We make a transparent carburetor

Grab some G54 merch here - www.en.garage54.ru/
And we bring back the transparent intake manifold.
For business inquiries: [e-mail]

[@siraff4461]

I've worked on carbs for decades but thats the first time I've seen whats happening in real time. Really interesting and cool.

[@Snowaxe3D]

I am convinced, You guys can build a whole car from scratch....

[@freakyfreerider]

That's just what men do 😂

[@Driftingkalamari]

Next Challenge!!! Whole car from scratch!!

[@dennis-nz5im]

And it would run if it was 70c above or 70c below. Because Russia!

[@twoeightythreez]

@@DriftingkalamariIt will look a lot like the cars from the early 1900s but absolutely they can do it

[@twoeightythreez]

@@dennis-nz5im-70c? Not on gasoline it wont 😂 Flashpoint of petrol is -40 and it freezes at -60?

[@bill6255]

This absolutely blew my mind! Plus you can milk this project for a 2nd video with the carburetor under load on a test drive!

[@jwalster9412]

It's really clear to me now!

[@makeitpay8241]

@@jwalster9412 well played

[@scottbruner9266]

Destin on “Smarter Every Day” did something like this a few years ago. It was a small 3d printed one and put on a single cylinder engine. Some awesome slo-mo with a Phantom. Love seeing how the “Wizards of Siberia” do it…..

[@TAKIZAWAYAMASHITA]

warped perception did the same with crazy slomo

[@user-bb6vl1ee5f]

Они могли бы напечатать, но замысел состоял в том что он должен быть прозрачный. Печать не даст эффект прозрачности как на пластеглазе

[@jwalster9412]

U love how much the idle changes goign for normal- to rich- to lean AFR. You can hear it change as he ajuats it.

[@lesklower7281]

The carburetor is a complicated peice of kit and you archived to build one out if perspex and it worked of all your experiments with showing how various parts of a car engine works this has to be one of your best totally enjoyable

[@JPRD2379]

You guys never cease to amaze and entertain me.I know the video is only a few minutes, but the amount of time to design and fabricate these ideas into reality has to be considerable!

[@da_SpiffR]

Venturi, Bernulli, it's all 107 percent good. Great video (V)lads!

[@douglasboyle6544]

This is one of the best demonstrations of how a carb works ever. 5 Stars! If you used some colored smoke you might even be able to track the air inflow.

[@volvo09]

That was cool, you guys are always amazing me with what you can design and come up with.

[@troyhighley8491]

Best video ever! Very awesome to see how the carburetor is actually working!

[@marcr1333]

How are these guys able to crank out so many good videos? Like I can always count on them for new content almost daily.

[@XavierAway]

Daily? They release on youtube a couple of times a week by the looks of it.

[@alfaqvcarlos4406]

Garage 54 in 2053 "We make a transparent rocket powered lada and ride it to the moon"

[@TheRattyBiker]

Interesting to see how much fuel sticks to the intake manifold that will end up dribbling in to the cylinder after a short time - it also makes more sense to why you should get the engine nicely warmed before tuning a carb and why it can sometimes seem a touch lean on startup without any choke. 👍 Really nice experiment 🙂

[@Oink_Blaster]

Also, why having dimples or casting texture is better than smooth intake runners. The textured surface actually helps atomize the fuel better.

[@TheRattyBiker]

@@Oink_Blaster yeah I thought that when Vlad was on about polishing the inside - trouble is it wouldn't be as good for viewing.

[@BlackPill-pu4vi]

I wonder if creating a hot air stove for the intake would help atomize the fuel better. Drawing air through a piece of sheet metal wrapped around the exhaust manifold to get the air really hot might help.

[@TheRattyBiker]

@@BlackPill-pu4vi Some vehicles sort of do - it's also mostly to prevent carb freezing too. My Reliant Robin has one that sits between the SU carb and intake manifold.

[@Ammageddon89]

This is so cool! This would be a great tool to show mechanic-students how a carb works

[@jasonbirch1182]

Maybe for the transparent engine, you could just make transparent cylinders by decking the block right above the main bearing webs and using long headbolts to attach it through the clear cylinder block.

[@martin-vv9lf]

a transparent engine is impossible imo due to the lack of required tensile strength. it might work if you made it out of sapphire, but the cost would be obscene.

[@2coolwheels139]

That carburetor is a work of art! Great job!

[@MichaelThomas-wb2xu]

Always something new and interesting! What a great lesson for your crew...

[@LarryDeSilva64]

That was some of the most amazing machine work and an awesome demonstration of that carb actually working . Great job and video.

[@Troy440Dodge]

Great job as usual, Gentleman! I wonder if running a stiff wire brush in a crosshatch pattern through the intake manifold runners before they were assembled could help atomization. The intake would lose a considerable amount of vision, but this modification should help keep the runners a bit more dry and get more fuel into the cylinders. Thank you fellows for your efforts.

[@drjmansplace5174]

Interesting. Shows how important the stoki ratio is. Also illustrates well what your carb really is doing.

[@waldolemmer]

*stoichio ratio

[@drjmansplace5174]

@@waldolemmer Spellchecker sabotage strikes me again

[@markchapman2585]

Awesome video guy's. You guys always come up with something unique. Cheers 🍻

[@jittychitty]

Great job fellers... love your antics

[@bobi_lopataru]

I've been binge watching Garage 54 for 2 days now and I'm surprised at how early I am to this video hahaha

[@TheYardlet]

Awesome but where is the test drive!?

[@bradprimeaux8443]

One step closer to an entire transparent car.

[@raymondsprengelmeyer1278]

You guys do amazing work! I really enjoy your videos!

[@markysspotlight2472]

Coolest project in a while Vlad! Great job man 👍 venturi effect I believe

[@boshaznip]

Please do a video where you see how well the car drives using the transparent carby. Good work guys!

[@scorpion-in2xj]

What you need is coloured air going into the top of the carburettor for air flow 😊😊

[@VashStarwind]

I hear that Air Dye is pretty expensive tho :(

[@twocvbloke]

Add lights to make it glow, and if you make them complicated enough, you could have them change colour based on the engine revs, like green for low RPMs, red for high... :P

[@treeguyable]

Been done before, but, always great to see it.

[@ronaldrhoades9783]

that was great so fix the leak drill a hole in the center to mount the air cleaner (one does need an air filter) then take it out for a test spin around your garage or on your test track

[@plymouthmechanic3423]

Yessssss! Vlad and his team

[@andrerenault]

This channel has the perfect mix of mad science and legit science.

[@apache4541]

Great job. you teach me. how work carburetor gas path tube inside carburetor awesome !

[@MadScientist267]

Pretty sweet. Surprised the material stood up to the gas

[@karlmoffat6165]

Love it brother! Great job!!

[@anibalbabilonia1867]

I’m convinced this guy’s are automotive geniuses!! They can built anything out anything! Amazing!👌😂👍

[@mildly_miffed_man1414]

They just get more and more incredible! Amazing.

[@adam7868]

They are russians very smart people

[@grugbug4313]

Solid! Top KEK! Peace be with you.

[@Pulverrostmannen]

The engine ran exceptionally well with that carbie for sure

[@sidgreen921]

That see thru carburetor is really cool

[@carwashadamcooper1538]

Garage 54 (and BMI Russian) are probably the best auto shop teachers in the world. I would love to spend a day or three with Vlad and the boys!

[@tannerhouston9595]

It’s the Venturi effect 👍, you guys are awesome!!!

[@bigjay875]

Nice work guys!

[@teddyyoung1556]

Would be awesome if you could do a milage test from stock carburetor to ur new carburetor

[@rocketsurgeon11]

This was fantastic!

[@Sarmadfawzi]

You guys are amazing, I think one day you will be able to start a car with just water Keep up the good work

[@trm4life]

We're all waiting for a car with all the successful transparent parts installed.

[@foreverendeavors6210]

Ran pretty good.

[@chrisfreemesser5707]

That was super interesting guys...nice job!

[@Roger-hq1yt]

Wow that runs really well, v impressive.

[@kvjk188]

We need that 2 stroke to work

[@nikolaiylimys5250]

Transparent everything

[@nemoaspieman369]

8:06 Bernoulli's principle but that is called the Venturi effect.

[@VashStarwind]

To be fair, that might be what they call it over there

[@granthawkins9142]

That was really cool!

[@JuulOrDie]

Great video as always. Love from USA

[@romek3965]

I wait for it! Thanks guys

[@72polara]

Very impressive!

[@deanmagdic7053]

Well done guys

[@lescrooge]

Venturi affect. great job

[@hirnlegorush]

one small step further to a complete clear Lada / Shiguly :) wohooooo

[@user-lx1nh7gg8o]

drive it sounds like it's running great

[@gabrielv.4358]

Incrivelmente legal!!!!!!! VOCÊS TEM QUE FAZER um motor 100% transparente, com o bloco transparente! E COLOCAR todo o resto transparente, vocês são TOPS@!

[@RafaelGgama87]

Já fizeram esse experimento, não deu muito certo...rsrs... são 2 vídeos

[@SecureSuppliesLimited]

This is a amazing video thank you

[@pineapplejuice87]

Keep it rockin my guys 🎸🎸

[@anonymously241]

107% success!

[@MrAmrmnabil]

Way too ingenious.

[@korealaaya1826]

Totally SEE through car from the engine to the rear axle

[@psychosis7325]

Should try make some see through safety squints 😉

[@98f5]

great video!

[@DadsGarageDiagnosticSpecialist]

Another great video!

[@fuse8052]

This is just amazing. You said you think it's the Bernoulli effect. I think it's venturi effect? Not sure who's right.

[@martyburgess341]

How about making a clear fuel injection manifold and rail. I know it is much higher pressure than a carbuetor. But it would be cool to see!

[@douglasboyle6544]

I was thinking the same thing! That would be fun even if it failed because it'd teach a lot about how the system works

[@lilmike2710]

That's really cool. 👍

[@monomarino5349]

Do you guys get your ideas when eating mushrooms?

[@mikecorleone6797]

I was waiting for the drive lol

[@eacequitableaccesscampaign7786]

Smart and interesting dude.

[@Yogenh]

You did great

[@charlescraib6761]

How's about a blower and nitro injection on a stock lada engine ,, that would be great to see

[@fester73666]

Hey there fellas, very cool transparent carb video, Vlad,why are you filming in your pyjamas?😆 😳👍

[@josephgermany7446]

@8:14. Venturi* effect based on the bernoulli principle

[@evanepp]

Very Cool! Excellent job Guys!

[@mjwittr21]

GOOD JOB!

[@jordancox559]

Give them a few years and we're gonna have a video with an entirely see through car. 😂

[@willienorstrom2616]

I want to see that lada on a dyno with transparent carb and The intake

[@2strokeguru]

Great job

[@janvanderwal2744]

Nice.. you can ad some colored smoke to see the air going

[@xeedexgaming8690]

Easiest way to troubleshoot a carb! Make it see through!😂

[@jessestout8646]

Use colored smoke in order to see the air in the carburetor!

[@vuistpower9978]

Can you make a cvt transmission, I'm curious about that 🤞🤞🤞

[@azri2ayie]

Indeed it is interesting just to see it's work..saltue!

[@emilschw8924]

I'm confident they can build a 100% transparent car.

[@danielmerhi4456]

8:17 it's the venturi effect 🤓

[@gj91471]

Entrained and Dissolved Air in the fuel (in the fuel tank) is a bigger problem than water in fuel.

[@MasterYota4Runner]

They need to just combine all their transparent parts onto the transparent lada they made awhile back.

[@viliryynanen8655]

Ideas transparent a radiator and or intake manifold

[@1marcelfilms]

BRB polishing my carburetor

[@vdelisget-thumbs2708]

Create motors all in see trough whit all your stuff 🤘