We Found Some Amazing BUDGET Upgrades For Our Foxbody Mustang!

[@xziang]

2:25 mark looked like you walked right by a lincoln mark VIII those fans are highly sought after due to the cfm they flow.

[@Neomustangs]

Ya i noticed it after the fact right lol! There eye candy everywhere i was actually looking for a mystique/contour that had dual fans.

[@puzzlefox5.076]

Picking is fun, wish I could go with you! I'll have to start doing that around here!

[@blakefuller3400]

Love junk yard pickin

[@matthewkoenig5133]

That crazy part I can get the gt40 top ends off those for like 80 dollars lol and the hole motor for 150 all day at my junk yard I go to but nobody here in Amarillo works on them

[@Neomustangs]

Ya id perfer the whole motor but thats a big process there. Not easy.

[@matthewkoenig5133]

I wish more people here worked on these but everyone into the ls stuff so I'm the odd ball here but that's ok I always have been

[@ozielcantu1766]

Nice video bro 👍🏼

[@PaulDaFox]

Some great picks there! I would have been all over that 95 Vert 🤣 Btw that yard is really organized. I like how every vehicle was up on rims👍🏼👍🏼

[@slowbra94]

Are they not all up on wheels at the yards near you? I never even noticed it cause its what I've always seen

[@PaulDaFox]

@@slowbra94 No brother, nothing like that near me! Usually when they get picked at there just lying flat on the ground which is a pain in the azz. Have a great night 👊🏼🏁

[@johnelliott7375]

Good morning to you and I hope that you have a great day today.

[@JeffBurdzinski]

I always snag the engine oil coolers too on the V8 Explorer/Mountaineer, but have yet to try installing them in an Fox/SN95 to see if there is room....

[@allenlorenz6383]

There is definitely gold in those yards. That's why I like going to.

[@brucefrye8799]

Hell yah I love going to the bone yard. I made my first paycheck working in the yard as a teenager. Learned a lot about working on cars there

[@lloydgreen4091]

Thanks for Weathering the fricken Cold for Us Showing US Noobs the parts to go after. tussion ain't doin' this much anymore, so we really rely on you more, Especially with All your Knowledge of what Will & Will Not fit. Big Thank You.

[@Neomustangs]

Thanks for watching man!

[@Staytuned405]

snag those taurus rear calipers to package with the brembo ats fronts!

[@Neomustangs]

Good one !

[@shawngoff8290]

Me and wife was at the junkyard today!! Scored another Non egr upper and lower intakes 50 bucks and great memories with the wifey

[@Neomustangs]

Hell ya !

[@tracyamcneal9597]

Appreciate the video Dannie. I picked up some valuable information from this video. I would also like to thank you for the quick response to my recent email that I sent you inquiring about brake conversions. I will not hesitate to contact you regarding Fox body upgrades etc. Thanks

[@coldstne1]

Awesome stuff, I was at my local yard yesterday and took parts (and pics) of a 90 notchback! It was rotted from the bumper all the way through to the gas tank, and was already picked clean by the time we got there! I only wish I could upload the pics I took to share with you guys, now I regret not filming a vid of it… There were a bunch of 99-04 verts and coupes though, I was able to score a nice set of spindles to finish the 5lug swap on my fox. I even scored some torsion bars that hold the trunk open from that stripper notch, mine was missing one of ‘em. I’m happy…for now! Thx for sharing! FT

[@Neomustangs]

Damn!

[@frank3stangs]

Nice!!

[@Neomustangs]

Thanks!

[@w-o-l-f6674]

These are the videos that have been helping me out the most. I get my pen and paper and take notes. New to the game so doing my homework with you during these junkyard pulls have been much needed education. Thank you for the coverage on certain parts from various vehicles to get these foxbodys back on the road.

[@Neomustangs]

HELL ya man thats why i do this. Its an easy video that has tons of info and engagement for the viewers. Vs just standing there talking i feel like i do the most lol!

[@w-o-l-f6674]

There are a few of you guys that I follow on a somewhat daily basis to gather up as much knowledge as I can so that when the money is right or tight, I can still push forward and not grow stagnant in the build. Again, first build ever with my 91, I had no idea really what I was getting myself into. My cousin pushed me into buying a roller and from there it's been collecting info. Thanks a freaking ton. Keep up the live streams and junkyard pulls please. They have been a fountain of wealth in knowledge.

[@automotiveaddiction428]

Does the Lincoln or cougar or crown vics have good mustang swap over parts ?..like intakes heads or breaks systems or other suspention components.mabe even fuel tanks ?.always here about the explorer and sn95 but I never here of people using parts from other ford /mercury cars.

[@Neomustangs]

Not really

[@reloaded1880]

Junkyard videos are always good to watch. Love going to the Junkyard

[@Neomustangs]

TY!

[@paulhudgins5120]

Nice on parts find, that's a really organized junkyard, keep up with how to for parts finding.

[@TooBrokeToWheel]

83-92 on driver side axles is my understanding, not those newer ones in that yard

[@autofox5.067]

That yellow mustang must have been the haunted house edition! Love the junkyard videos I would love to go to a u pick it yard myself.

[@TS-jp1lm]

Junkyard picking always makes a great video!!

[@Neomustangs]

Ty

[@baconcreek609]

#Junkyardadventures are one of my favorite activities too

[@williamrose8944]

Did the same when I was younger

[@matthewpeterson4305]

I live in north eastern Ohio, you wouldn't happen to have any 94-95 mustang spindles would you?

[@BA-pz3lo]

what are good parts for building a factory five mark 4 roadster

[@awee5816]

Hey does anyone know if the Sn95 seats fit in a Foxbody and are they lighter than the factory Foxbody's seats?

[@Neomustangs]

Yes

[@awee5816]

@@Neomustangs thanks 👍

[@juanrenteria8908]

Hey bro keep bringing the info the guys that need it will be hitting the junkyards. I know I am didn't know that about Rangers and gonna look for some gears!

[@Neomustangs]

Will do

[@robertwood3970]

What is the name of that yard you were at?

[@isaivillegasfranco]

hi i need a AOD transmission for a 89 mustang do you know if any other cars have the same

[@ogsuperflygarage]

Keep the educational parts picking coming Bro!

[@Neomustangs]

Will do! Thanks for watching!

[@diamond_industries]

Very cool! Love the picking video!

[@matthewpeterson4305]

What type of junkyards are you going to? My local u pull it junkyards always want to know what you're specifically going for.

[@Neomustangs]

They ask I just tell them I’m browsing

[@79beans347]

I am past due for a jy trip.

[@robertwood3970]

5.0 Explorers are money pot for anyone building a Ranger.

[@Neomustangs]

I bet. Isnt the headers good for that swap?

[@robertwood3970]

@@Neomustangs I am doing a twin turbo setup so I bought a set of fox body Mustang stainless shorty headers. Still had to do extensive modifications to the diver side to clear the steering rod. I also have to run a 90 degree oil filter adapter from the Explorer to get it to clear the steering rod.

[@carlosivanpimentel]

Idk if you saw the other white mountaineer they had but I grabbed those heads a few weeks back and I saw when they uploaded that red 98 one to the website but couldn’t make out there In time good score man

[@W1ck3d86]

Good stuff man, need to get my lazy ass out and about see if I can find some gems.

[@Neomustangs]

Hell ya

[@jcnpresser]

I need to hit up the junk yard, I’d like to find heads and intake.

[@jerrymaldonado9397]

How much was that intake ??

[@Neomustangs]

$45

[@jcnpresser]

Did the aluminum heads come on explorers? If so do you know what years?

[@Neomustangs]

No

[@jcnpresser]

@@Neomustangs I was wondering. Guess I’ll just have to settle for some iron. Need to get me a free weekend to go. Trying to get mine daily driver reliable first though. Been enjoying your stuff dude, I’m pretty new to the channel, from ole Ky.

[@lamarrichardson1782]

Hell Yeah!!!

[@adventureswithsuperdave1290]

Get them parts

[@matthewkoenig5133]

What's the Facebook page name

[@Neomustangs]

Should be @neomustangs. Might be North East Ohio Foxbody Restoration

[@matthewkoenig5133]

Thank you I found it I wanted to show u my car