We upgraded our rear sprocket ⚙️ on our motovox predator 212

[@michaelstarr5861]

I switched out the front forks between my old school doodle bug and my Motovox. The Doodlebug needed adjustable bars because it's not long enough for a 6'2" guy with the stock bars. But the longer Motovox still has plenty of room with the Doodlebug bars, because The motovox head tube angle puts them more forward at the top.

[@Bearclone]

cant wait to see this thing true top speed

[@motoprosvtp]

Soon brother I’m deleting the governor and upgraded the carb set up it’s going to Scream 😱

[@astridperez1812]

Good shit bro like how you conduct your video

[@motoprosvtp]

Thank you 🙏🏽

[@JacobHicks-e6n]

Useing lock tight is a habbit for me to But i don't use the blue stuff😂

[@motoprosvtp]

As long as you use some kind

[@brokenspoke4149]

The blue is better

[@ShawnMurphy-hg8ib]

What is your front sproket and where can I find that 60t sproket?

[@619Necio]

when i put on a smaller sprocket does it give less torque because i need to lower the torque on my mini bike because it pops up very easily

[@McKnightBlade]

Yes, could even go to a 40 or 50 tooth if you really want to tame it down.

[@robertomoreno5526]

What's the full info on that sprocket you put on and also the chain I'm also trying to up grade my motovox mbx10. . Nice video.

[@motoprosvtp]

Just a 60 tooth 35 chain sprocket we’re you can order off anywhere and 35 chain

[@robertomoreno5526]

@EnviousRepairPerformance thank you so master. .you are a blessing 🙌.

[@motoprosvtp]

Amazon has the sprockets and chain

[@MotoVoxDawg420]

I have a 40th sprocket otw i should make a video on it

[@motoprosvtp]

A 40 on the rear that’s going to be really tall gears and a very slow take off

[@NickDrinksWater]

can i use a 60 tooth rear sprocket without the chain having issues staying on? i was assuming since its smaller, id have to make a custom chain tensioner of some sort, which has made me hesitant in putting mine on

[@motoprosvtp]

You just cut your chain shorter and if your chain comes off your bike or sprockets have alignment issues

[@thegreatpatsy]

Wouldn't a larger sprocket yield a higher top speed? Figured it would be the same as a 10-speed bike or the transmission of a car. Larger the gear, higher the top speed. This concept to me is like putting a low gear in place of a high one.

[@motoprosvtp]

No smaller gear on the drive wheel higher speed bigger more acceleration low top speed and the front sprocket is lower the gear more acceleration higher more top speed

[@kirbylee57]

It is the same as a car. If you go from a 273 gear to a 411 its going to have a lot more low end power, but will be turning some higher rpm's at 50 and up.

[@motoprosvtp]

Yeah same concept

[@contraband1543]

You don't understand the difference between the driven and driver sprockets.

[@thegreatpatsy]

@@contraband1543 Uhhhh. There is one sprocket on a mini bike, just like a bicycle. smaller the gear, more torque less speed and on. It's not rocket science but apparently people think backwards nowadays.

[@nakiasmith7256]

What is the center measurement on this?I’m trying to find this exact sprocket.

[@motoprosvtp]

This is from omb warehouse www.ombwarehouse.com/60-tooth-35-chain-aluminum-sprocket-fits-db30-motovox-ct100-p5349.html

[@rrossadillo]

Sounds like you need some carb tuning there bud

[@jocielsoto8574]

We’re can you get those sprocket bolts at ? I bought a mini bike but it was missing4

[@motoprosvtp]

Amazon

[@noahschulze2053]

Where did you get the tires from

[@motoprosvtp]

Sunf tire 🛞 order them online on Amazon

[@Mr.swifty..]

Help me find them I can’t anywhere 😢😢😢

[@motoprosvtp]

They are everywhere

[@elmexicanitonieto6475]

Can You help me with the especifications about number of sprocket !!!! Please

[@motoprosvtp]

What you need Help with ?

[@botzayvier1492]

How do yall make a stock go fast besides governor

[@motoprosvtp]

Sprocket Change

[@erickpardo8097]

How many inches is the whole in the middle

[@motoprosvtp]

Not sure but Omb wharehouse sells the correct one

[@erickpardo8097]

What kind of bike is this

[@erickpardo8097]

I did a 212cc swap from. 49 cc and I need help with the sprocket

[@motoprosvtp]

Motovox minibike

[@jakedrew7365]

How many teeth on the clutch?

[@motoprosvtp]

12

[@chelseacarrillo7901]

I do free governor removed in Cali to anyone

[@motoprosvtp]

Cool

[@kirbylee57]

At first I think you said you were going to from a 75 tooth sprocket to a 65, then a 60. At the end, I think you said you went to a 60, and only gained 4 mph. Did it quit trying to wheelie as bad with the 60t/65t?

[@motoprosvtp]

It only gained 4mph more becuase we were limited to engine rpm on a stock governor motor

[@motoprosvtp]

And wheelies stopped

[@kirbylee57]

@@motoprosvtp I changed from a 75 to a 65 two days ago. Significantly faster top end, still good bottom end acceleration , and that front wheel still trying to come up. If I wasn't paying attention to it it would have flipped me on my back. It did twice in my front yard. A little embarrassing . How are you finding how fast your going?

[@motoprosvtp]

With a app on my iPhone that I have for speed

[@motoprosvtp]

GPS speed

[@Frogonalogssssss]

if this a motovox mbx10 minibike with a stock rear rim could you reply with the link of this sprocket if it fits #35 chain please and thank you and if this is a 212 i got a rt200 mini bike with a stock 212 predator engine and its straight chained it goes 65 70 i weight 140 all i did was take the throttle screw fully off and out if you have not taken it out already try it

[@motoprosvtp]

You get the sprocket from ombwarehouse

[@Lordkamui998]

What brand sprocket did you get yours from? Do you have a link

[@motoprosvtp]

Amazon 60 tooth sprocket

[@anthonyreddy2834]

So it's a stock 212?

[@motoprosvtp]

That motor yes still governed with a carb and pipe

[@kylesyx8432]

Do you like your tires ? I have those cheap ass Wanda “tractor” tires and they suck. Yours look definitely street tires But I can’t find any good tires. Any advise? And what happened to the 65 tooth ???? 75- straight to 60? You should have gained a lot more than 4 mph from75-60 Changing to a 65 will get you about 4-5 mph

[@motoprosvtp]

Yeah I have sun f tires they work perfect and yes it will go way faster but the motor is completely stock governor in tact so it revs out fast without the governor it would pick up more speed

[@motoprosvtp]

Look up 145/70/6 that’s the tire size

[@elijahkeeper636]

You need heavier valve springs

[@motoprosvtp]

It still has the governor so only revs to the same amount

[@motoprosvtp]

Not a valve spring problem

[@BenjaminHollingsworth-e4m]

Lower the rear sprocket teeth like an 42 tooth

[@motoprosvtp]

Engine don’t have the power to pull such a tall gear with the big wheels

[@cls_alex13]

How many teeth on the clutch?

[@motoprosvtp]

12

[@cls_alex13]

@@motoprosvtp thanks man