your video has helped me a lot and I am going out to buy a scan tool and trouble shoot the problem. Great video and very honest. Much appreciated.
@FrankChristopherOutdoors
@FrankChristopherOutdoors 2 жыл бұрын
Glad I could help good luck with your problem
@andreas_2525
@andreas_2525 7 ай бұрын
Solid video, great explanation. Open, honest, no ego ... Just straight forward advice from his experience and research.
@bobbyplatt7654
@bobbyplatt7654 2 жыл бұрын
Awesome to see someone who really wants to help others, God bless you man for a great video..
@DrayaLafleur
@DrayaLafleur 4 жыл бұрын
Thank you very much! As a single female this stuff can be very intimidating and unfortunately unknowledgeable people get taken advantage of so thank you thank you helped me more than you know!
@FrankChristopherOutdoors
@FrankChristopherOutdoors 4 жыл бұрын
I’m really glad I could help. Best of luck
@christopherrosas2738
@christopherrosas2738 4 жыл бұрын
This is why I like working on people's vehicles and teaching them as I work on the vehicle, I like passing knowledge on so people don't get taken advantage of......
@TheGiantsWillWake
@TheGiantsWillWake Жыл бұрын
I've done most of the work on my own cars since I started driving cars, which is closing on 40 years. I currently drive a 2013 Kia Soul, which has direct fuel injection, and I discovered my main problem on the fuel side. Any car which uses direct fuel injection is going to have a [version of a] device mounted somewhere on the valve cover, which is called a High Pressure Fuel Pump. And this is my helpful story: Leaving the house, my car car starts choking and won't accelerate at all. I can start it, but it only stays running at idle, so I limp it back to the house. I was getting codes for running rich, and for a faulty catalytic converter. Check O2 sensors (mine is 4-cyl, so only two OXY. sensors), they're old and bad. Replaced the O2 sensors. Checked for exhaust leaks, found two small ones and patched them. Car runs again, but still showing the same codes, and still getting the smell of unburnt gas, a.k.a. running rich = too much fuel. No vacuum leaks found. Start investigating the fuel system. I disconnected both bat. terminals, then disconnected the pump. Upon removal, I quickly discovered that my High Press. Fuel Pump was leaking down into the valve cover. There is a heavy spring on the bottom of the pump, which is actuated by the camshaft. Between the pump spring and the camshaft is a part called the 'follower', which has a roller bearing on the bottom, and which is what actually pushes against the spring mechanism to drive / actuate the pump. (This bearing 'follower' is going to be replaced, also. If it fails and sheds debris inside the valve cover, it could easily cause major mechanical damage to the valves and the motor.) Also, when the bearing gets worn and starts to get some play in it, it makes a rattling noise that sounds like valve lifters knocking. Because the fuel pump is leaking from the bottom, and into the valve cover, there are fuel vapors from unburnt fuel building up inside the valve cover. The fuel is also mixing with my oil and thinning it out, wrecking the viscosity of the oil. If my car hadn't chocked out from failed sensors, I might not have discovered my fuel pump issue in time to avert larger problems. If you have a vehicle with direct fuel injection, and you're smelling gas, and the car is throwing p-codes that it's running rich, or the cat. converter has failed, pull the high pressure fuel pump and check if it's leaking down along the spring into valve cover body. If it is, replace it asap. I would strongly recommend installing a new follower bearing, as well. Point is, the codes don't always tell the whole story, or always help to determine the best way to begin your trobleshooting / diagnosis, because the codes are not always giving the full picture. Granted, the scanner I used I borrowed from my brother, and I wasn't overly impressed with its available features. Start by checking those things which only require a few tools to remove and diagnose, and the cost of a little time and elbow grease. Like the working condition of your high pressure fuel pump, for example. My codes said exhaust leak, faulty fuel pressure sensor, bad cat., and none of those were the principle issue. A multi-meter is an essential tool to test and troubleshoot the performance of many components on your car.
@eyesalooking
@eyesalooking 3 жыл бұрын
You are a natural. Great camera work, great presentation and I learned a lot. I have an oxygen sensor to replace and an air charge temperature sensor if I can find it.
@mikeodonnell3492
@mikeodonnell3492 3 жыл бұрын
Good video! You have a nice, calm delivery. You got lucky with easy access, some are horrible to replace.
@FrankChristopherOutdoors
@FrankChristopherOutdoors Жыл бұрын
thank you
@Retired70
@Retired70 2 жыл бұрын
Thanks dude, you remind me of myself 40yrs ago..good tip for us do it yourselfers.
@jmartin9785
@jmartin9785 2 жыл бұрын
You say very humbly that you aren't a mechanic, well l say that you are, you show a deep understanding of, and solution for, what mechanics have to resolve and deal with every day. Thanks for your common sense solution to a common problem for people out there that don't know. From this old mechanic of many years. 🌈
@FrankChristopherOutdoors
@FrankChristopherOutdoors Жыл бұрын
thank you
@JOEZEP54
@JOEZEP54 Жыл бұрын
This video popped up "recommended". So I watched full view. Helpful content. As a non mechanic DIYer (been a DIYer before DIYer was a thing LOL) I often have to do some research. Unfortunately been given wrong advise way too many times. The anti-seize will save you some future headaches. Just a DIY tip, I use 50% acetone/ 50% transmission fluid to help free rusted sensors, bolts etc. Found it to be as effective as any rust bustor that I bought, always handy & less expensive. Added another 👍 to the 5.7k you already received. Nice job. Stay well, Joe Z
@FrankChristopherOutdoors
@FrankChristopherOutdoors Жыл бұрын
Thanks for the tips joe. Thanks for watching 👍
@JOEZEP54
@JOEZEP54 Жыл бұрын
@@FrankChristopherOutdoors You're welcome
@jabobobo3727
@jabobobo3727 2 жыл бұрын
So glad I found this video for an explanation of the sensors alone! I got error code p0051 and that gave me an issue with Bank 2 Sensor 1. Now I know that it’s driver side and upstream from the cat! I gotta order the part and I’ll update when I get it all together! Thanks again!
@michaelallred6441
@michaelallred6441 2 жыл бұрын
Thank you, very helpful video. Just a couple tips for future videos if you care for them. I’m not sure if that was insects or something in the background that was screeching so loud but it made it difficult to concentrate and not get irritated with it. And on a much smaller note, it seemed very apparent you weren’t looking into the camera but off to the side. Not that it matters, I just noticed and figured I would mention in case you cared. Thank you again for the video.
@70xlt
@70xlt 3 жыл бұрын
Great common mans opinion and trying to help people... Great to see. Thank you
@karishlutz9437
@karishlutz9437 Жыл бұрын
Can you please make a video of 06 nissan murano and where is the fuel pressure sensor is located. You the best teacher I have ever seen. Thank you.
@FrankChristopherOutdoors
@FrankChristopherOutdoors Жыл бұрын
Thanks for the comment but I'm sorry I dont have a murano. I'm sure someone else shows how to do it online somewhere though
@CalkoLouie
@CalkoLouie Жыл бұрын
Frant you explain the whole in perfect order.
@carlwray4627
@carlwray4627 3 жыл бұрын
Thanks bro,you are real ,you sensitized alot of us ,I'm planning on getting one of those trucks in the future, I try to do some stuff myself to,A tonne of respect to you bro
@johnnyaguinaga8661
@johnnyaguinaga8661 6 ай бұрын
Might want to mention on buying a new gasket I’m still using the same one for 20 plus years , it’s kinda worn but still does the job
@sebneufeld7948
@sebneufeld7948 10 ай бұрын
This is awesome! Thanks Frank, I am only left with one doubt and I have been doing my homework and still can't be 100% sure of the answer. I understand there is the upstream and downstream 02 sensors, however, is the right hand side same as left hand side? Just to be clear, I know the downstream is different from the upstream, simply wondering if I just buy two of each to swap all fours
@MoSportsUSA
@MoSportsUSA 3 жыл бұрын
Great explanations and tips for a non-mechanic novice. I'd also suggest some dielectric grease in the sensor connector to forestall any future issues with moisture, rain, mud, etc. If your OBDII scan tool will not clear the code nor cancel the dash Check Engine light, you can also disconnect the battery for a few seconds. Be advised first, however, you have the radio code which may be necessary to reactivate the radio after losing power. Also first write down whatever radio stations are in memory since those will also be lost.
@brucetidwell7715
@brucetidwell7715 Жыл бұрын
Thanks, Frank! Maybe I shouldn't say this until I actually replace it, but this was a big help.
@FrankChristopherOutdoors
@FrankChristopherOutdoors Жыл бұрын
Hope it all goes great for ya thanks bruce
@tubnquagchannel1338
@tubnquagchannel1338 Жыл бұрын
Good job ! Your video is very helpful . I have a same truck you do. I will keep your video on hand , if my truck has that issue.
@rkjoat
@rkjoat Жыл бұрын
It's nice to see someone who is articulate enough to explain repair in a simple English manor for all to understand. Unfortunately, my 2006 Tacomas Bank 1 isn't as easy to get to. They re-engineered the location from the inner side of the header to the top for ease of access.
@FrankChristopherOutdoors
@FrankChristopherOutdoors Жыл бұрын
thank you. good luck
@jamtin3977
@jamtin3977 2 жыл бұрын
Thanks for explaining bank 1/2 & oxy sensor up/down stream, appreciated. 👌🖐🇦🇺
@eddiepires3998
@eddiepires3998 3 жыл бұрын
Good on you for having the courage to do the job yourself. I bet the feeling of self sufficiency is very satisfying . Thanks for passing on the information.
@glazier4766
@glazier4766 3 жыл бұрын
Thanks Frank, that was alot of help. I appreciate you taking the time to show us non mechanics doit yourselfers. I got jeep liberty saying bank 1 sensor 2. So I'm assuming that's driver side downstream. Wish me luck and thanks again. Great job
@carlosvidal423
@carlosvidal423 Жыл бұрын
Hey Frank, I do plenty of my own work. Great video, also explanation was awesome. Great video for newbies.
@walterabarca5211
@walterabarca5211 2 жыл бұрын
This is the best explanation I have being searching something like this thanks for helping out
@nouseforaname808
@nouseforaname808 4 жыл бұрын
Spot on on the advice to stick whats on the vehicle! Stick with OEM. Price may be higher but "buy one-cry once".
@robertcampos7710
@robertcampos7710 4 жыл бұрын
Great job explaining from start to finish. Much appreciated
@lespopulorum1512
@lespopulorum1512 Жыл бұрын
Good video, let me add something for the guy that either doesn't want to buy that tool or can't afford to buy it. Cut the wires on the bad one and use a 7/8 box end wrench or whatever size yours is. You get better leverage. Good job on the video. Shade tree mechanic here.
@nam5353
@nam5353 4 жыл бұрын
Thank you Frank! I like you who do not know anything about O2 stuff. Paid a lot of money for new ones and to mechanic for replace the old ones, "Check Engine" light still back on after few days. I decided educated myself and change them by myself.
@jimwhalen5578
@jimwhalen5578 Жыл бұрын
Thanks for sharing the video. I have the same truck. 2011 Tacoma V6. I just got the P0031 code. Sharing this video is a great help
@elitecorp1316
@elitecorp1316 3 жыл бұрын
Thanks my guy. Am thinking of doing this myself,i hop it will be as easy as you have showed here. Pls keep such video coming,they are very educative.
@johnnylee7096
@johnnylee7096 2 жыл бұрын
Hay, Thank you for your video, I already changed 2 sensors on my car. 2 more sensors to replace. Learn more in your video. I bought the parts from dealer, almost $700. I should watch your video before Buy the parts.
@hansgruber7680
@hansgruber7680 2 жыл бұрын
Good job on the video! I refuse to use rock auto anymore! Horrible shipping debacle in the past and no easy way to get it resolved.
@barrywl01
@barrywl01 3 жыл бұрын
Excellent video Frank. I appreciate the careful explainations you give. So thank you for doing this for us.
@FrankChristopherOutdoors
@FrankChristopherOutdoors 3 жыл бұрын
My pleasure - Glad I could help.
@josephyoung3709
@josephyoung3709 Жыл бұрын
Outstanding job. I am going to try this on my Jeep.
@FrankChristopherOutdoors
@FrankChristopherOutdoors Жыл бұрын
Thanks good luck. If you think I can help just message me on here
@shewangzawetesema4657
@shewangzawetesema4657 3 жыл бұрын
God bless u bro..u honest person u save as from all robery mecanic
@jeffreymeyers7514
@jeffreymeyers7514 5 жыл бұрын
Thank you. I'm buying a Taco with a bad sensor. This helps get me started. Much appreciated.
@FrankChristopherOutdoors
@FrankChristopherOutdoors 5 жыл бұрын
I’m glad I could help you. Anymore questions feel free to ask I will help if I can. Thanks for watching
@rockomapaw13
@rockomapaw13 Ай бұрын
an outstanding clear explanation video. thank you for sharing.
@FrankChristopherOutdoors
@FrankChristopherOutdoors Ай бұрын
@@rockomapaw13 thank you
@thecollector3525
@thecollector3525 2 жыл бұрын
Sincere video. Glad you took the time to save us a hassle
@larrymccallister1433
@larrymccallister1433 3 жыл бұрын
Like the way he emplaned it straight forward
@dannyspring5146
@dannyspring5146 Жыл бұрын
You should’ve been a professor. Incredible job explaining everything.
@FrankChristopherOutdoors
@FrankChristopherOutdoors Жыл бұрын
Thanks that’s quite a compliment
@keepingup2952
@keepingup2952 Жыл бұрын
You weren't a mechanic, but you became one. Better than one.
@FrankChristopherOutdoors
@FrankChristopherOutdoors Жыл бұрын
Thanks means a lot
@chkchnc
@chkchnc 3 жыл бұрын
Good shit dude, I just did the exact same thing the other day. I took mine out cleaned it with some carb cleaner check engine light went off,
@Roudter
@Roudter 2 жыл бұрын
This is a smart video - right down to how to release the connector. Thanks, really nice.
@Jeff-o2e
@Jeff-o2e 9 ай бұрын
Great video! Helped me out a lot. Thanks.
@The411
@The411 3 жыл бұрын
This helped. I have a transverse 3.5 v6 engine in a 2010 highlander. I looked up the firing order and Bank2 is at the front of the vehicle. Cheers.
@boldricadder5272
@boldricadder5272 4 жыл бұрын
Bullseye! Straight into the heart. Thanks a lot man. You saved my nerves and made my life better.
@paulbuckles5353
@paulbuckles5353 2 жыл бұрын
Good-on-ya! It's so rewarding to be able to function independent of the Motor-Mill. I have a 26 year old Jeep and a 57 year old Volvo. I'm getting to know each vehicle better and better each time I do an upgrade or preventative maintenance.
@FrankChristopherOutdoors
@FrankChristopherOutdoors Жыл бұрын
I hear you me too. thanks for watching
@gaithalbadarin6774
@gaithalbadarin6774 4 жыл бұрын
Thanks man, Much appreciated .. I think you did a great job covered everything in an easy way .. you even helped with the pricing of the parts.
@FrankChristopherOutdoors
@FrankChristopherOutdoors 4 жыл бұрын
Thanks very much for this comment. I really appreciate the kind words. Hope you get your problem resolved
@masoomqurashi4451
@masoomqurashi4451 3 жыл бұрын
Hy
@masoomqurashi4451
@masoomqurashi4451 3 жыл бұрын
Assalam alay kum Muhammad Farhan
@Ratlins9
@Ratlins9 3 жыл бұрын
Nice job, appreciate you making this video to us diy guys.
@anthonytorres1321
@anthonytorres1321 3 жыл бұрын
For not being a mechanic, you did very well! Denso all the way with Toyota, Bosch for anything German, A/C Delco for GM, Motocraft for Ford. Definitely go with Rock Auto for any parts that you need. Kudos! :)
@anthonytorres1321
@anthonytorres1321 3 жыл бұрын
Also, if you can afford it, replace all 4, or at lease S1 and S2 on the bank you're working on.
@bgalvanizer
@bgalvanizer 5 ай бұрын
Great job with this video. Really appreciate your help.
@FrankChristopherOutdoors
@FrankChristopherOutdoors 5 ай бұрын
@@bgalvanizer happy to help thanks for watching
@davidmann6034
@davidmann6034 3 жыл бұрын
👍 this guy has a servants heart ! He'd pull over and change a tire for a lady good man, God bless him !
@anthonyconville43
@anthonyconville43 3 жыл бұрын
An not just for a pretty lady lol 👍
@joyw3361
@joyw3361 7 ай бұрын
Great informative video. Need video to show how to crimp wires together as Amazon now selling without end plug... Never solder. I also had to learn this stuff for myself. Why dealers charging hundreds of dollars for these?
@robertdiamondoil2384
@robertdiamondoil2384 3 жыл бұрын
Great video, a hot engine makes it easier to loosen good to know thank you
@paulpetry3675
@paulpetry3675 Жыл бұрын
Same 02 sensor for all on 4 my 96 Blazer. Excellent video , ty
@MF-qx9fn
@MF-qx9fn 3 жыл бұрын
I had P00051a bank 1 sensor 2 on a 2016 Trd sport had just put in a URD y pipe cat delete; what put was an O2 sim or oxygen spacer; cleared codes with obd2 and then unplugged the battery for a couple minutes and it’s back to normal👌 video was definitely helpful
@pamparker4047
@pamparker4047 Жыл бұрын
God bless you young man
@vaughnharp06
@vaughnharp06 3 жыл бұрын
So helpful and easy to understand, really appreciate you man!
@scottf.3808
@scottf.3808 5 жыл бұрын
Good job with the DIY as somebody will be very appreciative out there.....Good stuff....
@FrankChristopherOutdoors
@FrankChristopherOutdoors 5 жыл бұрын
Thanks Scott!!!!
@doityadamnself8138
@doityadamnself8138 3 жыл бұрын
I love common sense videos like this. Nice job.
@mortichae3402
@mortichae3402 2 жыл бұрын
DAMN GOOD VIDEO STRAIGHT TO THE DETAILS WELL EXPLAINED GOOD JOB BOSS!
@FrankChristopherOutdoors
@FrankChristopherOutdoors 2 жыл бұрын
Thank you! And thanks for watching
@doromorales4711
@doromorales4711 3 жыл бұрын
Great explanation for beginners, great job & God bless.
@edwinprieto9428
@edwinprieto9428 11 ай бұрын
Thank you guy for helping God bless you
@FrankChristopherOutdoors
@FrankChristopherOutdoors 11 ай бұрын
Thanks for watching Edwin please subscribe if you would like to!
@44090mds
@44090mds 4 жыл бұрын
Good job, Frank. Very thorough and helpful. Thanks.
@FrankChristopherOutdoors
@FrankChristopherOutdoors 4 жыл бұрын
Really glad I could help thanks for watching
@BigAlWillis
@BigAlWillis 3 жыл бұрын
We had an oxygen sensor code pop up from time to time on our Honda accord. It turned out to be valves not seating & oil was getting on one of the spark plugs putting oil into the exhaust throwing off the sensor. One way to check for this is look at your plugs also light smoke out of exhaust.
@webbie1891
@webbie1891 4 жыл бұрын
I just replaced all 4 of my 02 sensors for the price of $136. Borrowed the tool from my local auto parts store and did it right in my driveway. Dealerships and chain auto repair shops was quoting me around$237-400 to replace 1 sensor, just for labor. I never pay anymore to work on my vehicle when I can do the job myself
@FrankChristopherOutdoors
@FrankChristopherOutdoors 4 жыл бұрын
I love hearing stories like this. You and I think the same Webster . Good work 👍
@Youtubeiscool865
@Youtubeiscool865 4 жыл бұрын
Where did you buy the sensors that cheap??
@bkanegson
@bkanegson 4 жыл бұрын
@@KZbiniscool865 The O2 sensors that have been working as well or better (might be exactly the same) as OEM are $45 and $47 respectively) are Denso on Amazon for my Tundra. Likely similar for the Taco. Bought anti-seize and a tool similar to that in video as well, inexpensive. Even adding the cost of the OBD2 reader, the whole lot costs less than one O2 sensor replacement at the stealer-ship. And now I'm ready if they ever again pop up.
@ogcryptodaniel
@ogcryptodaniel 4 жыл бұрын
You sure the upstream sensors you got are air/fuel ratio sensors? They do cost a bit more than cheapo downstream O2 sensors.
@discerningmind
@discerningmind 3 жыл бұрын
I'm glad this worked out for you this time. In the future avoid places like Rock Auto and O'Reilly's, and eBay. If you can't afford the genuine item from the dealership the best thing to do is buy from NAPA. NAPA carries the best parts and sometimes better parts than the the dealer. The other parts places are too worried about competitive costs and have the cheapest made parts as a result.
@kenforrester4580
@kenforrester4580 3 жыл бұрын
lol. nothing wrong with RockAuto. you just don't know how to use the site. Napa is only good depending on location, mine never has anything and 2-3x the price of RockAuto for same part.
@frank9649
@frank9649 Жыл бұрын
Upstream are one type, it doesn't matter which side.....downstream is another type, again it doesn't matter which side. It only matter which side for diagnosis and replacement. Some downstream are directly on or behind the catalytic convertor . Thanks for the vid.
@jlinkhart
@jlinkhart Жыл бұрын
I learned bank 1 is passenger side the hard way too. In case anyone is wondering, P0420 is bank 1 downstream sensor, P0430 is bank 2 down stream sensor.
@kfduff
@kfduff 2 жыл бұрын
To release the connector, first push the connector closed tight, push down on the tab at the very back of the female connector whilst pulling on the male connector. If you're removing your old O2 sensor, you can pull on the cable as it doesn't matter if you put stress on them.
@freddiecastro3598
@freddiecastro3598 3 жыл бұрын
Thanks for your help buddy ! Appreciated!
@aloneranger3980
@aloneranger3980 4 жыл бұрын
Great video. Straight and to the point. No fooling around.
@FrankChristopherOutdoors
@FrankChristopherOutdoors 4 жыл бұрын
Thanks Jim
@idrisshuaibu3552
@idrisshuaibu3552 3 жыл бұрын
Please I need his phone number,. I am electrical engineer of auto cars and is I need his phone number..please help
@neryahwilson6499
@neryahwilson6499 2 жыл бұрын
thankyou, i can see your saving many a lot of money here, however, i am afraid to do it myself, i need you to come to southern Iowa and do it for me! 🙂
@FrankChristopherOutdoors
@FrankChristopherOutdoors Жыл бұрын
lol you can do it! I have faith in ya
@miller1
@miller1 3 жыл бұрын
Just replaced both upstream O2 Sensors on my 2004 Toyota Tundra 4.7L after repeated (within 5 minutes of clearing) Check Engine Light with P0031 Error Code as captured from OBD2 scan tool. Got the pair of O2 sensors from 1A Auto for $65.95 and installed them both a couple of weeks ago with no Check Engine Light since. The O2 sensors were well made (SS) came with anti-seize already applied to the threads and great packaging for protection. Easy 30 minute install but you need to get the 22mm O2 sensor socket...
@JIBNINJA9
@JIBNINJA9 Жыл бұрын
Hi Frank, not sure if you’ll see this. How did you get the unit unplugged? I’ve been trying for hours pressing that button. Did you have a lift so you could use 2 hands?
@FrankChristopherOutdoors
@FrankChristopherOutdoors Жыл бұрын
Hi ben. It’s a real pain to get at this specific sensor and no I did not have a lift. I believe there is a plastic tab that needs pressed in in order to pull the connector apart. I’d suggest walking away for a little bit and trying again later. Feel for that tab first then while pushing it in try to get it apart . Not easy but it is doable. You’ll get it.
@JIBNINJA9
@JIBNINJA9 Жыл бұрын
Thanks for the fast reply!! I’ll give it a rest 😅
Test and Fix Bad Oxygen Sensor W/ Cheap OBD2 Scan Tool!
9:59
Budget Mechanic
Рет қаралды 127 М.
Жездуха 41-серия
36:26
Million Show
Рет қаралды 5 МЛН
Sigma girl VS Sigma Error girl 2  #shorts #sigma
0:27
Jin and Hattie
Рет қаралды 124 МЛН
요즘유행 찍는법
0:34
오마이비키 OMV
Рет қаралды 12 МЛН
Here's the TWO SENSORS YOU NEED TO REPLACE FOR BETTER IDLE !!
14:55
How to Clean an Oxygen Sensor
8:15
Ratchets And Wrenches
Рет қаралды 1,3 МЛН
SYMPTOMS OF A BAD OXYGEN SENSOR
3:52
EasyAutoFix
Рет қаралды 1,6 МЛН
NEVER Change Another O2 Sensor Until You WATCH THIS!
7:24
Matt's Shop
Рет қаралды 4,7 МЛН
Ford Quick Tips #81: Removing Rusted Stuck Oxygen Sensors the Easy Way!
13:15
FordTechMakuloco
Рет қаралды 1,1 МЛН
Doing This Will Make Your Engine Run Better
5:00
Scotty Kilmer
Рет қаралды 6 МЛН
O2 Sensor Replacement
20:30
Timmy The Toolman
Рет қаралды 127 М.
How to clean Oxygen O2 A/F Sensor
7:40
Toyota Maintenance
Рет қаралды 423 М.