We Ruined The Paint Job!

  Рет қаралды 112,078

goonzquad

goonzquad

Күн бұрын

Пікірлер: 171
@halfshark101
@halfshark101 6 жыл бұрын
I started painting the same as you. Invest in an air water/oil seperator ( they are fairly inexpensive) and install inline far from air compressor. Smaller compressors work hard when painting and heat up air which cools and condenses on the way to your paint gun causing water vapor mixing in paint. The more you do this the easier it will get. Your paint work so far is great keep it up!
@TheDamnSpot
@TheDamnSpot 6 жыл бұрын
Never paint while it's raining unless you have a pro paint booth. The increased humidity just wrecks the paint job.
@erikvanname
@erikvanname 6 жыл бұрын
I just got fired for watching this at work. Ain't care. Goonzquad for life.
@UhhhWinski1
@UhhhWinski1 6 жыл бұрын
those reamers are nice for tie rod ends but if you're using through bolts why not just use a standard drill bit and save the reamer for when its needed?
@ToyotaLandCruiser
@ToyotaLandCruiser 5 жыл бұрын
UhhhWinski? I wonder the same. This is not how to use reamer!
@diver362
@diver362 6 жыл бұрын
Keep up the solid work. Love the videos thus far. Like others said, this has become my favourite channel to keep updated on. Im sure it'll stay that way. Keep it up guys!
@fakherddinyoutubechannel2819
@fakherddinyoutubechannel2819 4 жыл бұрын
wow i am sooooooo proud of you guys watching these videos makes me love your channel so much more because I see your guys's struggle all the way to where you are now and i must say you guys are genuine people thank you for making this channel
@1967lathrop
@1967lathrop 6 жыл бұрын
Watching the rest of your stuff. Good to see the younger generation has work ethic. I know your mom and pops are proud of the men they raised.
@danyasha5
@danyasha5 6 жыл бұрын
I just found your videos about a week ago and have been watching them non stop. Watching your videos fixing up wranglers gives me hope that we can eventually fix my husbands 2000 Jeep Wrangler Sahara edition. It has been sitting for a few years and he had to stop driving it because it is stuck in 2nd gear. When you press down on the clutch it doesn't even let you start it. It acts like there is no clutch. They had to replace the clutch in it a few years prior since the clutch went out on it around 150k miles. We love that Jeep and would love to get it road worthy once more.
@mitch7504
@mitch7504 6 жыл бұрын
Don't worry about sanding off the paint. Wash it off with reducer! Best trick in the book.
@dloadthis1617
@dloadthis1617 5 жыл бұрын
You need to get some disposable paper painters jumpsuits to avoid getting overspray on your good clothes.
@smilecraftdentistry7809
@smilecraftdentistry7809 6 жыл бұрын
talk about adaptation to the conditions ! you guys do a great job to get things done close to professional work
@goonzquad
@goonzquad 6 жыл бұрын
deepu krishna Thanks we learn something new everyday to get us closer to being a pro
@DallasD_
@DallasD_ 6 жыл бұрын
Wipe it down with reducer and get all the blue off (same stuff you thinned the paint with), not so much thou as to start affecting the primer. Then lightly resand it with 500 grit to recreate the bonding surface again. - that mapping looks like you might i have some leftover grease that got smeared around - i always wipe down 3 times with wax and grease remover and tack-rag twice before spraying. Not sure about the moisture comment above, could be right, ive always sprayed in a warm professional booth, but the temp def. needs to be 70 or above or you will need a fast-drying reducer for the color & clearcoat reducer, and fast-dry hardner for the clear-coat. Ask the guys at the paint shop the proper type of reducers and hardeners for the humidity and temprature that you'll be spraying the color and clear-coat in. FYI an autobody supply shop might be cheaper and more helpful, open an account with them under your LLC that you have, or will create, all these things are a tax-writeoff, ur runnin a (youtube) business ;) - add onea' these suckers to all your sprayguns! - www.tcpglobal.com/TCP-MF-201.html?gclid=EAIaIQobChMI_92Lruz-2QIVD43ICh08MAgfEAkYAyABEgKfYvD_BwE
@marktilley388
@marktilley388 6 жыл бұрын
Alexander D definitely the humidity could be a big issue but I agree with the rest of your comments
@DallasD_
@DallasD_ 6 жыл бұрын
yes i havent sprayed in the rain enough to know the limits you can push, gotta be some threshold, its always higher then they say lol
@marktilley388
@marktilley388 6 жыл бұрын
Alexander D yes unfortunately I have learned the hard way painting under a tarp in high humidity it can cause all kinds of issues, from fisheyes to runs, to adhesion issues.
@marktilley388
@marktilley388 6 жыл бұрын
I would add a water separater as close to the gun as I could as well
@ThirdDegreeWitchExplores
@ThirdDegreeWitchExplores 6 жыл бұрын
what a couple of really nice , genuine guys , a brilliant watch , thanks muchly :)
@pablop9495
@pablop9495 6 жыл бұрын
i honestly patiently wait for yall guys videos notifications & i don't go ahead and watch them, i get in my comfort zone with my phone on "do not disturb" to watch them... i love how you guys basically redo & go beyond to do all the preventatives... i dont doubt yall can sell those cars for top dollar within a week... the cars yall are pulling out are basically beyond new
@rickb8808
@rickb8808 6 жыл бұрын
If you guys get a older jeep you should consider tintable Raptor bedliner to paint it. A buddy did his Suzuki Vitara woods buggy and it looked great. Tinted it red. Easy to spray. He used three coats and held the gun back a little for smoother texture. And since it's tinted clear through if it scratches it isn't as noticeable but so far it's held up to abuse. I really think it would look good on the Jeep hardtops also. Good job so far, "except for the paint issue, but we're all human".
@MarioloMEngineer
@MarioloMEngineer 6 жыл бұрын
To much humidity since it was rainning. Sand up a new key on the top and make sure Humidity is less than 30%
@chrisfiato3244
@chrisfiato3244 6 жыл бұрын
when you go to sell this rebuilds are you able to get a new title or are they still salvage titles?
@kylevantassel7259
@kylevantassel7259 6 жыл бұрын
I have a tip for you that I have had to use a couple of times in my life and I have been painting for more than 20 years. If you see the job going south like that in the first few coats , grab 5 gallons of gas and some clean rags and wash it off real fast. It will come right off clean again in minute . Then wash as you normally would with prep sol or the like and go again. If you let it set up its a sanding mess and all of that blah blah blah. I know how it sounds and I was in a real jam the first time that an old timer told me to do it and it worked and saved my ass.
@BurningFlameFire
@BurningFlameFire 6 жыл бұрын
Awesome color. You guys definitely need that building
@grizzlybear702
@grizzlybear702 6 жыл бұрын
Too humid bros... let it set up... resand... and once the weather clears up hit it again... love your builds... I'm learning paint as well 👌
@pablomondragon4017
@pablomondragon4017 6 жыл бұрын
what steering kit did you guys get ?
@yurmum7875
@yurmum7875 6 жыл бұрын
Copped a white goonzquad shirt yesterday, when will the stickers be up? Wanna put one on my tj.
@goonzquad
@goonzquad 6 жыл бұрын
Yur Mum Awesome bro! The decals will be up soon, the correct ones are going to take a while to get in. I do have the clear ones as seen in my video but I don’t really like them.
@PowerHouse2013z
@PowerHouse2013z 6 жыл бұрын
Really look forward to more videos ! Y'all turning into my main channel to watch ! Keep it up !
@caseyhogan2142
@caseyhogan2142 6 жыл бұрын
Are those heim joints from rod end supply?
@jeepdriver9602
@jeepdriver9602 6 жыл бұрын
Cudos on stopping while you are ahead and recognizing you have a problem.I noticed the other day when you primed the hard top, that you guys said it was about to rain. I painted Navy aircraft for 8 years, and I actually had this same scenario happen to me one time. The humidity is a huge factor, but I believe that the problem lies in the primer soaking up water. You didn't say whether or not you left it out in the rain after priming, but you did rinse it off with water. Primer will absorb water, and the water will not mix with the paint, therefore the paint will not adhere to the primer. I hate to say it, but I believe you guys will have to sand it back down to the plastic of the hard top, and re-prime it before you paint it. Make sure it is dry outside, because it will soak up the moisture in the air as well. Fresh primer, scuff, wipe down with the grease remover and tack cloth, then paint. Otherwise you might end up with a peeling problem down the road.
@SangTran-zn7lq
@SangTran-zn7lq 6 жыл бұрын
This channel is pretty damn cool. Hella chill. Subscribed.
@ocrun6765
@ocrun6765 6 жыл бұрын
You guys almost up to 25K. Good job.
@legoMan104
@legoMan104 6 жыл бұрын
patiently waiting for long arms.... love watching those installed
@Detective681
@Detective681 3 жыл бұрын
what size lift kit is on this jeep.
@ACDesignsGarage
@ACDesignsGarage 3 жыл бұрын
Love going back and seeing where y'all came from, looks like my channel now lol, keep up the Rad work!!!!!!
@vinmad6669
@vinmad6669 5 жыл бұрын
I'm kinda new here......... watching projects start to finish.........IM ADDICTED ✓✓✓✓✓✓✓✓✓✓∆
@harrisonphillips7719
@harrisonphillips7719 6 жыл бұрын
Where in Georgia is the jeep junkyard you guys went to
@bernard_prevost
@bernard_prevost 6 жыл бұрын
What brand is the steering set up???
@juangarcia-bv2vm
@juangarcia-bv2vm 6 жыл бұрын
Great videos,love the content keep up the hard work!
@AppMagnet
@AppMagnet 6 жыл бұрын
Do you guys do this full time as a job? Like buy and flip vechiles
@jaywest4102
@jaywest4102 6 жыл бұрын
How does this channel only have 24k subscribers? If you’re subbed tell a couple friends to watch. These guys deserve an audience bigger than those idiot Paul brothers.
@MetaView7
@MetaView7 6 жыл бұрын
If they do a Lambo, they will 10-fold the sub in one week.
@denismagnaval3467
@denismagnaval3467 5 жыл бұрын
Bonsoir pour quoi vous acheter pas une cabine de peinture pour peintre vos pièce de carrosserie de voiture ?
@JeanReol
@JeanReol 6 жыл бұрын
Awesome videos guys... A fucking great channel that gets things done and almost no waste of time talking shit... Cheers from Panama!
@TheBatgag809
@TheBatgag809 6 жыл бұрын
You guys didn’t want to powder coat the track bar and tie rod? What about chips from rocks?
@mastic1000
@mastic1000 6 жыл бұрын
Really good videos lads , nice work
@1one3_Racing
@1one3_Racing 6 жыл бұрын
Hey! These paint videos weren't in the Rubicon playlist. I though I missed a bit. I missed the blue jeep build so just binge watched it.
@Martin-ff1wt
@Martin-ff1wt 6 жыл бұрын
Great work guys; very interesting to watch. I'd love to do what you do but too busy lawyering.
@jerrymundwoodjr.2084
@jerrymundwoodjr.2084 4 жыл бұрын
i cant wait 4 ya'll 2 finish your dads truck i was wonderin why didnt him a newer truck
@bigcoutree1986
@bigcoutree1986 6 жыл бұрын
this build looks great so far boys
@jettanthony4902
@jettanthony4902 6 жыл бұрын
Whats the paint code for that blue?!?! I love it and want to paint my jeep that color!
@kswyg001
@kswyg001 4 жыл бұрын
PB3, Intense Blue Pearlcoat
@jeremyelement1091
@jeremyelement1091 6 жыл бұрын
Too much moisture. You need to resend and re primer when it’s cured. Do rush it or your next coat will end up the same. Need to wait for it to be dry and preferably around 60-70 degrees depending on paint quality and mixture.
@goonzquad
@goonzquad 6 жыл бұрын
Thanks for the great info!!! Thanks You
@jeremyelement1091
@jeremyelement1091 6 жыл бұрын
goonzquad love your videos guys. You’re one of the only 2 people I have my notifications on for. I enjoy wing able to watch someone more less like me(not rich or have loaded parents to help) in building these things man.
@DallasD_
@DallasD_ 6 жыл бұрын
Wipe it down with reducer and get all the blue off (same stuff you thinned the paint with), not so much thou as to start affecting the primer. Then lightly resand it with 500 grit to recreate the bonding surface again. - that mapping looks like you might i have some leftover grease that got smeared around - i always wipe down 3 times with wax and grease remover and tack-rag twice before spraying. Not sure about the moisture comment above, could be right, ive always sprayed in a warm professional booth, but the temp def. needs to be 70 or above or you will need a fast-drying reducer for the color & clearcoat reducer, and fast-dry hardner for the clear-coat. Ask the guys at the paint shop the proper type of reducers and hardeners for the humidity and temprature that you'll be spraying the color and clear-coat in. FYI an autobody supply shop might be cheaper and more helpful, open an account with them under your LLC that you have, or will create, all these things are a tax-writeoff, ur runnin a (youtube) business ;) - add onea' these suckers to all your sprayguns! - www.tcpglobal.com/TCP-MF-201.html?gclid=EAIaIQobChMI_92Lruz-2QIVD43ICh08MAgfEAkYAyABEgKfYvD_BwE
@jeremyelement1091
@jeremyelement1091 6 жыл бұрын
Alexander D there’s a few big differences in painting in a booth and painting outside lol. I can paint outside better than a few of my professional body guy friends who’ve been painting for years. But once we hit a booth they out play me. I do agree it does look like grease could have caused it but I’ve also had the same result in a paint job done in the rain and it turned out to just be the moisture. Definitely take his advise tho. Clean clean and clean again. And if you have any nervous feelings. Clean one more time. You really can’t OVER clean when it comes to home paint jobs. Just make sure there is a nice primer coat left to bond.
@DallasD_
@DallasD_ 6 жыл бұрын
yea booth is controlled environment, easy to calculate evrything, lots of guesswork involved when you have so many variables outside, ive sprayed outside but i make sure to match the condition to a booth as best as i can, weedkiller hand-pump to wet the floor, etc... (regular hose sprays water evrywhere) I did my 91 YJ in the driveway and no booth, checked the weatherchannel.com every day till it was perfect temp and the windspeed was like 1MPH (usually in the mornings it was slowest)
@jawgernaut01
@jawgernaut01 6 жыл бұрын
What do you two do for work to be able to afford so many jeep parts
@Abe.Wassenstein
@Abe.Wassenstein 6 жыл бұрын
Not enough heat. Ideally you'd want the temperature in that booth to be 25-30 Celsius.
@sasandabirian8768
@sasandabirian8768 6 жыл бұрын
You boys created Dexter's kill room lol.
@208miuwu
@208miuwu 6 жыл бұрын
Networking with with your paint and body friends about the paint question/issues FRIENDS HELPING FRIENDS we use it in the Navy all the time, I`m sure some people watching this do some paint and body work. *CONGRATS GUYS* always great videos.
@Baldybiddle
@Baldybiddle 6 жыл бұрын
When painting should put tape on the top edge of the can in a v shape it reduces spillage when pouring and drops down the side of the can
@jasonswift7098
@jasonswift7098 6 жыл бұрын
Keep up the good work guys. I think maybe the issue with the paint was too much humidity?
@f15tracking
@f15tracking 6 жыл бұрын
You guys doing great job. 👍👍
@ahussain17
@ahussain17 6 жыл бұрын
love your builds , greetings from dubai
@chrismartin5286
@chrismartin5286 6 жыл бұрын
What color is that blue
@jongass7799
@jongass7799 6 жыл бұрын
Great videos nice watching the channel grow
@jackknutel1083
@jackknutel1083 6 жыл бұрын
Can’t wait to see this jeep flex out
@cw2lido
@cw2lido 6 жыл бұрын
Love the color!
@matthewcaine5036
@matthewcaine5036 6 жыл бұрын
If it’s raining so hard why did you leave the Jeep with no top on?
@Palmerdsm
@Palmerdsm 6 жыл бұрын
Sheet. The trees are green and it's raining there. The trees are still brown and the grass is still white here...
@stephan8560
@stephan8560 6 жыл бұрын
Damn boys hope you guys figure out the problem with the paint. Thanks for anther great video! can't wait! ":)
@Brooklynraised68
@Brooklynraised68 6 жыл бұрын
The problem with the paint is the painters wtf it's raining freaking​. Bubs when it rains it's 100 % humidity
@stephan8560
@stephan8560 6 жыл бұрын
Luis diaz well we're all pros in less were doing it so unless your out there in their shoes step off bro
@tannonlortonii2405
@tannonlortonii2405 6 жыл бұрын
if i were you guys i would keep the white and blue jeep for cool rig setups
@joeshifvon7354
@joeshifvon7354 6 жыл бұрын
Looking good boys!
@Eddie_-_
@Eddie_-_ Жыл бұрын
Slight upgrade of the paint booth from 5 years ago
@dank6370
@dank6370 6 жыл бұрын
Another great video!
@Ervsdynamics
@Ervsdynamics 6 жыл бұрын
When degreasing before painting make sure to wipe the degreaser dry as you're degreasing parts.
@huntersnyder1924
@huntersnyder1924 6 жыл бұрын
just had surgery. was lookin foreword to thid
@AppMagnet
@AppMagnet 6 жыл бұрын
Love this channel!
@juanpalos3657
@juanpalos3657 6 жыл бұрын
New subscriber here... great job on your jeep project. Greetings from Mexico
@kenmorales4187
@kenmorales4187 6 жыл бұрын
You probably need a water separator in you air line to the spray gun
@briangray5921
@briangray5921 6 жыл бұрын
Those track bar/control arm is sexy as hell
@johnhoward4977
@johnhoward4977 6 жыл бұрын
If you guys ever need any concrete or framing help I can cruise down. I'm in East TN.
@goonzquad
@goonzquad 6 жыл бұрын
John Howard Sweet I’ll keep you in mind!
@honksgarage8084
@honksgarage8084 6 жыл бұрын
I would check the canister lid hole so it's not creating a vacuum in the gun. Happened to me
@guriashah5761
@guriashah5761 6 жыл бұрын
You should build the new hood for paint job
@memefeed2147
@memefeed2147 6 жыл бұрын
cant wait to hear her start up
@franciscopl4960
@franciscopl4960 6 жыл бұрын
Increíble video¡¡¡ los veo todas las noches saludos desde WISCONSIN
6 жыл бұрын
Where are you guys ? What state?
@cinemastic6872
@cinemastic6872 6 жыл бұрын
georgia
@tareksalah7103
@tareksalah7103 6 жыл бұрын
Hi
@clt13625
@clt13625 6 жыл бұрын
rossville it looks like, Im from lafayette
@noahtaylor3148
@noahtaylor3148 6 жыл бұрын
Chattanooga TN. thats where they are selling their jeep and craigslist,, and they are close to WCU, i saw thye had a sticker
@calebbennett6947
@calebbennett6947 6 жыл бұрын
Chattanooga
@danakibby627
@danakibby627 6 жыл бұрын
I’ve got a suggestion for your top on the blue Jeep! I have a mint condition 2door black s10 blazer and I took off my luggage rack, sanded the roof and painted the roof with black Flex Seal like on Tv. Put rack back on and now I can haul ladder etc. and it looks great. I used a 3 to 4 inch foam roller and edging with brush. This stuff is great!
@lasovejasdejehova
@lasovejasdejehova 6 жыл бұрын
Good job guys enjoy
@elmonteslim3711
@elmonteslim3711 5 жыл бұрын
G'day Mate..love the your here in Australia
@kraken9189
@kraken9189 4 жыл бұрын
whats the paint color?!!!
@jeremypace643
@jeremypace643 6 жыл бұрын
How did you fail? Oh sorry that was a weird question...
@jeremypace643
@jeremypace643 6 жыл бұрын
As soon as I post this I got a heart? Wow
@goonzquad
@goonzquad 6 жыл бұрын
We have to redo it
@jeremypace643
@jeremypace643 6 жыл бұрын
Oh, ok
@jessicabradley6537
@jessicabradley6537 6 жыл бұрын
you should do a Q&A
@goldcoastrob984
@goldcoastrob984 6 жыл бұрын
Guys you need jack stands under the Jeep when your working under it be SAFE
@johnbates5389
@johnbates5389 6 жыл бұрын
Video up for 32 mins and already 2277 views! Great job guys!
@gtowncasey111
@gtowncasey111 6 жыл бұрын
Love your vids but you guys are going to hate those Heims on the steering. Should have went with a Currie steering.
@ivanrosas6023
@ivanrosas6023 6 жыл бұрын
Keep it up guys
@justinkirkland7149
@justinkirkland7149 6 жыл бұрын
So early get to watch it in 144p!
@donjuan1212
@donjuan1212 6 жыл бұрын
Use jack stands for safety
@pvnugget
@pvnugget 6 жыл бұрын
Rookie mistake never paint when it’s humid or raining outside if you don’t have a real booth, other then that good job guys 👍👍
@coinsandheartpieces2791
@coinsandheartpieces2791 6 жыл бұрын
On that notification gang!
@toddandrews6352
@toddandrews6352 6 жыл бұрын
to wet to be painting man
@mmanut
@mmanut 6 жыл бұрын
Enjoy your channel guys 👍 Vinny 🇺🇸
@bobbya4579
@bobbya4579 6 жыл бұрын
Awesome!
@dimitarpetkov7068
@dimitarpetkov7068 6 жыл бұрын
Enjoy your channel gays. All the best from Bulgaria.
@mikerobbins5049
@mikerobbins5049 6 жыл бұрын
You’ll get it straightened out .... just a minor setback..
@nasution440
@nasution440 6 жыл бұрын
please make a more longer video..
@roberttalmage4517
@roberttalmage4517 6 жыл бұрын
Hey goonzquad if you ever want to sell the wheels that are on the blue jeep I would love to buy them I have a 1998 jeep Cherokee and I've been looking for those exact wheels. please like so goonzquad reads this
@goonzquad
@goonzquad 6 жыл бұрын
Robert Talmage I’ll will let you know
@bryanmartinez8191
@bryanmartinez8191 6 жыл бұрын
Great content !!! But please don’t become a click bait channel
@larrysnyderthecandorealtor
@larrysnyderthecandorealtor 6 жыл бұрын
It's like anything else your either born with that skill or not. But after you screw it up don't expect someone to correct it cheap.
The Beast Is Alive!!
12:01
goonzquad
Рет қаралды 232 М.
REBUILT Jeep First Test Drive!!!
10:02
goonzquad
Рет қаралды 185 М.
The evil clown plays a prank on the angel
00:39
超人夫妇
Рет қаралды 53 МЛН
The SIMPLE Trick If You Don't Have A Paint Booth!
13:47
Paint Society
Рет қаралды 3,7 МЛН
Bigger Engine.
2:03:51
SimonFordman
Рет қаралды 315 М.
Color Matching The Jeep Hardtop
9:26
goonzquad
Рет қаралды 104 М.
Getting So Close!
11:29
goonzquad
Рет қаралды 54 М.
The Jeep's Clutch Blew Up?!
11:27
goonzquad
Рет қаралды 441 М.
The 1st Body Shop Failed; How I FIXED Their Botched Repair!
18:15
Paint Society
Рет қаралды 58 М.
Rebuilt Rubicon Gets Best Upgrade Yet!
11:05
goonzquad
Рет қаралды 319 М.
Rebuilt Rubicon Gets New Mods!
13:51
goonzquad
Рет қаралды 215 М.