My last two trucks before retirement were 550 Cats. One had a million on it before I bought the next one and put 750,000 on it before retiring. Never did a thing to either aside from oil and filters every 10,000. The golden age...gone.
@jessebounds6795Ай бұрын
we love our old cat engines we still have 379s with them running everyday
@nathanwoodward8877Ай бұрын
I am the foreman at a school bus garage. We have 200 buses in our fleet. We switched to R99 almost 2 years ago. I was pretty nervous about it since we had so many issues when we switched to Biodiesel, but so far R99 has been great. We rarely have to force a regen on our fleet now. The only issue we have ran in to is the fuel/water separators seem to plug up more often.
@jessebounds6795Ай бұрын
so far so good for us thanks for the comment
@TopEarthFindsАй бұрын
Great video, great information, beautiful trucks. Can't wait to see what's to come with this channel!
@jessebounds6795Ай бұрын
thank you much more to come soon
@kellykonoske91Ай бұрын
Sorry about the motors guys, but I cant tell you how good it looks to see those hoods every day rather than plastic trucks. X15's and ISX's have always sounded like they were coming apart. Just my two cents. Take care. Todd the retired trucker.
@glennoliphint8691Ай бұрын
I like his truck and trailer the best. But i like the rest of his trucks too. And I'm like you I don't like plastic want to be trucks.
@luckyjackson6973Ай бұрын
In total rebuild situations you might consider Speed of Air pistons. The technology is over my head but the good results are adding up out there.
@jessebounds6795Ай бұрын
we are going with PDI kit
@luckyjackson6973Ай бұрын
You might be interested in an additive called Pittsburgh Power fuel borne catalyst. I've heard of a fleet owner and owner ops having much success with it!
@jessebounds6795Ай бұрын
thanks for sharing the info
@scottdrenske830Ай бұрын
Need to check yr grounds for sure. Bad grounds do what yr looking at.
@RibstoneColonyАй бұрын
When you go to put new sleeves in check for side swap on upper receiver bore if they dont fit snug replace the block
@jessebounds6795Ай бұрын
we will for sure
@Romans--bo7brАй бұрын
Re-Power your trucks with the 12.7L Detroit... end of "issue's". Of course, drivers can be a root source of engine issue's, "sometimes", as well.
@clydeweaver3569Ай бұрын
Liners must be set to 14 thousandth protrusion. I run thd ports on the east coast. Ports don't care if the trucks are deleted. We have a list of things we do to the X15s and they will outperform the Cats.
@andrewknotts7806Ай бұрын
We run about 20 trucks, lowboys and dumps, harsh conditions and heavy, I’ve had the best luck with oem kit, and I only run APC stage 4 head, we stay with the vgt because of the weight we haul, only run delo and change at 10,000 normally for us between 500-600,000, we had one cm2250 snap a crank at 230,000
@joefriesen8243Ай бұрын
Have you tried the Max Milage Catalist from Pittsburg power ? It should help with nox sensors.
@RibstoneColonyАй бұрын
that stuff burns soot off at lower temps
@joefriesen8243Ай бұрын
@ yes I’m aware. Do you have experience with it ?
@RibstoneColonyАй бұрын
@@joefriesen8243 yes it keeps all the sensors clean no carbon build up
@jessebounds6795Ай бұрын
we will check it out
@ruxoneto6560Ай бұрын
You mentioned about filters plugging up ?? Oil filter's. Cummins issued a builtin to service writers only , the egr cooler were leaking , before cummins would warranty you had to charge cooling system (2) times before cummins would consider warranty cummins was blaming it on aftermarket filters ( top of the line brands ?😅
@kellykonoske91Ай бұрын
Sure miss Cat motors!
@jopete681Ай бұрын
They are making new blocks again and can replace the isx with a cat! Just seen one at pete store the other day! 6nz style
@outlaw9200Ай бұрын
if the engines are only 700k lifespan why not just starting swapping to like a red top or c15 to have that reliablity with jakes back
@youtubeisawesome2487Ай бұрын
get a apu, stop idling, 30-35 thousand hours on your engines? go into insite, features and parameters, aftertreatment, dpf,enable the first two settings, your issues with aftertreatment will go away,