We borrowed a John Deere 348

[@baccoff3308]

Nice Tractor!

[@zuccaribrosfarm4443]

Thank you

[@richkramer2777]

i run a 348 . You were not feeding enough hay into it .the hay shold be just coming over the auger by the stufer fork . Pickup the hay at the outside of the pickup for an even feed and consistant bale . FEED THAT POOR BALER YOUR HURTING IT !!!

[@hanswadam2]

full power

[@hanswadam2]

kzbin.info/www/bejne/gJW3faKGjbRljKs

[@michelebeckham3474]

I've ran a 348 for 7 years after running NH for years. After you get it figured out the 348 is a great baler. As mentioned above, need to run thicker winrows or faster ground speed on the 348.

[@kennethheern4896]

That goes for both balers. Neither one are being fed enough hay. That new holland sounds like the hay dog cushions are worn out.

[@jaapbruijn1300]

That‘s what I thpught as well. I worked with those balers a lot. You can hear it on the pickup! When you feed it properly it can make a lot of bales in a very short time. And the bales are much firmer as well!

[@kopenhagenkid]

Great video good luck baling your hay

[@BALERMAN]

I’d be fired if I ever baled hay that slow for our ARCUSIN D-14.

[@Eddie_Schantz]

Great vid. This is the first time I ever saw a chemical tank on a baylor. What is up with that?

[@gustavovelazquez956]

Muy buen equipo . Para que es el tanque con liquido?.

[@SAB_Agri]

Cool vid lad Well what you think of the JD baler?? NH or JD best ?? 🤔🤔

[@zuccaribrosfarm4443]

NH is heavy duty, a lot stronger than JD. However the NH is newer by a couple years and the JD is always reliable as we had 2 before our new hollands.

[@zuccaribrosfarm4443]

I would say NH for our operation. JD still is great but we need a heavier bailer. (We like our Jd combine 9550 and 25 foot drill)

[@SAB_Agri]

@@zuccaribrosfarm4443 interesting 🤔 yes I was thinking the same too, as I’m a NH / MF man Thanks for the information 🤙🤙👍👍

[@zuccaribrosfarm4443]

Your welcome

[@edwinschwartz2472]

I have owned both a JD 336 and a NH 575 and other NH’s. I prefer NH square balers. I also prefer JD round balers, except the 410. All were purchased new except the NH 77

[@joeprewitt2539]

I cant figure for the life of me how to adjust my 348 to make straight bales. If I put the auger forks in the middle like that it will come out looking like a banana.

[@vicenzohenrique1718]

what is this tank in the back of baler ?

[@zuccaribrosfarm4443]

The tank if for the propionic hay preservative. We use this when the hay is over 13 moisture. (when the hay is wet)

[@user-gt3ip2lk6p]

Что за пропионовый состав что в него входит? Покажите как работает механизм.

[@santiagocarnicerogarces9546]

Es para humedad del heno.

[@paul1desm]

what does the liquid do to the hay?

[@bill45colt]

why did flywheel not turn smoothly

[@Iveko-lz1nx]

Джондиъра 6+

[@martinchalk6860]

Hay baler