We Flipped The 69 Charger Build Upside Down!!

Time to bring out the old rotisserie for the 69 Charger! We get a new tool from Milwaukee tool m18, a 1/2in impact is just what we needed to get this charger taken apart and on the rotisserie!!
Help support the channel buy Robby Layton T-Shirts, Hats, Patches, Stickers:
www.robbylayton.com
Subscribe: / robbylayton
No One Expected This With Ed's LJ20 Golden Nugget:
• No One Expected This W...
We Finished Ed’s LJ20 Golden Nugget!
• We Finished Ed’s LJ20 ...
Goodbye Golden Nugget... Hello '69 Dodge Charger!
• Goodbye Golden Nugget....
I Found A 100 Year Old Abandoned Tow Truck!
• I Found A 100 Year Old...
Joy Ride In Dad's Car Leaves Teen Buried To The Frame!
• Joy Ride In Dad's Car ...
Epic Barn Find Of A Lifetime, Waking Up An American Classic!
• Epic Barn Find Of A Li...
Abandoned '69 Charger... Will It Drive 1,115 Miles?
• Abandoned '69 Charger....
IT's ALIVE! The Abandon 69' Charger Runs Again
• IT's ALIVE! The Abando...
We Cut The Roof Off Matt’s Off Road Recovery Jeep
• THE BANANA GETS PEELED...
1 Frozen Skid Loader & 2 Trucks With Matt's Off Road Recovery + Trail Mater
• WE ALMOST GAVE UP! 1 F...
Shop Tour Video:
• Shop Tour & Meet The C...
Please like, subscribe, and share!
Thanks for watching, Daddy loves you.
#RobbyLayton #AutoBody #Charger #milwaukeetools #milwaukeetool #milwaukeem18

[@christopherleger9943]

I remember when you first started this channel. You said we are not a Restoration channel, lol, and look at you now. We are all so proud of you. Follow the money.

[@jamiegodwin9881]

Y’all have so much fun working on your KZbin projects after working 8-12 hours in your business body/paint shop! This is one of my favorite KZbin channels!!!

[@Pyromaniac2450]

If you move the body mount pieces of the rotisserie to the lowest hole, it will make the center of gravity of the car closer to the rotation axis and make it much less effort to turn

[@monkeybarmonkeyman]

I like the factory option, "ventilated trunk". Comes in handy like when you are under the car wanting to look through it 🙂

[@kennethfulgium2021]

Check the torsion bar mounts on the K frame and on the body for cracked mount welds .Because the welds are known to crack on them.

[@cudaman-yq7pq]

That little scrap of metal that you removed from under the data plate is the remains of a long inspection tag. The factory inspectors snipped pieces off of the tag to show that they completed their inspections as the car went down the line.

[@RobbyLayton]

That’s pretty cool to know thank you!

[@botfoblhrp]

you know we all love the boss, she keeps you guys in line😉

[@MrChrissy1r]

I just love these videos , keep up with the good work.. Since I was young, like a kid really I have a fascination for knives, good quality useful knives for outdoors fishing camping etc, and all who know me know this too. Though the only knife one can have as an everyday carry (to use your U.S vernacular)is a non locking blade of maximum 3 inches. I do of course have lots for use on non public land or places, anyhow my sister in law and then later my son went to the U.S and kindly brought me back knives one was a Buck the same as Hillbilly has there with a very small "skinning knife and my son brought me back a "commando" type knife, but oh dear,, both made in China!

[@rickshipley7872]

Robby, Bar Keepers Friend is a great abrasive compound and the grit is so "mild" you can clean polished aluminum without hurting the appearance. It has the potential to make that build tag look brand new.

[@Jim-fe2xz]

It looks like you've got to adjust your rotisserie arms up so the pivot is closer to the center mass - even if you have to flip that set of arms. Right not it's just the roof trying to balance the rest of the body. Getting closer to balanced will make life much easier (and safer). Great project and thanks for sharing!

[@jeremywolfe5483]

Hillbilly’s green screen hands has to be the most hilarious thing I’ve seen on the channel. Bravo 😂😂

[@saintracheljarodm.holy-kay2560]

Well that's interesting, did you notice how ventilated the floor pan is, nothing like a colander bottom. Lovely. Yes for some strange reason they get really excited, if you leave them at daycare. They start crying then the children have to calm the down. Have a good week and God bless amen.

[@AFloridaSon]

Wait! You can't blame Ernie for not maintaining the rotisserie when y'all were the last ones to use it. 😂

[@mattmunds5973]

And he left it out side how could he lol

[@RobbyLayton]

It’s just too easy to expertly blame him

[@kdgckg]

Can’t wait to see Whiskers on a rotisserie…😂😂😂😂😂

[@reddog543211]

Always a great way to start a Sunday morning....with the Layton crew !!!..... great video....cam shots at a premium along with editing !!..... excellent content as well.....I miss Dinner !!

[@hustlinghard8081]

"Why don't we crawl under there with a flashlight to make sure we aren't gonna mess sh..stuff up?" Nice catch Hillbilly 😅😅😅

[@jodywells7519]

You seriously need a bolt bin supplier! Great work guys !

[@RobbyLayton]

I agree

[@danfay4860]

We use kimball Midwest very high quality stuff made in the good old 🇺🇸

[@ronbrown3552]

LOVE THE MAGIC, FLOATING WELDING... disregarding the "GHOST" hand employed!! Creativity in YouTubing is a PLUS...

[@brucea822]

A bronze sleeve bushing inside the stationary bore “grooved” So you could grease it whenever you needed would be the ticket for that challenge(r)

[@boh348]

I have a nice 1949 IH tr11 truck that needs a home. Compete truck and complete extra chassis with drivetrain and extra engine. has hyd pto set up on the truck. would make a great rollback truck. I am too busted up to do anything with it these days. It is old school with butterfly hood. Pretty cool. Build you own Merlin or Matts heavy truck. Super clean. New Mexico. Love the videos. maybe more people will understand how much work is in building stuff.

[@traedownard]

Hillbilly is very respectful! My guy caught him self cussin and saved it! That’s awesome man

[@BFVgnr]

Buck 110 is a solid knife. And Buck has one of the best warranty programs in the world, because they'll fix/repair/replace all their stuff.

[@jackman6256]

Looks like lots of work for Paul to rebuild exhausted

[@wi.dave3812]

Having attended public school and taken freshman English twice 😂 I can honestly say rotisserate is the correct terminology for spinning the car around on a rotisserie. Great video!

[@rdbrnr86gt]

That opener on the rotisserie and Hillbilly taking a ride. Yup. Been there as a Ford 351w long block took me for a ride on an engine stand years ago. Don't ask about my landing on the oxy-acetylene tanks. This whole place is the kind of extended family that would be a dream to spend the day "working" with. Seems like the kind of place I'd work my hardest for as well. Extra fist bump to Hillbilly here, simply because he's a great guy and always makes for some great content on here. Thinking back to 25 years ago, I'd spend hours at "work" unpaid doing things with my coworkers and superiors. This just brings me back to those times. I wasn't being used as free labor or anything, we were bonding and having fun over something we all enjoyed (games).

[@mikebanks5480]

I love that impact they work on anything that will move, that's been my experience with the upgraded monster battery!

[@joeshmoe1436]

I feel ya hillbilly , I didn't learn to read til later in life , I obviously didn't make it thru school & landed myself in jail locked in a cell loosing my mind & end learning how to read by just sitting & trying to sound out the word s and trying to read books , U could probably find an app on ur phone that would help , u should make it a goal for 23 brother , I promise u it'll change ur life & see the world in a different light literally,

[@taurota1554]

Awesome content as always.Thanks for sharing and taking us along

[@juliagoodhope420]

We sure enjoy watching you take apart the charger. Your eye for detail and we appreciate all your explaining! You are a very smart young man!

[@SchysCraftCo.]

It's coming along nicely guys. Can't wait to see more videos soon. Keep up the great craftsmanship and hard work my friends. Fab On. Weld On. Keep making. God Bless.

[@jessealvarado6939]

Goodmorning yall, I hope everyone has a wonderful day filled with love. Lol Eminem skit and the welding bit was funny. Thanks for the laughs first thing before work. See ya next time brothers and siesta👊🙏😎

[@patrickb5656]

Loved the green screen welding. You couldn't see the hand at all! It's magic!

[@sandyposey8074]

Absolutely love your video's! Not only do you get lots of work done, you have fun and make me laugh!

[@bmooch1]

I'm genuinely excited to watch this build through

[@grannalyn9210]

OMGAHHHH RONCO THROWBACK love it!

[@dps67]

Milwaukee tools rule!! Thanks for not bowing down too harbor freight junk tools like everyone else is doing.

[@nicoledodds7182]

The photoshop of Ed & the nugget on a rotisserie SENT ME 😂😂😂😂😂😂😂😂

[@UnfinishedProjectDartSport]

Robby, it’s hard to describe how much I appreciate you restoring my 69 charger. I know it’s in great hands, let me know when it’s ready. 1M!!

[@RobbyLayton]

No problem it will be a bit but I will let you know when it’s done

[@arteepee]

That trunk floor is NOT going to survive sand blasting!! :-) Love the channel!

[@marklengal9990]

Media blast if you have the option in you area. Sand is too harsh in my opinion and it can also warp the roof and 1/4 panels.

[@kimetherington2252]

She's just a shell of what she used to be, a stripped out charger on Robby's rotisserie! She'll spin and spin and spin again, until Robby makes this classic new again! With all the skill, and all the care, this old beauty will be in someone else's lair! With the kindness of his heart, he will part with the art of his own creation! Til next time take care and stay safe...

[@Grenyas]

10:45 It's like watching Predator weld lol

[@RobbyLayton]

He’s good at it

[@davidballoid2118]

Such a large car, it's crazy to see that something that large it didn't actually have a full frame under it. Hollywood did some real tricks to be able to put those types of cars threw a beating.

[@miked19831988]

Robbie here in Ohio there is a liquid chemical dip. They put the car in a tank and takes ALL rust and paint off. Will not warp panels. Soda blasting is another option. Just suggestions not knowing what is available to you out there. Really love your videos. Addicting they are LOL ha ha

[@pat8988]

I was going to ask him why sandblast instead of chem dip.

[@ruger8412]

Kansas to Utah is like a 1/18th drive across the country 😆 🤣 😂 Robby's perberveal 18ft lake trout!

[@jacoley]

Build a small chain crank using your drill to rotate your rotisserie.

[@danrussell3439]

Your videos are entertaining and informative thanks for posting.

[@xxlxpman]

I bet I've had my Milwaukee M18 1/2 inch impact for 7 or 8 years, its a fine tool and the most impressive part is the M18 red lithium batteries are still in perfect shape. Thats all I buy, Milwaukee rocks!!!

[@hustlinghard8081]

Would love to see a toolbox tour video.

[@bobtucker8875]

Very cool car can't wait to see it finished 😊.

[@justindorado8152]

keep up the great work robby

[@joshshelton796]

Awesome video guys!

[@leifsoderman5065]

Keep on rolling and rock and roll

[@trakyboy5128]

That " welding it's self " Seg was a HOOT 🤣 !!

[@peterjewell9436]

Hey guys its coming along nicely looks pretty solid but we'll all see what its hiding when it gets back could watch these all day long i think i know whats coming after watching another channel but wont say to spoil it keep up the good work cant wait for the video 👍👍👍

[@jasonstrout4502]

Matt's Suzuki Samurai it's kinda a Geo Metro.

[@Mrintelligent2025]

I love all your videos 📹 ❤ thanks for sharing .

[@waltervarcoe8354]

Great stuff guys.

[@hotflashfoto]

Even if you take everything out of the car, you'll never have all of the nuts out of it, because you guys are still there. LOL I like watching an old rust bucket like this getting taken apart and then restored to better-than-new.

[@psg6314]

Looking like your going to need a another storage trailer for the 69 great video keep up the good work God bless from GA and stay

[@darrengeorge2308]

Thanks mate been waiting on the charger gives me inspiration I’ve found me self a barn find 30 yrs sat in a shed trying to hear the 360 run painful so far😂 over here my Chrysler by Chrysler CH coupe is one of only 480 cars made number 93 off the line and one of 380 v8s and around 80 known left I also have 2 valiant chargers 1971 Australian cars so thank you keep the awesome content come if oh also a jeep guy 😂🇦🇺👍

[@marvindebot3264]

You have a multicar gold mine there, Chargers are just crazy expensive now, they make XB coupes look cheap! I haven't seen a Chrysler by Chrysler since I was 18 or so (mate had one).

[@RobbyLayton]

Wow that’s awesome!!

[@marvindebot3264]

@@RobbyLayton The Aussie Charger is a different car but same style and just as iconic.

[@wendellharker6690]

The Milwaukee 1/2 inch guns are grat. Like the video keep them coming.

[@brianhaygood183]

He. The green gloves stuff was funny. If you mount the camera on a tripod and use a blank still as the background it will look basically perfect.

[@RobbyLayton]

We are armatures and thought it would be funnier this way

[@brianhaygood183]

@@RobbyLayton Did sort of look like a ghost!

[@fishingboats7197]

For all the trips to the hardware store for some bolts you should get a bolt bin in the shop or even put it out in your shipping container if no room in shop .

[@MrSparks54]

at 13:19 Robby looks like Gomer Pyle 😂Good stuff guys, cheers from West Jordan

[@MikeBaxterABC]

17:29 Demri! Love the look with your hair all straight! :) .. My wife (rip) used to have a hair salon in our house and I helped out a lot, I still do colour for the girls sometimes :)

[@ruger8412]

16:14 Robby almost stabbed Hillbilly in the face!

[@larryhall6416]

Now becareful with my Charger. I hope you might get a hold Grave Yard Cars . They do fantastic rebuilds of old Mopars. He has a lot of connections for parts

[@BigHeinen]

You may need to weld in the torque boxes to strengthen the frame/suspension connection. But you already knew that, right?

[@fhgaylor]

Can’t wait for you to work on the C3 Vette. Remember, it’s only original once and that’s a rare color combination.

[@archieletsyouknow5508]

💯 Albuquerque New Mexico support is in the house

[@davidcolesr.8628]

Good to see you

[@garychaiken808]

Good job as usual. 😊

[@Mcgiever100]

Might pick up a center drill bit for starting holes. 5/16 would be all around size. The tip is 1/8. They last a long time.

[@allentinnell4497]

You should buy a dustless blasting mobile unit and do all your blasting in house I think it would be a great investment for what you do

[@ruger8412]

Actually older automotive paint was actually better quality but the EPA didn't like how toxic it was before it dried. So now we get PPG but I like the older Sikkens /AkzoNobel, stuff.

[@mridaho7871]

Great job getting the self welding done. I must not pick the right thickness of metal, cause mine never welds itself.

[@goatskullrebellion4800]

Great job!! 🤘

[@detroitdiy]

Missing some Dinner in the last few video's. He has made a cameo here and there but mostly absent. Great video guy's.

[@davestark2015]

Yeah. Why

[@Mgb-js7gc]

WD detailing sent me love the video

[@f87115]

I like the math thinking insert, that is exactly me doing math 😂

[@kamazoza]

i love the green tape!

[@skipvanauken6816]

FYI guys, when you go to put the Charger back together, put the rearend in first, mount the drive train in the K member and push the assembly in from the bottom or drop the body down over it.

[@jonjanetzki7102]

Love to see you touch base with Mark Worman during this build!

[@jacobthornock317]

😆 the green gloves.

[@aarone3790]

Awesome video

[@vangoodwin7335]

I am not trying to be a jerk and I do appreciate your body shop videos, recoveries and demolition derby as well as FAMILY. If I had one wish for you folks it would be that you don't branch out into too much. Chip Foose is a great designer and car builder but the cars his show built in a week pale in comparison to what you did on Ed's jeep and Aiden's pickup. Truth be told, what you call "perfectionism" is exactly what many of us look for especially on autos. This charger will be Beautiful and better built then any others "showcased" on TV shows. More of your shop work and getting car repair or restorations would be greatly appreciated as well as maybe some follow up a year after the build. I do not believe you will find many "overhaulin" cars still on the road or in the owners possession. I know restoring any car isn't cheap or easy. Ed, Matt and Aiden are eternally grateful as are those of us that watched all of your hard work. The recipient of this Charger will be also, knowing the time spent with quality materials will out last most modern autos. We lost comedians Ralphie May and John Pinette too early due to weight, PLEASE pass on my prayers and encouragement to Dinner. I'll love seeing the joyful young Man lighter and healthier for many years to come. My Lady wanted the trailer we pull behind her motorcycle to be painted to match. I didn't do anywhere near as good as you but she's really happy with the matching helmets also. If an old biker can appreciate that, imagine how I and others feel when we see what you folks do with the vehicles in your shop. I appreciate your hard work and outstanding results. You all are in my prayers Hoka Hey

[@mattdonley9912]

Love the content guys all the way from Northern maine

[@RobbyLayton]

Thank you

[@jameskappel]

that was some funny horsing around

[@johnfarmer2047]

You guys seem to be doing a great job on my Charger. Keep up the good work. P.S. I want the Charger.

[@martysmilt]

Nothing but Milwaukee for over 45 years! If it's 1/2" or less even if it's WELDED in, twist it off instantly! Then drill it out.

[@thehollics7067]

The Oscar Winning special effects were hilarious!

[@RMonkey]

You may already know, but you should take the tension off of the torsion bars before removing them. that way everyone keeps their fingers, arms and lives the way they were before busting those things loose.

[@RobbyLayton]

Yes we know that and removed the bolts first

[@gregsullivan8956]

@@RobbyLayton good job Robby

[@RMonkey]

@@RobbyLayton are you talking about the bolts at the middle of the car that put pressure on the torsion bars? the bars may have been stuck, They shouldn't have popped out the way they did. That doesn't matter. what matters is you're all safe. Thanks for the your teams awesomeness.

[@bbay1977]

WD sent me and I cant wait to see the Corvette and older Chevy on this channel.

[@RobbyLayton]

Thanks for watching!!!

[@christiedovale7827]

wish I knew you growing up and btw love your humor

[@aaahtex902]

**GOTTA HAND IT TO ROBBY, YOU AREN'T A COMPLETE AUTO SHOP WITHOUT A VIABLE >>>>>AUTO ROTISSERIE

[@docink6175]

wah wah wah I have to use a ratchet wrench... A ratchet box wrench would have been a blessing in my tool box

[@tonytrumble]

Hillbilly you're getting even funnier! How is that possible lol we know Robbie is a great comedian

[@jamesherman9925]

Can't wait to see the Corvette and the 50's Chevy.

[@morrislabrie6933]

That charger going to look so beautiful when your done. And say hi to your beautiful family and friends I watch u guy every morning and fab rats and Matt's u guys r awesome people

[@duanesnider1383]

It welded itself it’s magic😎🙀

[@f87115]

Invisible weld 😂y’all are awesome

[@jimmyjenkins9240]

Hillbilly is the best!

[@johnkranz4004]

Looking good Robby and Hillbilly