WE M4 vs GHK M4 vs TM M4 Accuracy Test

[@nyarlothep]

I have gone exclusively WE due to RS compatibility; with the right barrel (even stock) they can and will shoot accurately to 60m. Although you sell your soul to the devil before it starts to function properly. Great test; now I can die in peace.

[@GBBEnthusiast]

WE GBBRs were actually my first GBBR and I don't regret it at all. I love the RS furniture compatibility as well and it ran very well with a few small issues (double shooting, bolt lock not working), it's a true workhorse. I eventually sold all my guns (AEGs) and bought a TM MWS but heard so much about the GHK so I wanted to try it. The GHK had so many problems that I cannot recommend it to anyone and I'm working on a video on problems and fixes for the GHK M4. Thanks for watching and thanks for your comment! You definitely can't go wrong with the WE if you understand that the internals needs to be changed eventually and are okay with doing that as you go.

[@peter11256]

@nyarlothep would you mind elaborating on what to do to improve accuracy in general ?

[@nyarlothep]

@@peter11256 Hi, I use the A+ Rectifier barrel. I also use thin wire to improve the seal inside the chamber. Just twist tie the wire where the bucking meets the barrel. This is best done with super small gauge wire. Make sure the nub is centered when closing you may need to cut a new nub to eliminate side way play. The bucking stabilizers should splay evenly.

[@KrITIK4L]

It's great to see the performance on the 15m - 50ft on the diferent platforms...

[@GBBEnthusiast]

Yes sir, thanks for watching!

[@kiddowenproductions8152]

TM blew my mind, gah damn I need one of those.

[@GBBEnthusiast]

Yes sir, it's a very good buy if you want something that is the top performer. Make sure you're aware of the other issues down the road.

[@Labbazz]

gotta say I thought the GHK was gonna end up on 2nd place and I am not surprised at all that the TM got 1st.

[@GBBEnthusiast]

Me too, I thought it would be a closer test but it seems that the GHK wasn't performing too well.

[@Nomarypunto]

Alguno en españa le tengo que recomendar este review 👏🏻👏🏻👏🏻

[@City_is_jungle]

These vid are truly what I wanted 😉

[@GBBEnthusiast]

I’m glad you enjoyed the video and thanks for your comment! If you liked this one, I also have a GHK vs TM range test at 175ft, rate of fire comparisons, and gas efficiency comparisons.

[@erikarejante8705]

Great Video!😊

[@GBBEnthusiast]

Thanks for watching!

[@jordanoreilly6489]

Mws ftw 🙌🏼

[@GBBEnthusiast]

Gotta love the performance on those TM GBBRs.

[@jordanoreilly6489]

@@GBBEnthusiast absolutely 🤘🏼

[@frostylia1982]

tm mws best gbb ever

[@GBBEnthusiast]

Yes, definitely the best for performance. Thanks for watching!

[@steban2348]

Excelente!!

[@GBBEnthusiast]

Thank you for watching, your support means a lot!

[@sogerc1]

Wow, GHK and maple leaf got their asses handed to them. Suprising because my GHK AUG is very accurate bone stock.

[@GBBEnthusiast]

LOL yeah definitely. I think the stock hop up chamber is more accurate than the Maple Leaf but it's very fragile. If you really want to run the stock chamber, I would get a few extra just in case you break yours due to a jam or double feed. You could also try the TNT but YMMV. I heard some people really like it.

[@dailylifefood6986]

Great 👍

[@GBBEnthusiast]

Thank you sir!

[@VapourTrailz]

I get around 50mm at 16m on .32g using propane. Stock less six g nub and ra tech npas in ag bcg with guns modify nozzle !

[@GBBEnthusiast]

Nice, that's really good accuracy! Mine is completely stock so i just wanted to show what the baseline is for the platform. Thanks for your comment!

[@Plinker9747]

Wich platform are you referring to?

[@GBBEnthusiast]

@@Plinker9747 TM M4 platform

[@Plinker9747]

@@GBBEnthusiast thanks, I'm currently using the WE platform. Wich platform would you recommend, TM MWS or VFC M4 V2?

[@GBBEnthusiast]

@@Plinker9747 Good question, I think it depends on what you're looking for. For example, if realism/build quality is important to you and you don't mind fixing some issues, then the VFC would offer more of what you're looking for. In contrast, if you're looking something to game, want something accurate out of the box, and don't want to mess around with the gun too much then the TM would work for you. Personally, I like the TM because I try not to change too much about my guns until something goes wrong and TM rarely disappoints.

[@ember5935]

Groupings on all of them would've been closer if you used a real red dot. Edit: Trust me I've used a real one on my AEG and it's better.

[@GBBEnthusiast]

Thanks for the suggestion. The ACOGs that were used on the test hold zero for GBBRs and I have a TRS-25 on my TM M4.

[@ferdinandolatin2125]

I wonder why it has masterrace title while it performs not so excell. I sold mine after wasting time and money for upgraded, twice ,thinking mine was lemon

[@GBBEnthusiast]

I have had the same experience with GHK. I had problem after problem but I'm still hanging on to it to make more videos to show how to fix it and to make sure people know what they're getting themselves into. Stay tuned for the GHK problems and fixes video. The TM has also had some problems but fortunately not as many as the GHK and were easily fixable. Thanks for watching and commenting!

[@ferdinandolatin2125]

Thank you for your reply and nice to talk to you.

[@GBBEnthusiast]

@@ferdinandolatin2125 My pleasure, any time!

[@Labbazz]

I think the problems with the GHK comes from it being a more or less direct copy of the Western Arms system and that system was not good in any way shape or form imo

[@su29hkg]

May I ask what is the distance of this test ???

[@GBBEnthusiast]

50 ft

[@su29hkg]

@@GBBEnthusiast Thank you !

[@GBBEnthusiast]

@@su29hkg My pleasure, thanks for your comment!

[@peleggold26]

Not really fair for the GHK because your not using it's full potential with only .32s when it easily hops .48s

[@GBBEnthusiast]

Even so, I doubt it would make that much of a difference. All the guns used the same weight of BBs and were fired from the same makeshift bench rest. All biases aside, these are the results I got with my setups. I can try again when it’s warmer, but I don’t anticipate much change.