WDW Axial Capra Winch Mount! New Release!!!

[@Teasuti]

So 10 people here would have been interested in the last 4 months. Is that not enough interest to get an another batch made?

[@jeffro7p202]

Are you still selling these? I dont see them on the website.

[@Jackst54]

Logan, do you still offer this winch mount? It shows an error when pulling up that link. Thanks

[@thatoneguyyouthought]

Not at all what I set out looking for but is now absolutely being added to my part list. I was looking at 3Dprinted ones but this is so much nicer.

[@genenelson5781]

I got mine Saturday, installed Sunday. Easy install, great fit. Great product. Thank you Logan.

[@EXPIOWA]

I just placed my order. It said there were 2 black ones available. Now there should be only one. If you want the last one for Christmas don’t wait. 😉 I plan on entering mine in some indoor competitions this winter so this is required equipment. Thank you for making these available.

[@donniehunter309]

Damn cool to see a suck down winch in an RC. Another great product Logan. Thanks!

[@westdesertwheeler]

Thank you!

[@s1096cm2]

DUDE!!! i was actually trying to figure out how to install a servo as a winch in my car this last week. Today this is in my recommend videos... first time I was happy my phone was listening in!. This is fantastic! got a Black one on its way. You Da Man.. Man Thank You

[@westdesertwheeler]

Already packaged up, thank you for the support!

[@s1096cm2]

@@westdesertwheeler Already got it, installed it, and loving it. Thanks so much for making this happen it's fantastic!

[@qrisemrc]

It will be easy to install inside the rc car using the winch mount. It's a cool device.👍👍👍

[@timothystruven8629]

Definitely gunna order one of these once I get up to Utah next few days

[@Pinpinz2005]

When will you ship to Canada???

[@liv2plagomoto910]

Hi Logan, Looks like this has been discontinued? I don't see it on your site. I'd love one if it's still available. Thanks

[@brettwallick4885]

I need to get the mount for the axle for my Capra based c3 for a suck down winch

[@chokecherry_rc]

thanks bro i just ordered one, i’m coming to sand hollow in september and i can’t wait

[@westdesertwheeler]

Thanks so much for the support

[@CAPRAQUEENRC]

I have that in my RYFT with the prototype 1Tenth RC front wing mount and RC4WD 1/8 winch. I also have a RYFT with a RC4WD 8274 front winch

[@Gibsonlife573]

Great job proud of you

[@robgoffroad]

I must have this! :) Great job!

[@westdesertwheeler]

Thank you Rob!

[@zip2692]

Got mine installed today & programed to my remote. Awesome. Thanks W.D.W.

[@Dr.Thermite]

Thank you.

[@TodWulff]

Just ordered mine. Pretty geeked to get it in hand and installed. I have a question on implementation. On the top of the servo bracket, what about putting a really small pulley and then have the fair lead ran through the pulley and out the grill with a hook large enough to prevent it getting sucked into the hole. that way the winch should be usable both as recovery and also for body suckdown. Seem reasonable?

[@Teasuti]

So every time you winch the car, the axle would get sucked down indiscriminately too.

[@knusperpiti1015]

Hey Logan, i would like to order one to Europe but cannot select a shipping method.

[@shaynejenkins446]

That's freakin rad dude.

[@westdesertwheeler]

Thanks, yours is packaged up 👍

[@shaynejenkins446]

@@westdesertwheeler Just installed it. Went in super easy. Using it as a suck down winch is gonna make some lines more interesting. Such a great idea. Now I have 2 WDW Capras lol.

[@chrisgaumer9551]

Logan are you still making the micro service winch mount?

[@braydenfrench8569]

So what about the cms kit from you? I think i might be able to come up with something to work…. Lmk what your thoughts are.

[@mikeearls8158]

This is amazing!! I’ll be ordering!

[@westdesertwheeler]

Thank you!

[@TheAmericanUhate]

I only use nsdrc servos and the micro's just have a single center hole on each side instead of 2 on each side. Is there enough room on that add a 3rd hole in the center of the other 2 holes? Just to make it more universal

[@westdesertwheeler]

The reefs mount in the center same as NSD. It will fit and work.

[@reddirtrccrawlers]

Just curious if there is any issue with the winch line sawing through the plastic of the cage with repeated use? If so adding metal shielding that bolts over the plastic would be a great additional part for longevity

[@westdesertwheeler]

No evidence yet. Sure it could be possible but it would take a ton of use to even leave a mark

[@mosslager]

Will that also work with a RC4WD winch as the mount...I know it would be tucked away but then you could use the RC4WD remote setup with a stock radio

[@westdesertwheeler]

This will fit micro servos

[@beauvrt]

That's awesome!

[@gillyboyNY]

Hi wdw, I’m about to order the Capra Micro Winch Mount kit with the reefs servo. The website doesn’t itemize the kit. I just want to make sure it comes with the stainless steel suckdown bracket. Also, does the tow hook 🪝 come with it?

[@westdesertwheeler]

Yes it comes with the stainless servo bracket and winch hook 👍

[@BENJAMIN_BANS1776]

Do you know of any axels that aren’t crazy expensive? Cause I need some for my Trx4 because I’m making it into a crawler and I need wider axels but I can’t find any that aren’t expensive.

[@silverbulletJKU]

Will the suck down winch piece be released?

[@jdpatrick7359]

Are you still selling, not on web site.

[@christophervallindras3199]

Where can you order this kit cause it’s not on the website

[@Love2Wander]

Cool product and the price is good.

[@westdesertwheeler]

Thank you

[@chainsaw7887]

So you're saying I need another Capra to install this in🤔

[@westdesertwheeler]

I had to lol

[@rcrobertcurrie]

No Canadian Shipping?

[@gillyboyNY]

I use a zen 4200 mah battery that takes up the battery tray. Do you think it will clear it?

[@josephdesilva9400]

Mine went in but with some patience lol the fire wall is adjustable so I moved it back for more clearance

[@jessemiles5856]

Will this work with the Chupacapra setup? Or just stock cage?

[@arunc1958]

Do you sell the servo bracket ?

[@misguided5421]

Hey Logan, what thumb steer do you use on your Flysky GT5?

[@westdesertwheeler]

A friend printed one for me not sure where it’s from

[@JJClark-lh7qo]

We're did you get the winch?

[@beekerbeeker5779]

2 questions. Does a 3600 gens ace adventure series still slide into place without removing the spool? And do you ship to Canada??

[@westdesertwheeler]

Unfortunately I don’t have a 3600 so I’m not sure. It will be tight with that big of a pack

[@SonnyManning-d5u]

Where can we oder one

[@SW23456]

International shipping?

[@riochavez665]

5:00 doggie flew away

[@TrailinAndScalin]

Will this work with the chassis mount servo kit you sell or will the two interfere with each other?

[@westdesertwheeler]

They interfere

[@brad758]

Still available?? Can't find them on the website.

[@creeperslayerdg4475]

They aren’t available I’ve looked it’s a bummer

[@richardbeckett4583]

Just ordered the kit. Wrong address is attached though 😢 i hope they email with a confirmation so i can email them. Dammit hate when that happens

[@westdesertwheeler]

I can get it fixed. Email me westdesertwheeler @ gmail .com

[@richardbeckett4583]

Sent. Thank you

[@KyleDeAngelis]

Can you still get this kit? Can’t seem to find it

[@westdesertwheeler]

Currently sold out so took it down from my site

[@Teasuti]

@@westdesertwheeler any chance of shipping to the UK when it's available?

[@shaynejenkins446]

where is the servo bracket? I'm ready to order

[@shaynejenkins446]

Nevermind I missed the part about it being a prototype. You just sold a red micro winch mount though.

[@westdesertwheeler]

The servo bracket is included. The video was shot with the prototype you will get one 👍

[@shaynejenkins446]

@@westdesertwheeler omg bro you the best.

[@mve1970]

Please start shipping to Europe 😊

[@aaronhouser3711]

Slick

[@davidbanaszak562]

I want one

[@EdgeBauer]

$110?!!! My guy…. No.

[@westdesertwheeler]

110$ includes the winch and bracket. The servo mount itself is 40$

[@zip2692]

Does the servo come with the spool

[@westdesertwheeler]

Yes, spool, line, hook included with the servo

[@CrawlerRuth]

Is the fairlead available on your site?