WE SLAP A BLOW OFF VALVE ON A DIESEL and IT WORKS Part2

[@mahadkhantanoli8203]

Great work mate 👍

[@GREASEGARAGE]

Did that explain everything? you should be able to do it to your mitsubishi now yeah ?

[@biggles110]

Great stuff👍 I have a similar setup, but instead of a microswitch, I created an adjustable controller (timer etc) using a programmable digispark clone hooked into the APP sensor. I also incorporated a disable switch for "stealth" mode 😎

[@GREASEGARAGE]

oh i like that, have you got a link my good man ?

[@biggles110]

@@GREASEGARAGE unfortunately no :( i didn't document it.

[@GREASEGARAGE]

@@biggles110 bugger, would be good to pass the info on

[@brentmcd12]

Go the Patrol! 🛻📹🤙😎

[@GREASEGARAGE]

thank you mate, my bro is thinking of selling it.. i reckon he is nuts 🥜 , cheers 🍻 for the comment

[@jawdz4956]

Awesome 👌

[@GREASEGARAGE]

thank you mate :) getting some serious hate for this mod .. cheers for the support:)

[@dunyip6691]

My d22 Navara also has a zd30 in it but no intercooler, do you guys reckon I should chuck an intercooler in it for this or is it doable without one?, On a side note I love the sound that BOV is making on your patrol, sounds awesome

[@GREASEGARAGE]

Hello Dunyip , great question 😃you don’t need an intercooler for this to work, you can use a silicone tee piece to add the bov on to the piping , and then you don’t need to do any welding, and i’m glad you liked the project and the sound

[@betelbug]

Hi, i’m trying to figure out the schematic using the electronic dump valve instead of the solenoid valve. Can you guide me on this? The yellow wire supposed to be connected to the throttle pedal (5v), i’m using throttle cable, so the yellow cable goes to the micro switch. But the vacuum valve not opening up. Any idea?

[@GREASEGARAGE]

i’ll look in the morning mate, so i can give you the right answer

[@betelbug]

Thank you mate.. i’m trying to hook this to my land cruiser 3L engine.. your video is really helpfull

[@GREASEGARAGE]

do you have a link of the part?

[@GREASEGARAGE]

www.compbrake.com/product/universal-electronic-turbo-diesel-blow-off-valve-dump-valve-black/?v=6cc98ba2045f

[@GREASEGARAGE]

Answer Knadzmi :P So the yellow wire is a sensor wire, 0volt is needed when "accelerator pedal in its natural position " as you put your foot on the accelerator and press on it, the yellow wire is mean to be receiving a voltage change E.g "half throttle" 2.5volts " Full throttle" 5volts. if it doesn't see that the computer in side the black box will not send 12volts to the solenoid, meaning your BOV isnt going to open. So a micro switch isn't going to work, so you could get a Mitsubishi TPS , and try and connect it to the accelerator cable of you are putting it on a older diesel vehicle, if its a newer vehicle you might be in luck, there is a change your throttle is an electric accelerator pedal.. so you'll be able to tap into a 0-5volt sencor wire

[@robertpattinson2068]

Love it

[@GREASEGARAGE]

Goes pretty good for a Nissan 😅

[@GREASEGARAGE]

not as cool as your LS build

[@mgpvader123]

Sounds like a subie haha

[@GREASEGARAGE]

blahahahahahaha 🙈 Oh no that wasn’t the plan

[@jedsoutlook2810]

Could this work by putting your micro switch or a proxy switch to your throttle cable

[@GREASEGARAGE]

any trigger will work, that’s the best thing with a solenoid, you just want the trigger to be active for 1~2 second , so I would recommend a timer, so when the throttle petal returns to 0% the solenoid is activated, but then the connection is closed by the timer, and when the throttle is repressed, it resets,

[@phetchatchapong9955]

Relay?

[@GREASEGARAGE]

hey mate are you asking what a relay is ?

[@phetchatchapong9955]

@@GREASEGARAGE Type of Relay?

[@GREASEGARAGE]

www.archerbatteries.com.au/relay-12v-4-pin-40a-r-bl-1?gclid=CjwKCAjwrpOiBhBVEiwA_473dJ-L58u_2TSMqQOugSYt6xpS0TFuqY9vkg5wv52WtUHBOCVnyzbFzxoChvIQAvD_BwE

[@GREASEGARAGE]

hey Phet see if this helps

[@phetchatchapong9955]

@@GREASEGARAGE tks

[@PitFighter2007]

this could be achieved by blowing a pea-whistle ffs. 🙄

[@GREASEGARAGE]

yeah that’s no we’re near as cool as

[@Mudhunters90]

❤❤❤❤🇳🇿🇳🇿🇳🇿

[@GREASEGARAGE]

Thank you Mate , back at ya

[@Mudhunters90]

@@GREASEGARAGE give some prado 90 series modifications mate

[@GREASEGARAGE]

@virajmadusanka1236 i’ll see what I can do for you

[@Dwaynesvideodump]

shame it sounds so stupid haha. should try getting a better sounding one aha

[@GREASEGARAGE]

If it was my car I would be up for trying different types, but the owner “liam” loves it.. at the end of the day it’s personal preference , we be cool to stick a duck whistle on it, and record peoples reactions