How to replace a wheel bearing

[@liteprotoss]

I think it's better for people to see videos like this, when they don't go as planned. I'm glad you're able to correct it and show people who may have had the same issue with stuck nuts. Kudos.

[@wayofthewrench]

I couldn't agree more! I hate how tv shows skip all the important stuff and just show clips of stuff and then the final product. I'm trying to do the polar opposite and teach everything in a way people can learn and remember the info. If you deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. Thanks for the watch!

[@Auser12349]

😂 mine would have sequels to what not to do lol. It took me 5hrs to do my front brakes... 😂

[@ashleyholloway1370]

It's better to find a good honest mechanic, pay cash, & bring cookies once a month even when you have no mechanical problems.

[@sweeznit]

Your thorough explanations, tips, tricks, disclaimers, and alternative methods were extremely helpful! This is the best wheel bearing replacement video I’ve watched.

[@wayofthewrench]

Glad you enjoyed it! I do try my best to produce the best content out there, if you liked this video.....you should check out my other videos. If you deem me worthy, I'd really appreciate it if you could share my channel on your social media so I can help more people. Cheers!

[@james-jq8sk]

I have watched quite a few videos on wheel bearing removal/replacement in the past few days, this is the best by far...

[@wayofthewrench]

Thanks James! I really do try hard to make the best videos out there. If you deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. Thanks for the watch!

[@DaleWeckerly]

@@wayofthewrench😊

[@crabdiver5151]

Very well done video! Thanks for all the time you put into this. I appreciate all the extra info when things don't go easy, as this seems to be 90% of automotive work.

[@wayofthewrench]

Oh for sure, automotive jobs can and usually are hard but I LOVE the feeling of completing the job....there's nothing like it. The harder it was, the better the joy too. This was a customer job that went sideways on me so it was good for a video but stressful on me to work on/film/edit/ get the job done on time for the customer. Thanks for the watch Bruh!

[@ianhankin8833]

wow guy, all the little bits of detail you provide are things others don't mention. Love to watch an expert at work. Also the background music didn't make me run for the hills. I try t learn from everything I watch but your videos are the absolute best. Thank you so much,

[@wayofthewrench]

Thanks Ian for your kind words! I do try very hard to make the best videos I can so it's always nice to hear back from people. If you deem me worthy, I'd really appreciate it if you could share my channel on your social media so I can help more people. Thanks for the watch and welcome to the channel!

[@deeshankumar6526]

He is one heck of of a mechanic. I would recommend this guy to open a training institute.

[@wayofthewrench]

Ahh Deeshan, you just made my day! ......and gave me an idea. Once my channel really takes off, I will probably do training sessions/workshops that are open to the public. That'll have to be down the road though as I will need another shop to do this. If you deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. Thanks for the watch and your kind words!

[@soundsolutions]

Well done, you where taught to do a job properly. Love the step by step checks (secrets) as you go. An old school mechanic.

[@wayofthewrench]

Thank you for your kind words! Yeah I try to do everything I do to the best of my abilities and try to teach others the way of the wrench too! If you deem me worthy, I'd really appreciate it if you share out my channel on your social media so I can help more people. Thanks for the watch!

[@sherridodd1299]

No. Thank you! Your comprehensive videos have helped me make a realistic evaluation of my ability to DIY. I can see that trying to do this on my own would cost me far more in tools and headaches than it could ever cost me to pay someone with your experience to do it. ❤

[@wayofthewrench]

You're very welcome, yes it is a lot of work and requires the tools and knowledge to be successful. However, this is how people learn how to do this stuff. I am self taught and after decades of doing these jobs you learn how to do it and all the tips/tricks. Now I am just trying to share my experience with my students and my subscribers. If you deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. Thanks for the watch and your support for the channel. Cheers!

[@richardcrocker4602]

Thanks for the video. My Rogue needs this done. I don't have some of the tools - blow torch. So getting it done through a shop but thanks again. Looks simple enough.

[@wayofthewrench]

You're very welcome. Sometimes you don't need all of the tools but often you do and when you really do, it is mandatory. I've done lots of bearings now and have done them without the torch too. Thanks for the watch and welcome to the channel!

[@yoshibuta926]

This is a great video from how to check it to how to replace it. And with the added info.s to look out for. Very well done. Thank you sir.

[@wayofthewrench]

Thanks, I'm glad you enjoyed the video and my teaching style. If you deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. Thanks for the watch and welcome to the channel!

[@frankfranze5538]

Thank you 😊 🙏🏼 keep posting video's! You are very calm and keep it straight forward for us non mechanics ! God bless 🙏🏼🙂

[@wayofthewrench]

Thank you very much for your kind words. If you keep watching them, I'll promise to keep making them! I'm glad you enjoyed the video and my teaching style. If you deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. You keep watching and I'll make you a gearhead! Thanks for the watch and your support for the channel!

[@DianaCruz-w1m]

I have the moaning or growling sound coming from the left wheel of my 02 Cadillac DeVille. I've never done this job before. I'm a female and it has to be fixed. Your video told me everything. Thank you so much your the bomb.

[@wayofthewrench]

Cool, I'm glad you enjoyed the video and my teaching style. If you deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. Good luck with your bearing replacement. Thanks for the watch and welcome to the channel!

[@chesta5397]

Terrific step by step guide. This is all I needed to know and tackle my next job. Thanks man.

[@wayofthewrench]

Glad you enjoyed the video and my teaching style,! If you deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. Thanks for the watch and welcome to the channel!

[@bridgettevillanueva992]

I enjoyed watching..I felt like I could do it myself but I don't have the right tools . Thanks

[@wayofthewrench]

Good, glad you liked the video. It's hard to say because sometimes all the parts come out easy and sometimes they are rusted beyond measure and require way more effort and specialty tools. Thanks for the watch!

[@tracydavis5501]

My first experience with Way of the Wrench. Excellent video. Sir you are an excellent teacher. You are knowledgeable and make the information very relatable and understandable. Thank you. I am your newest subscriber.

[@wayofthewrench]

Awesome, glad you liked the video and my teaching style! If you deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. Thanks for the watch and welcome to the channel Tracy! Cheers!

[@tf9160]

Thank you I have much more respect for my mechanics efforts to keep the car running safe. Keep up the good work

[@wayofthewrench]

You're very welcome, glad you enjoyed the video and my teaching style. If you deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. Will do. Thanks for the watch and welcome to the channel!

[@derekgreen7319]

This is a great channel. Stick it out I know this channel will get big!

[@wayofthewrench]

Ahhh dude, I hope so...It is a ton of work and it is hard to see how few views some of my videos have. It is picking up and seems to be taking off but I think it is still a long ways a way. Thanks for the watch and it always makes me happy to hear comments like this. If you deem me worthy, I would really appreciate a share out on your social network so I can help more people out there. Cheers!

[@derekgreen7319]

@@wayofthewrench Ive watched several channels grow over the years . You have a wealth of knowledge and a great presentation. I can definitely see it grow !. Thank you for your hard work !

[@Giddapup]

Very professional with excellent explanation

[@wayofthewrench]

Thank you very much for the kind words! If you deem me worthy I'd really appreciate it if you could share out my channel on your social media so I can help more people. Thanks for your support!

[@steveh100]

Great video..... here to see if I could do this job myself, Im not yet convinced I could, you have obviously done a few of these 😂 and your expertise is obvious and well put across. Thank you.

[@wayofthewrench]

Thanks! I'm sure you could do it but the issue is whether the job requires heat to loosen stuck parts. Otherwise the job isn't too hard. You only learn by doing it yourself and that's how I learned. This is probably only my 5th or 6th wheel bearing hub assembly replacement I've done. Thanks for the watch!

[@UbaldoD-bx1ip]

great videos but i noticed that when you reinstall the axle nut appeared that you over tightened, won't That damage the bearing.? if not torqued properly.? my opinion.

[@wayofthewrench]

It depends on the vehicle and their torque specifications. If they are low enough, you can get someone to hold the brakes and torque it with a torque wrench. I just did a Mazda Tribute the other day and it was only 100 ft-lbs. Some vehicles are quite high like several hundreds of ft-lbs. So in a lot of cases, an impact is ok especially if it's only a couple hits after the axle nut bottoms. Best advice is torque to proper specs though. Hope this helps. Thanks for the watch and welcome to the channel! Cheers!

[@gregsmith332]

@@wayofthewrench two questions: 1) Does the impact wrench has a +/- 4% accuracy rate, which is the industry standard? 2) Is the torque on the impact wrench adjustable in 1-foot-pound increments or is it just high, medium and low? if It's the latter, it's not accurately torqued. This is how you get premature bearing failure.

[@Vintage.Wheels]

This is a fantastic video, I'm glad you showed that seized castle nut. If I were to add anything to this video, maybe a warning to folks working on older vehicles where wetting down the brakes is a MUST due to the potential of asbestos brake shoes. Also, keep those safety glasses on! Parts are replaceable, your eyes aren't! Love your videos, helped me with some issues I've been having with a 1968 GMC pickup 👍

[@wayofthewrench]

Thank you very much! Yeah not a bad suggestion to wear a mask or wet the brake area. I find it's not too bad as long as you aren't blowing or disturbing dust too much with an air wand. Thanks for the watch and your support for the channel. Cheers!

[@roccozarcone4393]

Great video you explained it well, all videos should be like yours❤

[@wayofthewrench]

Thanks! If only I could get some exposure like some of the KZbin channels out there....feel free to share out my channel on your social media so I can help more people. Cheers!

[@818omax]

Would have been nice to do another test drive. great video.

[@wayofthewrench]

It would have been a quiet video......lol. Yeah not a bad idea for people to hear what it should sound like too. Thanks for the watch and welcome to the channel!

[@SindeliaisSin]

So being a woman and I know how to do a little bit of stuff. But your instruction and direction gives me the confidence to delegate and direct my husband to do it😂😂 Thanx so much !!! Oh and I've subscribed. (I really do some of my own auto work)🙂

[@wayofthewrench]

Awesome, thanks for your kind words and the sub! If you like my teaching style, I'd really appreciate it if you could share out my channel on your social media so I can help more people. Thanks for the watch and welcome to the channel!

[@p19shelt]

Ya ur good bruh! So I'm in a pinch, is it OK if I use the old nut just for the time being? ​@@wayofthewrench

[@mikep4545]

Thanks for walking through the check procedure.

[@wayofthewrench]

No worries, glad you enjoyed the video. If you deem me worthy I'd really appreciate it if you could share out my channel on your social media so I can help more people. Thanks for the support of the channel!

[@carlwill5009]

I like your videos, thank you for sharing them. I do work on my own cars. I have replice will burings in the past? I had to do my son's wife's GMC 2010.

[@wayofthewrench]

Awesome! Glad you liked the video. Yeah it's a lot of fun to work on your own cars. Cheers!

[@xdeadpool21xx__xsuka46]

Wish I was in your area bought a vehicle off marketplace back tire has a wobble pretty bad one too great video 👌

[@wayofthewrench]

Oh that sucks! Well ya can figure it out and give it a go at fixing it now. Let me know how it goes! Thanks for the watch!

[@anicetotrujillo6721]

This guy does good. Explaining step by step👍👍

[@wayofthewrench]

Thank you very much! If you liked this video, you'll love the rest! Thanks for the watch!

[@JoelNavarrete-rk3iq]

Very helpful video & thank you so much.

[@wayofthewrench]

You're very welcome and I'm glad you enjoyed the video and my teaching style. If you deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. Thanks for the watch and welcome to the channel!

[@Trump-The-GREATEST]

Amazing explanation. Very similar process for my BMW f10 👍

[@wayofthewrench]

Thanks Bruh! Glad it helped! Welcome to the channel! Cheers!

[@FiliYonas]

Nice and clear work explain. Thank you

[@wayofthewrench]

Awesome! Glad you enjoyed the video and my teaching style. If you deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. Cheers!

[@ArbyCreations]

Love your style, very well explained.

[@wayofthewrench]

Glad you liked it! Hopefully I earned your subscription today. Thanks for the watch!

[@baizorammeskabzmeska6962]

Very expert brother and also very clear

[@wayofthewrench]

Thank you very much. If you deem me worthy I'd really appreciate it if you could share out my channel on your social media so I can help more people. Thanks for the support and the watch!

[@ZodiacManiac]

Excellent video!!! Your remind me of my dad and are def old school love it❤

[@wayofthewrench]

Thank you very much! You're Dad must be a cool guy..lol. if you deem me worthy I'd really appreciate it if you could share out my channel on your social media so I can help more people. Thanks for the watch!

[@arabyalyemani5855]

Great video bro. You helped me a lot on this . A million thanks.

[@wayofthewrench]

A million your welcomes! If I was able to help ya out, I'd really appreciate it if you could share out my channel on your social media so I can help more people. Thanks in advance!

[@sala8704]

Great video, very well explained.

[@wayofthewrench]

Glad you enjoyed it! Welcome to the channel!

[@jgoodman75]

this was very well done! Thanks

[@wayofthewrench]

Glad you liked it! Thanks for the watch!

[@chishagregory9414]

Thanks for your educative video.❤

[@wayofthewrench]

My pleasure 😊. Glad you appreciated the video. Thanks for the watch. Cheers!

[@amirfalahat6720]

Thank you, it was really helpful

[@wayofthewrench]

You're very welcome, glad you enjoyed the video. If you deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. Thanks for the watch and welcome to the channel!

[@rajgill7576]

Would you only replace the bad bearing, the axle, or all 4 at a time?

[@wayofthewrench]

You are supposed to change both bearings on an axle but I have changed just one if a person's budget is tight and the axle isn't connected to the other side. I wouldn't change all 4 though because the way life goes, you'll end up selling or having it written off before you would need to do the next set. Thanks for the watch and the good question!

[@Optimistic87645]

Where is your shop located sir,I love how informative you are seems pretty experienced

[@wayofthewrench]

Vancouver, Canada. Thanks, I do try to make the best videos I can so I can share my experience with people. If you deem me worthy, I'd really appreciate it if you could share my channel on your social media so I can help more people. Thanks for the watch!

[@masonloh1411]

If one side is bad. do you recommend changing the other side? since I'm at the mechanic shop & prevent future problem. Thanks AAA+++ video

[@wayofthewrench]

It is a good practice to change both on an axle because the other side has just as much wear. However, I have changed a few vehicles where we only did one side. Thanks for the watch and welcome to the channel!

[@DaleWeckerly]

Can I do this to my Toyota Tundra I have both wheel bearings for rear. Some said I’d have to press the bearings in

[@wayofthewrench]

It depends on the vehicle, some have wheel bearing hub assemblies, some have pressed in bearings, some have bearings that can be hammered in and out, and some require a slide hammer to remove too. You'll have to take a look. Thanks for the watch!

[@fallonstone408]

LMAO 5:01 "Not a bad idea to wet the brakes down to prevent airborne asbestos" as he breathes in 'no mask' as the dusty rusty murky air hovers around his face/ Reminds me of my dad when i was a kid he would tell me "dont start smoking its very bad for you" as he drew another drag from his cigarette. Great informative vid!

[@wayofthewrench]

Lol, safety squints set to max! Yeah should have shown the wetting of the brake parts but it can make filming harder. Thanks for the watch and your support for the channel! Cheers!

[@csvscs]

Nothing wrong with gloves. Why are you so anti glove?😂

[@diane-mn8ou]

Good speaker you know what you are doing ihave always used zep pentertraing oil does the wax work better I didn't see smoke your way

[@wayofthewrench]

Yeah the candle wax does wonders as it wicks into the threads. There can be smoke, it just depends how hot you get it. Thanks for the watch!

[@miridunn]

how do you now if the vehicle needs a new hub assembly or just the wheel bearing? Specifically kia forte 2010

[@wayofthewrench]

They are almost all hub assemblies now but you can google your cars replacement part and see what it shows. Thanks for the watch and welcome to the channel!

[@industrialexitstrategist2022]

Thabk you for the detailed information. New subscriber

[@wayofthewrench]

You're very welcome! Thanks for the sub and welcome to the channel!

[@markball3654]

Great video!!!!

[@wayofthewrench]

Thanks Mark! Glad you liked the video. Lots more where this came from if you liked my teaching style. Hopefully I earned your subscription today. Cheers!

[@danielpowers4550]

Love the video man this is awesome! thanks for making this

[@wayofthewrench]

Thanks dude!

[@brayleighhope4246]

Very very interesting and imformative, thank you so much. Can I ask, what do stores like yours do with the broken parts such as the old broken wheelbearing? How are they disposed or can they be repurposed for anything else?

[@wayofthewrench]

Some parts you can return to get back your core charge but bearings are usually scrap. I collect scrap metal in a bin until it's full and then I put it in a vehicle that I'm going to scrap. Then they give us a bit of money for the scrap value. Thanks for the watch!

[@brayleighhope4246]

@@wayofthewrench Thank you so much for letting me know. I always wondered what happened to broken things. I recently had to get another engine put into my little Suzuki and wondered what would have been done with the broken one. lol Thank you so much!

[@wayofthewrench]

An broken engine would most likely be sent to an engine rebuilder or wrecking yard to be disassembled for used parts. There's lots of money in recycling used auto parts. Cheers!

[@seyyedadamehessabi2831]

you simply rock dude!! What do you think of using a heat gun instead of the acetylene torch?

[@wayofthewrench]

Thanks dude! Glad you enjoyed the video! If you deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. A heat gun might work on some things but a torch is waaaay hotter. Thanks for the watch and welcome to the channel!

[@seyyedadamehessabi2831]

@@wayofthewrench thanks for explaining & i will

[@matteobovmundt5394]

Another awesome video 👍🏻 informative with do’s and dont’s, so if one tries, they won’t mess it up 😃 thank you for this 👍🏻😎

[@wayofthewrench]

Glad you enjoyed it! If you deem me worthy, I'd really appreciate a share out on your social media Matteo! thanks in advance!

[@matteobovmundt5394]

@@wayofthewrench absolutely, was an apprentice to become a mechanic back in the day, so it’s great to sit back and watch your videoes and brush up on lost knowledge 😃👍🏻

[@wayofthewrench]

You never went back to mechanics? What did you end up doing?

[@matteobovmundt5394]

@@wayofthewrench no, unfortunately, I ended up loosing my left hand due to a faulty operation. I ended up with a degree in trade&commerce, mainly managing warehouse storage and distribution.

[@wayofthewrench]

Oh dude...wasnt expecting that answer. Sorry to hear that happened. It's crazy how our lives can change with our health, I'm going through my own stuff right now. Cheers!

[@bannedagain.8334]

Ive done this in the street with no power tools years ago..getting the big old castle nut off was fun...

[@wayofthewrench]

Yeah that's where the fun is.......lol. been there , done that. Much easier with heat but ya gotta have the heat. Thanks for the watch!

[@billsmith5166]

It may already have been mentioned, but there isn't any asbestos in pads any more. I think it's been since the 80s but I'm not sure. Thanks for the great video!

[@wayofthewrench]

That's not true, not all manufacturers, especially aftermarket ones have removed asbestos from their friction material. They are still very much able to be on your vehicle so I just treat them all as asbestos ones. The brake dust even if it isn't asbestos is not healthy to breathe in anyways. Thanks for the watch and welcome to the channel!

[@ma15033186]

hey i need to replace my wheel bearing and i saw ur vid , my car has the same issue as this car but its only in one back wheel but i heard its better to do both back wheels, my car is a fwd . Is it really necessary to replace both ? and what are the consequences if i do only one

[@wayofthewrench]

Yeah you are supposed to do both but I have done just one bearing sometimes. They both have the same amount of km on them so they usually wear out together. Sometimes if only one bearing is replaced, there can be issues with differential or transmission wear. Thanks for the watch!

[@LouiseDenny-y8f]

I hope everything goes well when they change my wheel bearing like your work

[@wayofthewrench]

Yeah they can be easy....and they can be rough. Hopefully yours is easy. Thanks for the watch and if you deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. Cheers!

[@The_king40]

Bro God bless you, you save me much money 💯

[@wayofthewrench]

Awesome! Glad I was able to help you out! If you deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. Thanks for the watch and welcome to the channel!

[@sabahudindervisevic8621]

Exelent explanation.Thanks.

[@wayofthewrench]

Glad it was helpful! If ya liked the video, feel free to share out the video and channel on your social media. Thanks for your support and the watch!

[@sabahudindervisevic8621]

I will.

[@wayofthewrench]

Appreciate the support! Cheers!

[@tonyh5545]

Great video wish you are my teacher definitely good knowledge , I've subbed 👍👍

[@wayofthewrench]

Thanks Tony, that means a lot. Are you in high school? Well I'm your teacher now! Cheers!

[@syc1016]

Do you have to change both sides or just the side that have the wheel bearing issue? And what is the cost range to replace the wheel bearing?

[@wayofthewrench]

You should but if money is tight, I have changed just one. They are about $250-300 CAN just for the part and labour can easily double if not triple the cost. Hope that helps. Thanks for the watch and welcome to the channel!

[@deejohns8894]

You make it easy,How much does a job like this cost?

[@wayofthewrench]

It all depends on the vehicle and whether or not it's seized on. Parts and labour could easily be $1,000. Lots of savings to do it yourself though. Thanks for the watch!

[@davidw2854]

nice video mate

[@wayofthewrench]

Thanks David! If you deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. Thanks for the watch and welcome to the channel! Cheers!

[@DellyThins-td3ym]

Thanks I've got noise at the front wheel in reversing and forward how will I do

[@wayofthewrench]

What kinda noise? Could be CV axles or something else too.

[@shedrickarnold466]

thank you so much very very helpful

[@wayofthewrench]

Happy to help Shedrick, thanks for the watch!

[@alexanderappell3606]

Quick question, I have a Suzuki Every (Da64V.. the non turbo) and when I turn the wheel a bit to the right it makes a metal scratching sound but it does not happen when I start slowing down or turn left. I am thinking it is a bad wheel bearing on the drives side (right side) but could it possibly be part of the drive shaft?

[@wayofthewrench]

I have a great video on road testing a bearing you should check out too. Usually metal scraping sounds are not bearings but something else that spinning like brakes or wheel well touching the edge of tires. Hope that helps. Thanks for the watch and good luck!

[@alexanderappell3606]

@@wayofthewrench watched the video and yep, it’s a bad wheel bearing. Thanks for the tips. They are great!

[@wayofthewrench]

Sweet, glad I could help! If you deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. Cheers!

[@i8Rout]

0:45 crack the lug nuts? Tighten or loosen?

[@wayofthewrench]

Crack loose ( loosen quickly). Thanks for the watch!

[@wassimjacob9485]

Great instructor. 🍺

[@wayofthewrench]

Thanks 👍 Awesome, ya made my day! If you deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. Thanks for the watch and your support for the channel. Cheers!

[@سعدالبك]

Thank you very good working

[@wayofthewrench]

Glad you enjoyed the video. Thanks for the watch and welcome to the channel!

[@machineslave3]

Tackling this job in my Mazda. All the bolts came off easily, but the wheel bearing feels stuck on. Going to try beating at it a bit with a sledge. If I can’t do it then I’m just going to bring it into a shop. Not going to mess around this time and have to call a mobile mechanic.

[@wayofthewrench]

Sometimes the bearing gets really rusted in and requires heat and a sledgehammer. There is also a hub puller that you mount and then smash with a hammer to get it to pop. Good luck!

[@GerBargerbos]

Great stuff here!

[@wayofthewrench]

Thank you very much! Hopefully I earned your sub today. Thanks for the watch!

[@Gladiator74]

I appreciate the tips!

[@wayofthewrench]

Glad you enjoyed the video, hopefully I earned your subscription today. Thanks for the watch!

[@jonklei1]

While candle wax will work some penetrating oils (seafoam deep creep comes to mind) do very well with heat and suck in a lot easier. I was doing the brakes on my 07 mustang and the slide pins were frozen in and mapp gas and seafoam got them moving. Still needed new ones of course but wax didn't even give a hint of going in. Saved me from having to buy a new caliper bracket.

[@wayofthewrench]

Yeah it's about the same, just be careful not to start a fire spraying penetrating oils. Sometimes just the heat is all you need, the lube just prevents galling on the way out. Thanks for the watch and welcome to the channel!

[@reinerutria-ramirez6087]

How do you find the torque settings for each specific vehicle?

[@wayofthewrench]

Service manuals, owner's manual, Alldata or Mitchell on demand, Chilton's manuals.....lots of places. As a very rough estimate, you can add up the lights and times it by 20 ft-lbs and that'll give you a setting for your torque wrench. Thanks for the watch and welcome to the channel!

[@rallya9543]

You know your job. I just changed wheel bearings but I can feel the car doesn’t pull as it was and it runs jerky with still some whooo noise that made me take it in for service. What should I do?

[@wayofthewrench]

Hard to say but perhaps fasteners weren't torqued enough and are coming loose? You could lift the car and check for wheel looseness again. Good luck!

[@suzanaurbano736]

Would this process be the same for a 2015 Toyota RAV4??

[@wayofthewrench]

Yes it should be exactly the same. Thanks for the watch and welcome to the channel!

[@Kelvin-b3j]

Thank you pro 🙌

[@wayofthewrench]

You're welcome 😊. Glad you enjoyed the video. Cheers!

[@jcmx0180]

Where can I find the torque specs for certain bolts it you don’t have the manual or online

[@wayofthewrench]

If you can see the lines or the numbers on the head of the bolts then you can look up the torque charts online. You'll need to know the grade of the bolts and the diameter plus the pitch. You could also look on forum posts but confirm with the online torque charts. Thanks for the watch and welcome to the channel. Cheers!

[@bobbyserchion]

Good video man 😂😅😊

[@wayofthewrench]

Glad you enjoyed it! Hopefully I earned your subscription today! Thanks for the watch and your support for the channel!

[@jonahcrandall2143]

shot in the dark, but i'm pretty sure the rear hub bearing on my 2000 ford mustang is bad, and whenever i search up a replacement part all that pops up is stuff for the front, what should i search for?

[@wayofthewrench]

I would go to a local auto parts store and see how much they are and ask them for the manufacturer and part number. Then you will have the info to search on the net. Hope that helps. Thanks for the watch and welcome to the channel!

[@roberthunter6927]

Some drums have a small, countersunk screw which you will have to undo to get the drum off.

[@wayofthewrench]

Yup you're right, some do. They can be a pain to take out too when they're seized up. A little heat and an impact driver works wonders. Thanks for the watch and welcome to the channel!

[@nickmansill3377]

Yes really awesome video.. Best I've seen with the tips N tricks.. Right down to the background audio track.. Yeah very good, many thanks!

[@wayofthewrench]

Awesome, thank you! I appreciate your kind words. If you deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. Thanks for the watch and welcome to the channel! Cheers!

[@jerrythomas1977]

Thank you sir job well done

[@wayofthewrench]

Thank you very much! Hopefully I earned your subscription today so I can teach you more stuff! Thanks for the watch!

[@jerrythomas1977]

@@wayofthewrench yes i did subscribed and liked its great when people share their knowledge

[@wayofthewrench]

Cheers! Yeah it's great to help people too!

[@jerrythomas1977]

@@wayofthewrench yes sir

[@wayofthewrench]

Cheers!

[@edromano2031]

05 town car trunk latch assembly shimmies when closing , wont pull down and lock.

[@wayofthewrench]

Sounds like something is interfering with the closing or the latch. The latch could also be out of alignment. Sometimes there is an electrical motor that pulls the latch down that might not be working too. Hope that helps. Thanks for the watch!

[@ivanramirez8247]

Just what i needed to find how to replace those rusted bolts

[@wayofthewrench]

Yeah this is one of if not the best trick for stubborn bolts/nuts.....heat

[@magnmfc]

Awesome. Saved a ton of money that Toyota was going to charge me….and the satisfaction of doing it myself.

[@wayofthewrench]

Perfect! That's what it's all about. Pride...my friend. Cheers!

[@genoaoak]

A couple of M8 bolts driven into those threaded holes on the rotor will pop that rotor off without any hammering.

[@wayofthewrench]

Yeah if your rotor has them you can totally use them. Watch out if you have internal drum brakes though as they can break springs if the shoes are worn into grooves. Thanks for the watch!

[@arthurwilkinson7318]

Good job

[@wayofthewrench]

Thanks! Glad you enjoyed the video!

[@johnguilfoyle3073]

Be advised. When moving to a bigger tool, you need to make sure you have enough air supply. Ya gotta let the Big Dawg eat! When I sold tools for Mac Tools, a customer wanted a 1" impact gun for big truck work. I delivered the tool, but he wouldn't buy the hose I had ordered for the gun. The following week he wanted to return the 1" Impact because it wasn't working right. I left him the 3/4" hose and fittings to set it up properly. When I asked him about it the next week, he said it scared him how much more power it had on the first hit.

[@wayofthewrench]

That's a great tip and something that would totally slip by people's minds. That being said, in our shop we almost never use this 3/4" impact gun so probably a waste to get that set up in our shop. Thanks for the suggestion.

[@terrawilcox2911]

Best video

[@wayofthewrench]

Thanks!

[@simonwale6993]

Thank you 🙏😊

[@wayofthewrench]

You're welcome 😊. Hopefully I earned your subscription today. Thanks for the watch and welcome to the channel!

[@shelbynoelletaylor2039]

Thanks guy!

[@wayofthewrench]

You're very welcome!

[@BA-in1js]

Can you change the bearing itself rather to open and change all the hub assembly and this will save money and time.

[@wayofthewrench]

Not this type. There are 3 types: bearing hub assemblies, press in type, and thrust style with inner and out races. This type is a complete unit and cannot be fixed....just replaced. Thanks for the watch!

[@marioduque1137]

Excelent , thanks a lot .

[@wayofthewrench]

Thanks for the watch! Cheers!

[@robertknaggs4871]

Keep going like them

[@wayofthewrench]

Thank you, I will

[@gottosahani7571]

Goooood job

[@wayofthewrench]

Thanks Bruh!

[@rickyrishel8198]

Topnotch video ty

[@wayofthewrench]

Thanks Ricky! Glad you liked the video, welcome to the channel!

[@roccozarcone4393]

I have a 2001 Hyundai Santa Fe that needs a rear wheel very hard’s. I think they are pressed on. I am not 100% sure if you can please get back to me and let me know. Thank you very much.

[@wayofthewrench]

As far as I know it has a rear wheel bearing assembly just like this video. Thanks for the watch!

[@fredholt3591]

So grate 2 wact a true macanic❤

[@wayofthewrench]

Thanks for the kind words and welcome to the channel!

[@jackruby4680]

What about the front bearing replacement?

[@wayofthewrench]

The fronts did not need doing so we're not done. They would be exactly the same method to replace. Thanks for the watch and welcome to the channel!

[@snapmalloy5556]

Great stuff

[@wayofthewrench]

Thanks bud! Thanks for the watch!