That's great to see you keeping the old tech alive. I'm old school and I'd say 95% of the welders I've known have no clue about brazing. I use it constantly. Even had bosses look at me funny when I'm ordering brazing rod
@wayofthewrench9 ай бұрын
Thanks! Nothing wrong with old tech, sometimes it's better than any new tech. Lots of factors decide what kind of welding should be used for any given project. Glad you liked the video and if you deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. Thanks for the watch and welcome to the channel!
@S1LV3RBACK19 ай бұрын
@@wayofthewrench I sure will.. For sure having as many possible methods at hand are more tools for the box. If I'm stuck without a torch or just plain outta gas, I'll take an arc welder every day. With SMAW you can not only weld just about any type metal, you can cut, pierce holes, preheat, weld studs and gouge. The cutting and drilling might be a little rough, but it's better that standing there with a MiG gun in your hand scratching your head. Lol
@hoamai27348 ай бұрын
Yup
@DavidCNagy10 ай бұрын
I think you're a good teacher.... attention to details inspires craftsmanship
@wayofthewrench10 ай бұрын
Thank you for your kind words, I really appreciate it. Ya gotta try your best or it's not worth doing and you can't get better either. If you deem me worthy I'd really appreciate it if you could share out my channel on your social media so I can help more people. Thanks for the watch and your support for the channel! Cheers!
@moman0166 Жыл бұрын
Welding is a art. I got my certification at David Rankin Tech School back in 1970. When I graduated I could have gone to the east coast for $31 a hour in the ship yard. We had to certify in MiG TIG GAS ARCH. We made our own acetylene gas by charging the gas generator with carbide. Some of the guys didn’t get the generator sealed then they lit a cigarette and the top of the generator caught fire and I grabbed a huge leather welding jacket and smothered the fire then sealing the generator. To this day I don’t know why I did that but the teacher Mr Rathbern was shaking my hand.
@wayofthewrench Жыл бұрын
Oh yes, welding is definitely an art form. That's cool, I never even thought you could make acetylene gas. Crazy story! Did you end up working as a welder then? Thanks for the watch!
@HariKarier11 Жыл бұрын
I just sold my acetylene generator. Hated to see it go but enjoyed telling people what it did. They are a bomb if you don't watch them. I still have some carbide. Those were the days.
@MrDoyle07 Жыл бұрын
A tale from the guy who has been there and done that! Excellent. Thanks for sharing that! 👍
@johnm84010 ай бұрын
I can relate , small skill you learned as a dumb youth carry you through your life. Those teachers were the best, and the skills were not part of the class itself for the most part.
@S1LV3RBACK19 ай бұрын
An acetylene generator.. now that's interesting. That'd be a nice back up for when the welding supply is closed. And since it's the second hottest gas, I'll bet you could get a rough cut using just air. First I'ma gonna find out how to make a little generator, then do some experimenting.
@pgoessnitzer Жыл бұрын
I'm a retired machinist, but not too old to brush up on skills. I just discovered your channel and like the way you present the subject and teaching style. I'll be browsing through you library for a refresher and learning new skills as well. Thank you for sharing.
@wayofthewrench Жыл бұрын
Awesome! Glad to have you aboard, welcome to the channel! Hopefully I earned your subscription today. I'm actually a tool &die Machinist by trade too! Thanks for the watch and your support for the channel! Cheers!
@Pashinski111 күн бұрын
What a great video! Both in production quality as well as information communicated! I came here knowing almost nothing about brazing. I was looking for general information as well as technical information. Exactly what I was looking for.
@wayofthewrench10 күн бұрын
Thank you very much! I try very hard to make quality videos for people so if you deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. Thanks for the watch and welcome to the channel!
@daveqlockard Жыл бұрын
Even though I knew how to weld, I can truly appreciate your teaching techniques. Along the way, I have learned bad habits, and I think I can definitely improve with you! Thanks!
@wayofthewrench Жыл бұрын
That's awesome Dave! Glad I could share my experience with you. Thanks for the watch!
@Rein_Ciarfella Жыл бұрын
I found your channel while researching brazing technique in order to repair holes in the bottom of a fuel tank on a Briggs & Stratton mower with a pulsa prime type carb/tank system. I’ve come across two tanks which are both rotted out in the same location - the lowest point in the tank where water will always settle. I’m aware of safety issues repairing a fuel tank. I’m very impressed with your superb production values and have subscribed to your channel. I’ll be going through your entire welding playlist as a refresher and to fill in gaps in my knowledge. I took a welding class at Mass. Maritime back in the late 1970’s, acquired a complete gas welding setup and built my welding cart as a first project but have hardly used the equipment since then. I’ll probably need to replace at least the hoses, but will be testing every part for leaks. I’ve already watched Episode 2 and already use soapy water to pressure/vacuum test small engine equipment so I’m familiar with the procedures. I also just acquired a leakdown tester so I may be able to use that to confirm gauges are accurate. I’ll ask other questions separately.
@wayofthewrench Жыл бұрын
Cool, thanks for the subscription! Yeah I try very hard to make the very best videos I can for my viewers so it's always nice to hear from subscribers. Good luck with your gas tank repairs! Welcome to the channel!
@Zclip682 ай бұрын
Thank you so much for this video! I had 2 uncles growing up, both with their own HVAC companies. At 13, I started working for the uncle that would do things like counting rafters instead of using his tape measure. He taught me how to braze,,, with an oxidizing flame, as it turns out. Seeing you work and just hearing the correct adjectives brought back so many memories of places I went wrong, and where I literally stumbled upon the right techniques. Now, 40+ years later, everything makes so much more sense. Better late than never, I reckon. :)
@wayofthewrench2 ай бұрын
Sounds like you had some cool uncles that cared enough to try and teach you their skills. Lots of old school skills being lost these days. Hopefully I can help more people learn these skills before they're gone. Thanks for the watch and welcome to the channel!
@lukieboy5492 жыл бұрын
This guy clearly knows what he is doing and explains everything really well thanks
@wayofthewrench2 жыл бұрын
Thanks dude! If ya deem me worthy, maybe you could share out my channel on your social media so I can help more people. Cheers!
@guzzidude74102 жыл бұрын
I learned to braze as a child, when brass coat hangers were plentiful and one could purchase most anything from the hardware store and pharmacist. It's been a very useful skill making for a handyman.
@wayofthewrench2 жыл бұрын
Neat! I didn't know hanger came in brass...score! Yeah sadly everything is changing from being able to fix anything to having to buy a new one. I can't imagine a world where I couldn't make stuff. Thanks for the watch!
@erickaplun97779 ай бұрын
@5:20 your speech is gold. About the 'fusion' of trades. I try explain my similar perspective to others. This is my first time watching one of your videos. But i honestly think you may be the best teacher ive seen so far on youtube. And I've watched a bit lately. Your explainations are golden! Thank you. I am actually electrician by trade. Was trying to figure out the difference between soldering and brazing when i stumbled upon this video.
@wayofthewrench9 ай бұрын
Thanks Eric! I do try very hard to make the best videos I can so it's always nice to hear from subscribers! I just wish KZbin would suggest my channel more cause it's hard to be seen in a sea of videos on KZbin. If you deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. I'm actually a red seal tool and die maker by trade and now tech Ed teacher in a high school. Honestly soldering and brazing is the same process except with different heat ranges and brass will be stronger than solder. Otherwise they are much the same. Soldering uses much lower temps so it's faster, safer, and causes little to no warpage or oxidation to parts which is pretty key for electronics/electrical connections. Glad you found the channel and thanks for the watch. Cheers!
@WorkingPrincipleZ2 ай бұрын
excellence balance between theory and practical explanations
@wayofthewrench2 ай бұрын
Awesome, I'm glad you enjoyed the video and my teaching style. I try very hard to make the very best videos I can for my subscribers. If you deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. Thanks for the watch and welcome to the channel! Cheers!
@toomuchthinkin2 жыл бұрын
@9:12 You are explaining the trade for everything in this. And yes you are spot on. Need more teachers with such an understanding. Give a man a fish vs. teach a man to fish. It’s greatly needed.
@wayofthewrench2 жыл бұрын
Thanks Bruh, I appreciate the kind words. Just trying to help people with all of their skills, not just the technical skills. If ya deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. Thanks in advance and welcome to the channel!
@ADRIAN-zh4ti Жыл бұрын
You are a fantastic teacher! If we had had you at school, I bet many friends would have loved to learn welding
@wayofthewrench Жыл бұрын
Thanks for the kind words! I might not have been there for you and your friends to learn from in highschool but I can still teach you guys. If you deem me worthy I'd really appreciate it if you could share out my channel on your social media so I can help more people. Thanks for the watch and welcome to the channel!
@bobsunkees33926 ай бұрын
You did a pretty good job with explaining it and demonstration been doing that for career and teaching it for twenty five years thanks for sharing your skills and knowledge with everyone.
@wayofthewrench6 ай бұрын
Thanks Bob! I try very hard to make the best videos I can share my experience with people. If you deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. Thanks for the watch and welcome to the channel! Cheers!
@mikemarley2389 Жыл бұрын
We made our own daps using old valve stems and ball bearings by brazing them together.Worked great.
@wayofthewrench Жыл бұрын
Oh yeah? That's cool! I'll have to keep my eyes out for some ball bearings so I can make some. I did make a 4" planishing ball like that for my medieval armour. Thanks for the watch!
@Lwimmermastermetalart6 ай бұрын
I’m a retired toolmaker and a pretty creative fabricator. I do a lot of art pieces that require welding , brazing or silver soldering. I wish I had known all the things you taught on brazing years ago. I struggled to get consistent joints. Now I can see just why I had issues. Great attention to detail. Well done👍🏼👍🏼
@wayofthewrench5 ай бұрын
Nice! I'm a Tool & Die Maker too! Mostly plastic injection and aluminum dies. Good on ya! Glad I could help you out. If you deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. Thanks for the watch and welcome to the channel! Cheers!
@flipflapziegler45003 ай бұрын
I appreciate your demonstration, it was informative. I would like to suggest demonstrations of different joints ( lap, tee, corner, butt) with sheet metal. Hope to see more of your demonstrations.
@wayofthewrench3 ай бұрын
Awesome, glad you enjoyed the video and my teaching style. I do have a gas welding butt joints video you should check out too. Yes, some other joints would be good. Thanks for the watch and welcome to the channel!
@WelderB1Family Жыл бұрын
Ive been welding tig mig stick for 20 years never did brazing, your tone and clarity is amazing. Thanks 👨🏾🏭💯
@wayofthewrench Жыл бұрын
Awesome, thanks for your kind words! I do try my best to make quality videos so it's always nice to hear from subscribers. If you deem me worthy I'd really appreciate it if you could share out my channel on your social media so I can help more people. Thanks for your support and the watch!
@WelderB1Family Жыл бұрын
@@wayofthewrench will do 🤙🏿
@wayofthewrench Жыл бұрын
Appreciate the support! Cheers!
@anthonylathrop76792 жыл бұрын
Is everyone from Canada a brilliant teacher? Something in the water up there. I learned brazing and welding as a kid in my Dad's shop and I still learn a lot from your videos
@wayofthewrench2 жыл бұрын
Everyone? Highly unlikely.....but I have been honing my craft as a teacher fir 12 years now and I'm using my experience from 28 years in the trades too. I find that learning something well requires all of the little details that most people don't know about or lack the experience. Glad you're enjoying the content Anthony! If you deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. Cheers!
@leonardpearlman4017 Жыл бұрын
That's an old joke: There's something in the water, we don't drink it!
@terrenceolivido7412 жыл бұрын
man, i am speechless about your teaching. great.
@wayofthewrench2 жыл бұрын
Thanks again dude, I really appreciate your kind words!
@miaouew4 жыл бұрын
I know there's no money in it but you would make a really good teacher/professor
@wayofthewrench4 жыл бұрын
Thanks, I'll have to tell my principal.....lol. I like to joke that I got tired of making money so I quit the trades and started teaching. Thanks for the awesome comment!
@miaouew4 жыл бұрын
@@wayofthewrench haha. Yeah no problem maybe when you retire from actually practicing your trade you could consider professoring for some extra easy (on your back) cash.
@gasdeevision.89282 жыл бұрын
nah this way is going to reach a lot more ears and eyes that wants to consume !
@wayofthewrench2 жыл бұрын
Nah I'll do both until I either die of exhaustion or KZbin kick starts my Way of the Wrench empire! LOL.
@wayofthewrench2 жыл бұрын
Yeah you nailed that! I teach more people how to safely jack up a car in one month on youtube than 40 years teaching 175 students a year! The amazing comments from viewers has been amazing too!
@jondavidmcnabb2 жыл бұрын
The shots of the torch work in this video are exceptional!!! I watch a lot of welding and brazing videos and this by far is one of the best torch work videos i have seen so far on KZbin.
@wayofthewrench2 жыл бұрын
Much appreciated Jon! I work very hard on my videos so it's always nice to hear back from viewers. They are a ton of work! If you deem me worthy, I'd really appreciate a share out on your social media so i can help more people out there. Cheers Jon!
@jaygee92492 жыл бұрын
Very good video, in my experience as a maintenance fitter, brazing was mainly used on broken cast iron. The golden rule was to file only the cast iron not grind for weld prep. This was to open the pores up and not sealed them up. Makes a better joint
@wayofthewrench2 жыл бұрын
Yeah brazing has its uses for sure. I don't think you can go into a large machine shop and not see something braze repaired like a lathe/mill/drill press/etc. It's also useful for cutter inserts on large face mills so you don't have to buy a whole new cutter, just reheat/knock off the dull inserts/braze on new ones/grind the inserts. That's a good tip about filing over grinding cast iron repairs. I used to not even file them, just use the broken structure to help locate the pieces like a broken coffee cup and make sure the surfaces are really clean. Thanks for the watch!
@johnmeye Жыл бұрын
Excellent teacher! Thank you SO MUCH!
@wayofthewrench Жыл бұрын
Thank you for your kind words! I'm glad you enjoyed my teaching style. If you deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. Thanks for the watch and welcome to the channel!
@Hiddentalent1979 Жыл бұрын
I need to Learn brazing. Been welding for 20 plus years, never done it! You would be a great teacher!
@wayofthewrench Жыл бұрын
You should do it! I love gas welding and brazing.... it's like camping and welding mixed into one. I think you're right....I would make a good teacher. You should tell my Principal! Lol. Thanks for the watch and welcome to the channel!
@chrisunruh6485 Жыл бұрын
Dang you make that look so easy. I know better. lol very well presented information. Thank you for sharing
@wayofthewrench Жыл бұрын
Lol, thanks. It's just like anything else, it takes practice, practice, and more practice. Thank you for your kind words Chris! If you deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. Thanks for the support for the channel, Cheers!
@dbgaither9 ай бұрын
You are a talented communicator. Great video
@wayofthewrench9 ай бұрын
Thanks very much! Hopefully I earned your subscription today. Feel free to share out my channel on your social media so I can help more people. Thanks for the watch and your support for the channel! Cheers!
@tonywright5602 жыл бұрын
This is one of the best how to videos I have ever seen, especially for novice home handy people. It is clear, principle based and safety focussed. The visual quality of the video is amazing. I doubt that I could learn more if I paid someone to teach me. I won't be using oxy acetylene. I don't think it's legally available for the unqualified where I live but I won't need it for what I want to do. Everything else you covered is still relevant. Thank you!
@wayofthewrench2 жыл бұрын
Thank you very much for the kind words Tony! I try very hard to make all of my videos as best as I can so it's always nice to hear back from a subscriber! If you deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. Thanks in advance Tony! Cheers!
@lloydscharf68972 жыл бұрын
You can always learn more.Even if you watch the same video a number of times you will see something you missed before . and if you really want to learn try teaching some one else, they may still see something you missed,or in a way you hadn't considered. IDIC LL&P
@mdw159 Жыл бұрын
@@wayofthewrench The Best video, long video version or short one either are BEST! :D Remember A before O (or up you go,, LoL )
@waylandforge87042 жыл бұрын
Absolutely the best demo presentation on brazing and exceptional presentation skills. Well done.
@wayofthewrench2 жыл бұрын
Thank you very much, I'm glad you enjoyed the video. If you deem me worthy, I'd really appreciate a share out on your social media so I can help more people. Thanks for the watch!
@tracylemme13752 жыл бұрын
I see that most comments congratulate you on you skills and teaching abilities. I must,however, criticize some of your skills and comments. I first held a lit oxy acetylene torch before I can remember, and I have thousands of hours of the torch in nearly 70 years. I love to braze to put it simply. The preferred method of controlling the heat of the torch isn’t by removing the flame but by changing the angle of the flame. The more perpendicular the flame is to the work the more heat is going to be applied. With a more glancing angle, the less heat is going to be applied. Also, the most heat from the flame is a slight distance away from the end of the cone. Depending on the base material, brazing can be stronger than fusion welding. I almost always prefer to braze cast iron to other methods. If done properly, a bronze repair is actually stronger than the original base material. I like to compare brazing to water freezing. The base material must be warm enough so the filler can wet the base. I can go for ever about this,but still, I can’t argue with success. Good job.
@wayofthewrench2 жыл бұрын
Thanks for your expertise! I find that changing the torch angle to change the heat works but depending on the material and how thin it is, this can cause unwanted heat to go into the material. It really depends on the project. Yeah there's lots of info to teach about brazing, just not enough time to get it all into the video. Yes you can make a brazing repair stronger than the original base metal but it isn't as strong as a fusion steel weld repair. Thanks for the watch! Cheers!
@tracylemme13752 жыл бұрын
@@wayofthewrench Most bronze filler rods are stronger than gray cast iron. I have seen castings break after being brazed, and the repair areas remain intact. Thanks for the reply.
@wayofthewrench2 жыл бұрын
Cast iron most likely, I hate welding cast iron. I've repaired a bunch of old lathes and mills with brazing and they've been in service a long time. It would be a nightmare to weld those up. Thanks again for your experience with brazing! Cheers!
@jeremyoshea7941 Жыл бұрын
I’m so glad I found your channel like many other good ones it’s by accident. I was looking up flux core welding and I learned so much more than I thought I knew tricks of the trade and practice patience piece off. Thank you for your time.
@wayofthewrench Жыл бұрын
I'm glad you stumbled onto my channel dude! I wish more people could find my videos, it's so hard to be seen in a sea of videos out there. Welcome to the channel!
@bicivelo2 жыл бұрын
You have a very calming voice. Great video. I love the geek stuff!!
@wayofthewrench2 жыл бұрын
Thanks! Yeah I'm definitely not one of those scream at you KZbinrs. Lol, I consider all of this tech stuff to be geek stuff.....and I love it too! Cheers!
@allenjay60652 жыл бұрын
This is the first time I've heard someone use the term " ultimate trifacta ". How perfect for what is needed for brazing and welding. As an HVACR specialty electrician, and owning 7 houses, an apartment building, and a duplex, I use my eyes, hands and brain ALL THE TIME when making repairs!! And there are a lot of them!
@wayofthewrench2 жыл бұрын
Glad you appreciated the comment. It is not just skills but a way of living your life and using all of your skills and talents to create amazing things. It's the way of the wrench.....Cheers!
@zzzsydneyhom13792 жыл бұрын
Thanks mate! This is the best how-to on gas brazing that I've ever seen.
@wayofthewrench2 жыл бұрын
Thanks Bruh! Glad you are enjoying the content! If you deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. Thanks in advance!
@garysgarage101 Жыл бұрын
Awesome video. I especially the last 5 minutes of showing “how not to braze”. I have a very small cast iron repair to do on an Atlas 7B. This should help.
@wayofthewrench Жыл бұрын
Thanks! Glad you enjoyed the video! If you deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. Thanks for the watch and Happy New Year's!
@terrenceolivido7412 жыл бұрын
wow, i made my comment and than saw so many others feeling the same. so many of the channels try to entertain people. this guy - in the few minutes - has expressed the core of what a bad teacher would not present. i hate to say it, but what he has presented here and the way he presents it is a significant part of what "made america great." believe it or not, being a good professional is ultimately based on love. i will leave it at that.
@wayofthewrench2 жыл бұрын
Thank you very much Terrence! I work very hard to hone my skills and I am more than happy to help people gain new ones or improve their own skills. I just wish I could reach more people, it feels like my videos are lost in a sea of KZbin videos already out there. Maybe you could help me and share out my channel on your social media so I can help more people. Cheers from Canada!
@soulsharts Жыл бұрын
Today was my first day ever brazing at welding school so I was messing up big time. This video helps immensely. My teacher gave a demonstration, but after that she just walks away and leaves you to it. Which is fine, I guess, but if I'm learning more from free videos from the internet, I can't help but wonder wtf I'm doing paying for my education.
@wayofthewrench Жыл бұрын
That's tough.... I'm a pretty high standard to hold up to your teacher though. Not sure of her credentials but maybe show her my video and ask her what she thinks. After the basics, it's important to learn how to diagnose your brazing/welding so that you can figure out what to improve on. Good luck in your course! Welcome to the channel!
@cterrell1343 Жыл бұрын
very good thorough explanation and demo of a range of skills and tips, thank you. I am trying to re-learn brazing for my job (only got to do it once at school way back) and this is an excellent video. I like to have the background information, it helps to really get a feel for what's happening and why things may not be working sometimes. Thanks.
@wayofthewrench Жыл бұрын
Awesome! Glad you loved the video and my teaching style. If you deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. Thanks for the watch and your support for the channel!
@JedediahBoydston Жыл бұрын
This is absolutely the best how to video i have ever watched. It's not every day you do a Google search and find exactly what you're looking for. I have never done a search that taught me everything I needed and then some. You totally earned a like, subscribe and a big thank you!!!
@wayofthewrench Жыл бұрын
Awesome! I am to please! If you deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. Thanks for the sub and welcome to the channel! Cheers!
@gasdeevision.89282 жыл бұрын
Dude you are a naturale teacher . Thanks for explaining some basic logics into the gray areas not explained correctly by others mentores! Cheers
@wayofthewrench2 жыл бұрын
Thanks Bruh! Yeah I'm trying to build my niche on KZbin with really well taught diy videos, glad you liked them! Cheers!
@gasdeevision.89282 жыл бұрын
@@wayofthewrench hey man I believe when you do something thats great and inspires people , you need to recieve some inspiring results aswell ! recomend me your best video please . and ill watch it
@wayofthewrench2 жыл бұрын
Thanks dude! My best video eh? That's a tough one cause to me they are all my babies but one of my favorite ones is the brazed copper leaf sculpture. Its got a great music track and lots of golden info and new techniques to learn. Let me know whatcha think! If you deem my video worthy, I'd really appreciate a share out on your social media so I can help more people. Thanks in advance!
@ltcajh Жыл бұрын
This helped me reassemble a Thompson drum magazine that I had to disassemble and reseal the spring compartment.
@wayofthewrench Жыл бұрын
Awesome! I'm glad the video helped you out. I'd love to see some pics of your repair, send me some pics of it on Instagram. Thanks for the watch!
@SpaceMonkey231012 жыл бұрын
This is the best brazing video I've seen. You're a natural teacher. Fantastic - thank you very much for sharing your knowledge.
@wayofthewrench2 жыл бұрын
You're very welcome, I'm glad you enjoyed the video! If you liked this video, you'll really like the copper leaf brazing sculpture. It's one of my favorites. I work really hard to make the best videos I can so it's always nice to hear back from my subscribers. If you deem me worthy, I'd really appreciate a share out on your social media so I can help more people. Thanks for the watch and the great comment! Cheers!
@adrewdio2694 Жыл бұрын
Thanks for that detailed description of the proper, not proper, methods to weld, braze metal. Five stars for communication and great that the music was between the instructions. 🙏🙏👌👌📐📐⭐⭐⭐⭐⭐⭐
@wayofthewrench Жыл бұрын
Glad you liked the content and my teaching style! If you deem me worthy, I'd really appreciate it if you could share my channel on your social media so I can help more people. Thanks in advance!
@DJFalkoHannover2 жыл бұрын
I don't really know how I ended up here - but I wanted to know about fillet brazing some bicycle parts and watched your video. You're a fantastic presenter. Really good to listen to. And I learned a lot of the basics. Cheers from Germany.
@wayofthewrench2 жыл бұрын
I'm glad you ended up here too! Thank you very much for your kinds words! Are you making a custom bike? Thanks for the watch. Cheers from Canada!
@DM-fz3ly Жыл бұрын
Great example, great teacher. Your students are lucky!
@wayofthewrench Жыл бұрын
Thank you very much your kind words! I try to make the best videos for my students so it's always nice to hear back from people. If you deem me worthy, I'd really appreciate it if you could share my channel on your social media so I can help more people. Thanks in advance! Cheers!
@nikkilovetheyardsale-again26084 ай бұрын
Man this guy's bad ass!!! Hes taught me more in this video then 20 other people have working together welding. I didnt go to school for it, but my dad is a master steel fabricator/ master welder and makes almost $100 a hr welding under water and atop huge buildings around the globe. He had me welding as soon as i could walk and talk basically, so im nowhere near amature. Its always good to see how other people do the work and to see how they react to yours. I thank you SO VERY MUCH for your time, knowledge, and wisdom. I also need some tios for welding old farming equipment. Thsts what im doing now and its welds iver welds in modt cases but evertthing is just corroded and rusted. Do you have any tips on that? Luckily the welds are under or on the sides of the equipment so it doesnt have to look pretty it just needs to hold well and hope the equipment makes it another year.Hope your doing well kicking metals ass! ❤😂❤
@wayofthewrench4 ай бұрын
Sweet! Thanks, I'm glad you enjoyed the video and my teaching style! If you deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. Most farm equipment is welded with stick welders due to less need for clean metal and deep strong penetration. You should check out my stick welding videos. Thanks for the watch and welcome to the channel! Cheers!
@williamfindlay9525 Жыл бұрын
Thank you for the great lesson! I hope some day you can teach brazing on cast iron so I can fix up my old wood stove. 👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻
@wayofthewrench Жыл бұрын
You're welcome! Yes, I will eventually make one but it might not be for a while. Thanks for the watch!
@GKnee72 Жыл бұрын
Thank you for the short to the point information!! I already learned a bunch and even things that I thought I knew already! Little tips to like finger over the top of the blade when starting the cut.. duh yeah, why didn't I think of that.. lo... l I agree with the comment above, you definitely would make a good teacher!
@wayofthewrench Жыл бұрын
You're welcome Jeannie! Glad you like my content and teaching style. If you deem me worthy, I'd really appreciate it if you could share my channel on your social media so I can help more people. Welcome to the channel and thank you for the watch!
@barrettdamon2 жыл бұрын
Excellent video! Very professional! You are a professor!
@wayofthewrench2 жыл бұрын
Glad you like my teaching style; if you deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. Thanks for your support!
@fire341002 жыл бұрын
Wow!! I have been brazing for 28 years and find this video informative. You taught me something. Just subscribed and will follow you over the next few weeks practising my heat flow!!!
@wayofthewrench2 жыл бұрын
Cool, that's awesome, glad I could teach ya something even though you have that much experience. If you deem me worthy, I'd really appreciate a share out on your social media so I can help more people. What do you usually braze? Thanks for the sub and the praise Christo!
@thomasleclair7418 Жыл бұрын
,,,thanks.....Great video,,,,,,concise,,,,,,,,,,,,,Direct info from a gifted teacher relaying knowledge................
@wayofthewrench Жыл бұрын
Awesome! Glad you liked the video and my teaching style. If you deem me worthy, I'd really appreciate it if you could share my channel on your social media so I can help more people. Thanks and welcome to the channel!
@keithosborne6585 Жыл бұрын
Great video! I do a lot of copper pipe brazing using gas flux/ natural gas/ oxygen flame and 2% silver-phos alloy. I enjoy learning different techniques with different metals. Thank you for sharing.
@wayofthewrench Жыл бұрын
Thanks for the watch! Glad you liked the video!
@JuiceLabs2 жыл бұрын
The science accompanied by your practical experience is both informative and entertaining. I am an electrician wanting to learn to weld for my own enjoyment and projects.
@wayofthewrench2 жыл бұрын
Thanks a lot Bruh! Glad you are enjoying the content. If you deem me worthy, I'd really appreciate it if you could share my channel on your social media so I can help more people. Good luck in your quest for more welding skills!
@johnmacmillan6272 жыл бұрын
Just what I was looking for. Excellent, fast moving presentation.
@wayofthewrench2 жыл бұрын
Glad you liked the video, you'll find all my other videos are in the same style. If you deem me worthy, I'd really appreciate a share out on your social media so I can help more people. Thanks in advance!
@bh.boilers Жыл бұрын
A couple of queries, we were always taught to use a slightly oxidising flame for Braze welding, as it contains the zinc within the weldmetal by forming a thin oxide layer on the filler metal as the zinc within has a much lower melting point and can be lost to evaporation leaving a much weaker joint, this is also reiterated in the early linde books. The others is we were also taught to keep the molten metal within the secondary cone of the oxygen acetylene flame as it consumes the oxygen in the atmosphere thus giving as close to an inert protection as possible. In closing I commend you on the presentation it is good, I shall look for your other videos. Ray.
@wayofthewrench Жыл бұрын
You are correct but I find when teaching students they tend to burn/oxidize the base metal too much with an oxidizing flame so I teach with a neutral flame which is hard enough for them to get to. They also tend to always go into a slightly oxidizing flame anyways as it can be hard to set the flame exactly on a neutral flame. The keeping the flame over the puddle is also correct but once again I find students have trouble with their heat control and burn the braze off without exaggerating the heat control. We also only use one size torch tip to minimize the equipment needed so we don't use smaller tips to allow keeping the torch there. I hope that helps. Thanks for the watch and your good suggestions!
@paulleftwick7782 Жыл бұрын
i think cat litter is used for flux in blacksmithing good video you have me inspired with brazing@@wayofthewrench
@wayofthewrench Жыл бұрын
Cat litter eh? Used? LOL...I haven't used that but we used to use Borax powder for sure. Cheers!
@leonardpearlman4017 Жыл бұрын
!!! Yes! This is a little obscure, but you can read about it in some old BOOKS about welding. It's also a DEMONSTRATION you can easily do for yourself and others: If you have a nice bright clear puddle of brazing rod (or just brass) you'll have that cloud of zinc oxide "fume" to go with it. It bothers some people, and as you say the zinc is getting away. NOW if you slowly turn the oxygen up a little, you will see that cloud go away! And also the puddle will be less bright. It's very visible, it's a good demo! So you don't need a rule for how to set the flame, you can see it for yourself.
@markdmaker3173 Жыл бұрын
Great video, excellent teacher. Well done. Thank you.
@wayofthewrench Жыл бұрын
You are welcome! I'm glad you enjoyed the video and my teaching style! Hopefully I earned your subscription today! Thanks for the watch and your support for the channel! Cheers!
@felixbors16593 жыл бұрын
Very nice and thank you; I wish you put the last sample in the vice too.
@wayofthewrench3 жыл бұрын
Your welcome Felix! The last sample is way stronger but it's also still just brazing, it won't hold up to the vice. It's still a crazy amount of force holding the steel together. I've seen all kinds of machines and equipment repaired with braze and some of it is decades old repairs. Strong stuff! Thanks for the watch!
@JohnSmith-ee7gf2 жыл бұрын
What a clever and talented guy. Love your work ethic too! Very well done.
@wayofthewrench2 жыл бұрын
Thanks very much John!
@wingman358 Жыл бұрын
Great description of brazing
@wayofthewrench Жыл бұрын
Thanks, glad you liked the video!
@ezza88ster2 жыл бұрын
You're a great teacher; explaining everything in a clear sequence. Also great passion for transferable hand skills is refreshing.
@wayofthewrench2 жыл бұрын
Thank you very much for your kind words! I try very hard to make easy to watch/learn videos so it always makes my day when I hear back from my viewers. If you deem me worthy, I'd really appreciate it if you could share my channel on your social media so I can help more people. Thanks for the watch!
@johncauchi79564 ай бұрын
Like your cool down to earth tutor lesson.
@wayofthewrench4 ай бұрын
Thank you for your kind words, I'm glad you enjoyed the video and my teaching style. If you deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. Thanks for the watch and welcome to the channel! Cheers!
@garbo89622 жыл бұрын
Tip for hacksaws: for cutting 1/8" thick flat stock like you had we probably go with a 24 TPI ( Teeth per inch ). Use 32 TPI when cutting thin wall steel like EMT conduit. More then once came across a so called mechanic who had the blade installed wrong. Teeth always face away from the handle. We had at least halve a dozen sizes/types of brasing rods in our large maintenance shop. The stuff that had silver in it & expensive was always locked up.
@wayofthewrench2 жыл бұрын
Thanks for the tips! Yeah we use 24 TPI 12" bi metal blades....good all around but yeah thinner stuff needs higher tpi count. Cheers!
@philbrooks512 Жыл бұрын
The most excellent instruction. Thank you!!
@wayofthewrench Жыл бұрын
Thanks, glad you like the content and teaching style! You'll like the copper leaf sculpture video after this one. Thanks for the watch!
@ericargo9157 Жыл бұрын
Just found your channel. Excellent teaching skills. Looking forward to seeing much more. You have a new student...a 61 y/o student!
@wayofthewrench Жыл бұрын
Awesome! Thanks Eric, glad you like the content and my teaching style! If you deem me worthy, I'd really appreciate it if you could share my channel on your social media so I can help more people. Welcome to the channel!
@ericargo9157 Жыл бұрын
@@wayofthewrench I'll definitely share your channel. Good stuff.
@wayofthewrench Жыл бұрын
Appreciate it Eric! Have a good night!
@standillon84392 жыл бұрын
Great job explaining it to new comers. First year of machinists training they teach you to Braze.
@wayofthewrench2 жыл бұрын
Awesome! That's cool to hear, that's not the norm anymore though I think. Even 26 years ago I wasn't taught brazing in my Tool & Die Machinist classes. I'm lucky to have had an old school shop teacher that taught me how to do it. Thanks for the watch and welcome to the channel!
@stevenlarsen16912 жыл бұрын
I mounted a vice in sideways. That way when you are sawing you are pushing into the floor instead of pushing your workbench. It is also easier to lay your work on the lower jaw and tighten the jaw. Also, it is not taking up so much of your workbench. When I mounted my vice on the side it made it very popular. I mounted one on my toolbox. Saves space and when sawing I'm pushing into the floor instead of pushing my tools bow around.
@wayofthewrench2 жыл бұрын
Oh that's a neat idea, I'd love to see a picture of your vice setup, dm me on my instagram. Thanks for the watch!
@ronmurphy98192 жыл бұрын
Thanks. My father welded for a living. I think I just learned to braze from you. It could be I’ve forgotten but I really want to thank you. I take it like soldering silver, I make jewelry for my wife. I hope to learn more from you in the future . Thanks Ron 😊
@wayofthewrench2 жыл бұрын
That's awesome Ron! Glad I could be there for ya! Yeah it's kinda like silver soldering.....kinda. If you deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. Thanks for the watch!
@ronmurphy98192 жыл бұрын
You got it!
@dannyl25982 жыл бұрын
Thank you. Great video, right on point and no silly BS. You are a great teacher. This video just popped up so I subscribed.
@wayofthewrench2 жыл бұрын
Thank you very much! I try very hard to make the best videos I can so it's always nice to hear back from subscribers. If you deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. Thanks!
@dannyl25982 жыл бұрын
@@wayofthewrench I don't do social media but I did share this video with my son. I told him after he watches it, we will go out to the shop and practice what he learned. Thanks again.
@wayofthewrench2 жыл бұрын
That's awesome! You sound like a good Dad!
@dannyl25982 жыл бұрын
@@wayofthewrench Thanks
@wayofthewrench Жыл бұрын
You're welcome...Cheers!
@vincep1c1562 жыл бұрын
First time watcher and new subscriber! great video!
@wayofthewrench2 жыл бұрын
Thanks Vince! Glad you liked the video and the content. Welcome to the channel!
@theidahodian45182 жыл бұрын
You had me at "Don't wear gloves when using a Wire Wheel" I learned that back in High School Shop class. Another thing I learned was never wear gloves around winch cables, one of those broken wires will pull your fingers right into the winch and make you sad. You're an excellent teacher. Liked, Subscribed and Bell'd.
@wayofthewrench2 жыл бұрын
Yeah ya don't want your hand getting pulled into that mess! Those wire wheels can be pretty dangerous machines if you're not careful....lots of power. I'm glad you like my content and my teaching style! If you deem me worthy, I'd really appreciate it if you could share my channel on your social media so I can help more people. Thanks for the sub and welcome to the channel! Cheers from Canada!
@garbo89622 жыл бұрын
Liked when young guys in our large shop wore gloves even to pick up a clean new 2 by 4. We would watch what glove they put on first. Would use a spray can of never seize to fill up finger tips. Would also placing gluing into their gloves ( takes about 3 days to remove ).
@wayofthewrench Жыл бұрын
Yeah I never use gloves....that would be funny to see in action. Cheers!
@skeeton5772 Жыл бұрын
Just found your channel, great video, I'm just getting started with brazing and this was a big help
@wayofthewrench Жыл бұрын
Glad you found the channel and you found the video useful. If you deem me worthy I'd really appreciate it if you could share out my channel on your social media so I can help more people. Thanks for the support and welcome to the channel!
@RN-SM-SSBN04 Жыл бұрын
great vid. you can mig braze. needs pure argon same at tig. also teflon liner sleeve in the mig and a special drive wheel and of course the wire braze. it works very well.
@wayofthewrench Жыл бұрын
Cool, good tip! We don't do a lot of brazing and don't have that equipment so we stick with gas brazing. Thanks for the watch and the suggestion!
@DanielWainscott5 ай бұрын
Amazing explanation!
@wayofthewrench5 ай бұрын
Sweet! I'm glad you enjoyed the video and my teaching style. If you deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. Thanks for the watch and welcome to the channel! Cheers!
@tomsexton4880 Жыл бұрын
Thank you for the very professional lesson teach
@wayofthewrench Жыл бұрын
Thanks Tom! I do try to make all of my videos like this, so if you enjoyed this one....you should check out more! Thanks for the support for the channel, I appreciate it! Cheers!
@mntnman49 Жыл бұрын
Thank you for the informative video. As the desgnated brass man in a welding shop I could identify with the process but Ilearned something new. I brazed a lot of cast iron, a little trickier. Grest vid, will watch you others even though I'm retiered now.
@wayofthewrench Жыл бұрын
Thanks Terry! That means a lot to hear that from someone experienced in brazing! I haven't done a lot of cast repairs but I know that it helps to have it preheated. Any other tips? Thanks for the watch! Enjoy your retirement!
@jamespoissotsr.4266 Жыл бұрын
i know this is a old video I love your teaching your good I will watch the new videos now
@wayofthewrench Жыл бұрын
Glad you like them! Hopefully I earned your subscription today. If you deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. Thanks for the watch and welcome to the channel!
@sayadariyoutube6 ай бұрын
Worth to see this video. Nice man.
@wayofthewrench6 ай бұрын
Awesome, glad you loved the video and my teaching style! If you deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. Thanks for the watch and welcome to the channel! Cheers!
@jimmyhuffman68022 жыл бұрын
Awesome flame sounds on the video.
@wayofthewrench2 жыл бұрын
lol, tried to get good sound and audio on my videos. Glad you liked them. Thanks for the watch!
@jamesleo22992 жыл бұрын
Thanks I love brazing been welding since a kid only regret is never learned aluminum
@wayofthewrench2 жыл бұрын
No worries! Yeah me too, lots of steel welding and a bunch of gas welding but just a touch of aluminum tig welding. You're never too old to learn a new skill though! Cheers!
@Trevkongable Жыл бұрын
Great Video and Channel. I will be subscribing and showing my students this video, thanks so much for it!
@wayofthewrench Жыл бұрын
Thank you very much! What/where do you teach? Glad you were able to find the channel. Thanks for the watch and the sub!
@Trevkongable Жыл бұрын
@@wayofthewrench I teach the Industrial Technology at a small rural high school and middle school in Iowa. I do the woodworking, carpentry, basic machining, welding, and robotics. Thanks again for the great video.
@wayofthewrench Жыл бұрын
Cool, you're like me then and teach basically everything cool! You should totally build a virtual pinball cabinet! If you haven't seen my series yet, you should check it out...maybe a class project??
@Trevkongable Жыл бұрын
@@wayofthewrench sounds good, I’ll check that out, thank you sir!
@1212CRMDАй бұрын
Thanks a lot! From Brazil.
@wayofthewrenchАй бұрын
You are welcome! Cheers from Canada! Welcome to the channel!
@xjr1300extra2 жыл бұрын
so many usefull tips - 5 star tutorial
@wayofthewrench2 жыл бұрын
Thanks Bruh, glad you liked it! I aims to please. Tell your friends about my 5 star channel!!!
@slicedbread9003 Жыл бұрын
The pressure applied to the weld sample by the car tire was the same as the pressure in tyre. Probably somewhere around 35psi.
@wayofthewrench Жыл бұрын
While I agree that it is not supplying 4,000 lbs, it's applying more than 35 psi. It is more of a dramatic example of how strong brazing can be. When compared to fusion welding, it is nowhere near as strong but can be really strong. Thanks for the watch!
@armandhammer9617 Жыл бұрын
40 yrs ago in shop class we had to take a 4" square piece of 20 gauge sheet metal and another piece of curved set on top at 90° and braze them together. Very difficult for a beginner but it also taught us about too much heat as you would blow right through the sheet metal if you weren't careful.
@wayofthewrench Жыл бұрын
Awesome skills that last a lifetime! You end up in the trades? Thanks for the watch!!
@armandhammer9617 Жыл бұрын
@@wayofthewrench yes I did actually, I've been a carpenter for 40 yrs and still going strong.
@wayofthewrench Жыл бұрын
Good on ya! I figured as much with your handle....I'm a Tool & Die Machinist by trade and then I got tired of making money so I became a teacher....lol. Cheers!
@morgansword Жыл бұрын
Hoped that you would also show the old timers way of welding a fender or other thin metal and some number nine wire ..... seen a lot of older cars welded up with the fender looking together but sad... some are kind of nice but over time crack out from stress. I myself have made do in the field to get a rig to the shop to do it right... made some patches I hoped no one seen before I cut it out and redone the project
@wayofthewrench Жыл бұрын
No sad fender welding in this video but there is a cool copper leaf project video if you're interested....it's one of my favorite videos. Thanks for the watch!
@clintfulford8103 Жыл бұрын
Thanks for a highly informative and entertaining video very detailed and useful, clearly you are a gifted teacher!! Subscribed 👍😀
@wayofthewrench Жыл бұрын
Awesome, thank you! Glad you like the content and my teaching style. Thanks for the watch and the sub! If you deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. Cheers and welcome to the channel!
@itzcaseykc Жыл бұрын
@@wayofthewrench I also believe that how we do our work, even on the basest level, should be done with care, because it will affect whatever comes after in the process. I'm a new subscriber to your channel now, my friend.
@wayofthewrench Жыл бұрын
Ya gotta try your hardest at everything you do.....that way when you are a husband or a Dad, you'll be great one! Thanks for the sub dude!
@DhanushkaDilan-f4y9 ай бұрын
Very good video i learn more things in this video because i'm bignner
@wayofthewrench9 ай бұрын
Awesome, glad you enjoyed the video and got something out of it! If you deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. Thanks for the watch and welcome to the channel!
@nate2838 Жыл бұрын
Excellent explanation and demonstration. Thank you for taking the time to make this for us that are learning brazing. Definitely subscribing and sharing :)
@wayofthewrench Жыл бұрын
Thanks dude! Welcome to the channel, there's a ton of content to edutain yourself. Thanks for the sub and the share on your social media, it is much appreciated. Cheers!
@martinw94252 жыл бұрын
You are a fantastic teacher, i ve really learned something here, cant wait to put it in practice....Thank you!!!😀
@wayofthewrench2 жыл бұрын
Thank you very much Martin, I work very hard on these videos so its always nice to hear back from viewers. If you deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. Cheers!
@tonyp96098 ай бұрын
Thank you for the video. Many moons ago I would steal my mothers cloths hangers because they were brass. Next was to purchase the powdered flux to flux the hanger and I could Braze. We used it for autobody repair patching and fabricating. If you had a set of cutting torches, and a braze tip, you could braze. Thank You
@wayofthewrench8 ай бұрын
Lol, that's awesome.....your poor Mom. Yeah it's a dying tradition these days but I feel it's a great learning opportunity for my students and still has valuable use even today. Thanks for the watch and welcome to the channel!
@obfuscated3090 Жыл бұрын
A Shade 3 face shield works fine over glasses and ventilates far better than goggles which I promptly trash if they show up in an auction lot. (For those using the hard-to-find real cobalt glass lenses etc a Fibre-Metal Pipeliner helmet is super lightweight and very comfortable vs. goggles pressing on yer temples while not venting.) Brazing is excellent for joining dissimilar metals (brazing carbide tips to lathe tools) and for shock-resistant assemblies like the old steel rule dies (think big sharp cookie cutter forced by a very stout mechanical press) for cutting fabric. I used to repair cutting dies and the parent steel often failed before the braze. They were brazed so we could melt the old braze, straighten or replace the affected section then braze it back in quickly returning the die to service. MIG brazing (using argon as shielding gas) is increasingly common for auto body repair and would have for a good video since so few welders know about it. Bonus, if you have an OA torch for brazing you can gas weld with it too. This edition (if you like dead tree versions buy none later than 1939, they're cheap online) is from the glory days of OA welding and brazing. OA is actually the most versatile process and noobs should not fear it. OA welds, brazes, solders, cuts, heats heavy stock for torch bending, gouges and more: ia804708.us.archive.org/28/items/in.ernet.dli.2015.206092/2015.206092.The-Oxwelders.pdf
@wayofthewrench Жыл бұрын
Funny enough, I only put out the green face shields for my students so they don't have sparks hit their faces too. I think I filmed with the goggles because the face shield muffled my voice. They are pretty cheap, like 4 bucks on sale. Yeah there's lots of cool stuff to use brazing for and I personally love teaching it to my students. Thanks for all the cool info. Thanks for the watch!
@jdm444562 жыл бұрын
Thanks 👍 .. great go to video for my very first novice propane homecraft weld, .. modify the lid on my stainless steel flask …
@wayofthewrench2 жыл бұрын
Cheers Jackie, glad you liked the video! I would love to see your project and how it turned out, just dm me on instagram. If you deem me worthy, I'd really appreciate a share out on your social media so I can help more people. Thanks for the watch!
@c-note41462 жыл бұрын
I have a couple of questions and a comment. But before addressing those, I’d like it to be understood that I realize this was uploaded over a year ago and it’s quite alright if I receive no response. 1. At 18:35, there was mention of the indicator of knowing when to introduce the rod being the color of the base metal. This brings up a number of questions: 1A. Were shaded eye protection being used? 1B. What approximate kelvin and lux was the ambient light? 1C. What to do if someone happened to suffer from colorblindness? The comment: As I understand it, the audience receiving the information can sometimes absorb the info presented very well and other times not so much, depending on how the information was presented. My brain happened to have absorbed this information very well, and I very much enjoyed the ways it was presented. Thank you
@wayofthewrench2 жыл бұрын
Yes tinted green face shield was used during this braze and the camera has a tinted lens on it so you could see better as well. The ambient light in the room was standard lighting for a work shop as it was tested for standards when they did the led conversion for the shop lights but I'm not sure now what the lumens actually are. The indicator of proper heat in steel is a faint red glow from the steel. If someone has colorblindness, I would suggest that the area would look like a lighter shade than the surrounding cooler metal. I am assuming that as I don't personally have colorblindness though. Thanks for the questions and the watch, cheers!
@c-note41462 жыл бұрын
@@wayofthewrench this info, that you freely share, is priceless. And I thank you very much. I look forward to more videos and more learning. Subscribed
@wayofthewrench2 жыл бұрын
I appreciate your kind words and the sub, cheers C-Note!
@stevewatkins12212 жыл бұрын
Awesome video, very informative. Great presentation style. Thanks so much
@wayofthewrench2 жыл бұрын
Thanks dude, you would love the brazed copper leaf sculpture video then! You should check it out and if you liked my teaching style, you'll enjoy my other videos too! Thanks for the watch!
@MOAONAABE Жыл бұрын
i used to weld band saw blades on a resistance welder. thats a different animal. in production, one at a time. grinding the flashing off is an art. BOING!
@wayofthewrench Жыл бұрын
I used to weld our bandsaw blades in our old steel fab shop too! Yes, it is an art form. Trying to grind the right amount of tooth and then grinding it flush without making it weaker. Thanks for the watch!
@leonardpearlman4017 Жыл бұрын
@@wayofthewrench You can silver-solder bandsaw blades! I've taught students to do it.
@wayofthewrench10 ай бұрын
Never done that one. Neat!
@christophergoodwin-qo7tg Жыл бұрын
Excellent teacher
@wayofthewrench Жыл бұрын
Thank you very much for your kind words! I try very hard to make the very best videos I can so it's always nice to hear from subscribers. If you deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. Thanks for the watch and welcome to the channel!
@kadenread58084 жыл бұрын
AMAZING VIDEO ! VERY SIMPLE , easy to follow ! And interesting👍
@wayofthewrench4 жыл бұрын
Thanks bruh!
@lutheraalleyne88793 жыл бұрын
Educational
@greggjohnson76672 жыл бұрын
Ive never seen anybody that could braze worth a damn...until I saw this video. Thanks!
@wayofthewrench2 жыл бұрын
LOL, thanks Gregg! If you deem me worthy, I'd really appreciate it if you could share my channel on your social media so I can help more people. Thanks for the watch!
@willbales921511 ай бұрын
This was a great video.
@wayofthewrench11 ай бұрын
Thank you very much! I'm glad you enjoyed the video and my teaching style. If you deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. Thanks for the watch and welcome to the channel! Cheers!