We make indestructible polypropylene wheels for a Lada

Grab some G54 merch here - www.en.garage54.ru/
With a burnout in the end, of course.
For business inquiries: [e-mail]

[@danielparsons3995]

Those work better than I ever thought they would.

[@MadScientist267]

Right? Haha I bet PVC don't look like that 🤣

[@dalemoss4684]

They really held up well! Who woulda thought

[@skorpius2029]

Chevrolet CEO after watching this: "Dear valued customers, we've just revolutionized your driving experience with our new polypropylene wheels. More cost-effective and lighter than ever"

[@dalemoss4684]

@@skorpius2029 still better than the shitty spare wheel they give you

[@soundsoflife9549]

I was surprised as well!

[@mediocreman2]

I see someone has never worked with PVC pipe. And that's a pretty light car.

[@Tranquilitarian]

Very impressed! I would love to see you make the Lada into a hovercraft.

[@volvo09]

Make a prop shaft out of that pipe. Might last for a while.

[@carwashadamcooper1538]

In the US That white pipe is called Schedule 40, and it's a bit brittle. for a prop shaft, they would need the dark grey type, which is schedule 80 and far stronger.

[@hughjass1835]

Schedule 80 is white also. The grey is either non pressure drainage or electrical conduit

[@stickfurniture02]

The same material can be bought in sheets. Buy sheets, cut circles and make tires. It should work and last longer because it will be a solid material.

[@Jeesus353]

Cut long sheets, install around tires, go drifting!

[@jwalster9412]

Cut notches for the treads and Wala, DIY offroad wheels.

[@jasoncostello4761]

I would love to see you make drift Wheels out of five of them

[@SoundsLegit71]

Do a build where you combine all the crazy things you have tried that work well.

[@RipstickMaster1998]

Like install their centrifugal clutch on the car they cut in half, with all the see through engine parts? That would be fun to watch lol

[@jahraizer250]

The burnout was killer

[@nunodaniel6262]

still better than a peugeot

[@acuraintegra101]

Hey only place a Peugeot is any good is on Gran Turismo the 206 rally car was badass ❤

[@fenrir4046]

EW12 Peugeot Engine is pretty badass.

[@bitkarek]

@@acuraintegra101 only 205 and 405 rallye cars were awesome.

[@matiasfpm]

​@@bitkarekbarly related to the street cars 😅

[@kylereese4822]

Wrapping rope through the spokes over the rim would remove the bumpiness ??

[@TheRattyBiker]

Great set of wheels, do a winter snow / ice version that have studs / bolts on the corner sections.

[@jwalster9412]

These look like they would be wonderful for offroad use. How long would they last before they get stuck in deep mud?

[@grandtheftauto1233]

8:26 the excited voice is legend

[@3rdpig]

Not indestructible, but far tougher than I would have thought. Thanks for doing this so I didn't have to! Oh wait....

[@TheGreatDaneR]

Those worked 107% better than I thought they would! 😂

[@Sludge73]

Pipe and the home made hub was rather impressive. Good show.

[@Casualhobbiest]

2:28, that's some phenomenal background music.

[@matiasfpm]

Would be cool trying those wheels on snow. 😊

[@soundsoflife9549]

If they had more sections, built out a bit, this would work very well I think.

[@shanepowers7566]

Y’all just keep coming up with new ideas! 👍🏻. From Oklahoma, USA.

[@ogunsanyaolusegun3051]

So durable.. Didn't expect it to last that long

[@dimitar4y]

hmmm there's potential about "Multi spoke" wheels. The fact that multiple tracks can adjust torsion independently of one another, allowing each track to find optimal grip. The pipe spokes are flexible allowing this effect. This is used already in springy recovery ropes - they being springy is magic of how they work better than just chain.

[@Shadobanned4life]

Astonishing! You good men are never bored or lacking ideas.

[@MattyEngland]

Great content as always.

[@mosttemp]

i enjoy these videos as they try new things pushing the envelope and being different . id like to see spring pistons maybe double the springs and weld then better lol . just to see how it would work

[@jeffrykopis5468]

If you were to find a 24-inch diameter plastic water or sewer pipe, you could cut slices off them to make round wheels.

[@ImmortanJoeCamel]

I think they already did that to make drift wheels. Except they deflated the tyres and crammed the pipe "rings" over them and reinflated.

[@jonass9]

I think this experiment actually worked out really well for a change!

[@olegon6732]

Idea what to do with a new set of this pipes: a camshaft and/or connecting rods :D

[@Gres-iu2iw]

this is content!!! what a breath of fresh air

[@stevearmstrong4561]

I thought that they would bust apart before they left the garage..Amazing!

[@ndavid42]

You should make a whole car out of PVC tubes at this point!!

[@thedarkknight1971]

Yeah I said that too, Polypropylene tubular car chassis! 👍 Then Sheets of the stuff to make the panels, these tubular things as all four wheels... The list is endless! Hahaha

[@ENGINERESCUE86]

Make a propshaft

[@martinda7446]

😸 Con rods.

[@olnnn]

a.. polypropshaft if you will

[@martinda7446]

@@olnnn Brilliant, I wish I'd thought of that!

[@KA9DSL]

Excellent snow tires!

[@mungmungie]

I wonder if there might be a way to use the round surfaces of the pipe to be the tread of the tire? Or perhaps even go the other way and have the ends of the pipes forming the tread? It would certainly be a very different sort of radial!!!! Those would have better grip, but the key would be to secure the pipes to something solid. It would have to be on a monster scale--but who would be crazy enough to do THAT? Hmmmm. 🤔

[@kennethanway7979]

Great channel!

[@AnalogDude_]

8:04 that sorts out the fabrication imperfections.

[@JamesLayton-nn6pl]

Hey guys what about using the same material to make an exhaust or for radiator hose? Would be interesting to see how long it would last considering how long those wheels lasted!

[@4BillC]

Definitely didn't expect that!

[@skar5424]

Now that's what I call reinventing the wheel

[@ZoneKei]

madness, love it

[@jasonz7788]

Awesome thanks 👍

[@jeffreygout]

Next time fill them with flex seal so that once the outside of the pipe is worn down, you have a rubbery substance to give better grip on the asphalt

[@Soggyliquid]

I wanna see a car made out of the pipes, similar to their log car video

[@shanepowers7566]

Need 4 of ‘em.

[@homelessEh]

garage 54 just Cracked the Puncture proof consumer tire conundrum. will not develop flat spot from sitting. survives burnouts

[@PapiDoesIt]

I never thought that would work!

[@Thesyndicate11111]

Excellent!

[@ksz191]

This is schedule 40 type of pvc, You guys should try schedule 80 , it's much harder and tougher plastic

[@lilmike2710]

Now coat them with the bed liner heavily and see if there's traction.

[@jonathanryan2915]

You guys have to try them again in winter ❄️☃️❄️

[@justinraywolfe]

3:38 "The first few centimeters are always the most crucial..." - she 🤣

[@TheRattyBiker]

Build a whole Lada chassis and wheels out of the tubing, panels out of perspex, pop an engine and drive train and go off roading.

[@commietearsdrinker]

Imagine having to do a burnout everytime you change into new tires, drag race style. It would make the whole ordeal much more exciting.

[@mattharvey8712]

Bravo.......u should see what a 3d print a I would make......cheers

[@Epsonblade]

Burnouts make EVERYTHING better!

[@Rockport1911]

When your Lada comes witha pretty good lathe to make its tires round again :) Should have tried to drift with them ( like those japanese kei car drifters do with their palstic rims around the tires for less cheap grip).

[@mann_idonotreadreplies]

Did you know? You can buy a polypropylene baseball bat and it's tough af. Now u know

[@fatrambo73]

torsion bar getting a good work out

[@jason43506]

Hey guys i love watching your videos ,love the content now i ha e a question coud you weld two strait 8 engines together and see if it would run that would be awesome Thanks guys

[@lukeFugate]

Make a dune buggy type frame with this pipe, and put a Lada drive train in it. Basically a whole car out of pipe.

[@Patrick_Cooper]

Crazy Ivan at it again...

[@letsdoit7630]

Would be interesting to see these perform in snow.

[@johnrussenberger9882]

Do the same thing up till the burnout, after it's round screw tire tread onto it making an airless tire!

[@MrSlugbait]

Best wheels yet.

[@bartismoellis1052]

Build a Lada out of pipe a sort of skeleton car form the chassis to the roof pillars.

[@Universal.G]

Please make more offroad test videos

[@jessehanson8928]

Do the same thing you did with 3 in the hub, except somehow wrap the outside of the pipe with carbon fiber, and fill the inside with some kind of really durable material like flex seal, or maybe molten rubber? Then top it all off by spraying multiple layers of rhino lining material and/or flex seal on the outside, possibly some metal wire wrapped around the inside as a "radial" You can get some real life out of those pipes!

[@The_RC_Guru]

Try hundreds of ferro rods stuck into a tire tread and do some super sparky burnouts at night? Be a cool visual anyways.

[@-A-Hybrid-Skunk-Productions-]

Amazing how durable those pvc pipes proved to be.

[@mann_idonotreadreplies]

This is PP not PVC.

[@michaeld308]

The music is nice lol

[@darthgbc363]

Now use heated sand to make circles of PVC.

[@righty-o3585]

I'm blown away that they didn't immediately collapse just under the weight of the car. 😳

[@supersmalls]

Take some treads and glue them to the outside edge, then it will gain some grip on road

[@jeepdude7359]

They should do a lifted Lada build.

[@david_garray]

Next, cover the two back tires with carbon fiber. Let them dry then take the car for a spin and go drifting with them

[@williamhardes8081]

eat your heart Michelin! this would be fun drifting around the test track. maybe a poly pipe tail shaft?

[@lesklower7281]

I don't think you have invented a replacement for the wheel and tyre yet maybe one day keep up the entertaining videos

[@metamaggot]

you could have slapped some tyre retreads straight on to them once they were rounded off

[@stopdusty420]

Just wow.

[@38911bytefree]

Nice !!!!

[@DirtyHairy1]

YESS get more micro plastic into your ground! makes it more durable.

[@jimiali4709]

How about make a complete exhaust system using the same quality pipes.?

[@robwulz3493]

And thats how cavemen made dinosaur bone wheels on their chariots.

[@carguy815]

I used to make my bike wheels indestructible with pool noodles cutting them in half and placing them on the inside of the tyre outside of the innertube never a single puncture other idea is pure rubber tyres like with my BMX at 5 years old those tyres I literally cut stabbed etc they're probably still intact a little extra bounce however you could fix that with suspension if applied to a car obviously

[@mann_idonotreadreplies]

COOL story bro

[@avrahamzucker2605]

Stockpile fittings for the apocalypse in order to not run out of tires

[@benterry6463]

How about a whole tube chassis maybe even in the shape of a Lada

[@hotrodderrecycler3202]

Imagine you flattened the sides and glued them together. Then filled the tubes with no open Ts with resign. Once rounded right diameter glued on tire tread. Then test them vs police spike strips. For the ultimate get away car. Or wrap the spike strip around the axel.

[@alexpetro240sx]

Hope thrtes a speed bump test

[@fastinradfordable]

Wrap a hose around a wheel. And inflate the hose. In place of tires!

[@-powerband-gamer-6117]

you should try making wheels from all sorts of things

[@arjunbabu6999]

Which brand pipeing is that , having good quality

[@MrAmrmnabil]

Impressive

[@Reaper_1994]

Could this be used to make an airless tyre? As in, wrap a tyre over them?

[@jeffreydubbis2965]

Test how long new theirs last whit a burnout

[@cousinjohncarstuff4568]

How well would they work in the snow?

[@mjojo1000]

I have an idea what about a drive shaft made out of this stuff it should work

[@jase6709]

Impressive. I was waiting for a crack as soon as the car was lowered onto the ground.

[@acuraintegra101]

эй, это было действительно круто, мне нравится этот канал, я смотрю все твои видео, я не могу насытиться, я действительно хотел бы расслабиться с тобой и создать что-нибудь. мне было интересно, думали ли вы когда-нибудь о постройке lada stretch Limo drifter, я думаю, это было бы круто, и для изюминки всей конструкции сделайте задние колеса двойными, чтобы больше дымило от шин, если вы не можете заставить их вращаться, поставьте туда двигатель Cummins, он будет дымить, не останавливаясь, пока шины лопаются, лол

[@hitekredneck109]

Or make it with 2 engines!! One in the front,one in the back with 4 wheel steering!!! They could make it from 2 front wheel drive cars.

[@hughjass1835]

You understood that?! I thought his car ran across his keyboard a few times

[@mann_idonotreadreplies]

Type English u vodka Loving rusky

[@carbineZDH1]

Maybe a driveshaft next? Connecting rod?

[@petej.8676]

How about giant ball bearings for wheels. Or a Lada that runs on a lawnmower engine

[@Adam-nv9zo]

Gonna need a lot of weights to balance those😂

[@2Spookeh4Me]

This would be pretty good for an apocalyptic set of wheels for horse drawn carts

[@tomcadero9875]

Polypropylene pistons next.