Weak Acceleration? Solution! Cleaning the Throttle Valve on Mercedes W211 M271 Engine

[@arturaspf2566]

I also suggesting porting and polish these throttle bodies and cut off protruded bolts. Performance gains are amazing without any bad a/f ratios. About 10nm and 5 kw gain easy mod. And torque at low rpm is amazing, kicking neck to the seat amazingly and maximum torque comes from 2000 rpm instead 3000. This is most insane mod for these cars and ecu compensate fuel really well.

[@thepio14343SWEG]

By cutting off protruded bolts, what ones do you mean? And after porting & polishing isn't the valve flap going to let extra air through on idle, resulting in high idle speeds?

[@arturaspf2566]

@@thepio14343SWEG the is marked specify area, which you cant port :)

[@thepio14343SWEG]

@@arturaspf2566 I had to look at other videos. Now I understand it, so you just port the intake side tube but what sid you meam by cutting off protruded bolts in your comment?

[@chanthoeurnnhoem3781]

My car C200 year 2004 compressor, if drives fast speeds, it's run well, but on turning and park or slow speed, it weak, do you have experience with this issued?

[@NokiaHumanForm]

If only it was so easy to access the throttle body of the M112 lol

[@ManixMAR]

On apprend un truc à chaque vidéo. Merci infiniment ❤ ❤

[@AmazingRoad]

[@edgargoicoechea6217]

My c180 week power And scanner had no codes any idea Could be the kompressor ???

[@muratkaynar802]

It looks clean, did it any difference?

[@BC2FITTY]

Thank you for this video brotha, this is next on my to do list ! 🤙🏼

[@AmazingRoad]

[@OhhBoyItsUrMUM]

What if it was cleaned a couple days prior and is still weak, but it’s only at low speeds like 5 -20 mph but once you get to 40 it’s accelerates fines, at 60 miles sounds completely fine and drives fine , what could be the problem.

[@XanTim]

Турбина или компрессор

[@opip23-]

Thank you so much for this video👏🏻🙌🏻🙏🏻

[@AmazingRoad]

[@henrymaterla4709]

SUPER VIDEO!Th.Henry.

[@AmazingRoad]

[@alexekb196]

Спасибо большое за четко понятное видео, очень помогли! Подскажите, m271 когда едешь давишь на газ машина начинает дёргаться, свечи с наконечникоми поменял стало лучше а всё ровно дёргается. А еще горит на приборке ESP, чек не горит. Когда газуеш на месте все четко не троит не чего а когда едешь начинает дёргаться екарный бабай не знаю что делать дальше. Помоги а

[@ЛексТар-н7э]

Братик, если к этому времени решил проблему, подскажи как?👍

[@alexekb196]

Пока ещё нет...

[@Ilona_230]

У меня такая же проблема 😔 А код горит какой то у вас???

[@hshalaby90]

Amazing video, thank you 🥳

[@AmazingRoad]

[@eduardoa4558]

Does it give error P0171 if the throttle is malfunctioning? Tks

[@Juljan-nc4cq]

Yesterday I wanted to clean the MAP sensor of my car and I saw that the pipe that connect to the MAP sensor was missing. can you help me with any information? I have a w203 c180k m271

[@Flankerski]

Cool video, thx. I see that you are at 300.000km, have you ever changed the timing chain on this car? Spasiba balshoi.

[@__Yusuf63]

Most likely but if you keep your car well maintained and oil changes before time you shouldn't have a issue

[@HappyAlexandros]

Why wait 90 sec?

[@lukagulbani9539]

процедура сброса будет такой же и для w204?

[@haruntokdemir]

Acaba soğukken düzgün hızlanmayıp, sonra 2 çıt devir kaybı ile birlikte öne fırlama problemine çözüm olabilir mi?

[@romanshevchuk5748]

Нет это все пиздешь

[@haruntokdemir]

@@romanshevchuk5748 Sory. Can you write english format?

[@oguzhangunen6973]

This problem.Kub ventil

[@haruntokdemir]

@@oguzhangunen6973 Hayır. Bu başka bir şey. Yine de TCC Selenoidi reğiştirdim, sorun aynen devam ediyor.

[@oguzhangunen6973]

Tam olarak tarif eder misiniz,benim cok canim yandi,kub ventilden cikti,degistirince duzeldi

[@PanosGr44]

I have a M271 with 722.6 transmission, the car accelerates very slowly from 0 to 10km/h even with full throttle. After reaching 10-15 km/h it accelerates just fine. I've cleaned both throttle bodies and the issue remains, the car hasn't any vacuum or intake leaks. Is it transmission problem or engine problem? Any ideas?

[@mac4boys541]

Starting off in 2nd gear?. Is the trans in W or S. put it in S then do a transmission readapt. Very easy plenty of vids on youtube

[@i.zahariev9378]

@@mac4boys541 Дебитомер!

[@Aurash333]

Mulțumesc!

[@Lord-of-Nitro]

А на турбированном 271 она так же снимается?

[@samobabl4845]

Mersi axper jan

[@AmazingRoad]

[@ITaf_HermQ]

Can i clean using WD40?

[@iraklitsetskhladze7110]

здравствуйте у меня есть маленькая проблема. я живу во франции я не знаю хорошо французский язык и я не могу объяснить мой проблема французский в гараже. я бил русскоговорящий в гараже но не нашли ничего. мне советовали заменить свечи я заменил свечи но проблема не исчезал. говорят возможно проблема есть форсунки что какой-то форсунка думает поздно. это проблема появился 8 месяц назад. у меня есть автомобиль мегседес W212 E350 и у меня такая проблема на холодным спуске первые 40 секунд автомобиль как то прыгает чуть-чуть плавают обороты после первый 40 секунд всё работает в норме не показывает никакой ошибки. если у вас есть какой-то мысл чем проблема пожалуйста напишите ваши варианты спасибо вам заранее это происходит когда двигатель холодный если я прогреваю автомобил на рабочем состоянии утра вечером нет никакой двиоргании.

[@wilhelmschkalej7912]

Danke

[@AmazingRoad]

[@ДимаМарров]

На дизельном 2,1 x204 производится чистка дроссельной заслонки ?

[@AmazingRoad]

На дизеля нет дроссельной заслонки

[@yamaha6374]

​@@AmazingRoadесть!!!

[@sikuben6634]

Thx friend the best

[@AmazingRoad]

[@ВячеславБелинский-к9й]

Красавчик!! 👏👏🔥🔥✌

[@AmazingRoad]

[@alestro345]

Разве это грязная заслонка? Не было необходимости её чистить.

[@AmazingRoad]

Там масла из за турбина

[@TADRuble]

Спасибо

[@AmazingRoad]

[@matthewkk5087]

is that diesel?

[@AmazingRoad]

No

[@whlawson5812]

Getting this car would need someone who, would at least, make it as a spare time hobby to keep it in good running condition. Then it is a win-win for the car & owner! 😅😅😅. Try taking out the old PCV and replace the old PCV with a metal barb connector with smart clips. Relocate the new PCV to, as near as possible, to the air intake manifold. Then PCV can be check during engine oil change. PCV in a supercharged engine has another critical function which is preventing the +0.5barg of air pressure from going into engine crankcase whenever supercharger is engaged. Buy a dipstick of 590 to 600mm even if not original. Reportedly there is one guy who had put in 8.5litres of engine oil as the in dash monitor kept giving an indication of insufficient oil level. The dipped engine oil level before starting the engine vs another dipping at 2 to 3 minutes after starting the engine & engine kept running is a drop of 20mm of oil level. Regards.

[@ashottatevosyan5895]

Развод клиента на бабки! Сразу 125лс прибавится!

[@AmazingRoad]

[@car.gems.]

that wasnt even dirty, mine looked 100x worse and was running just fine

[@Исма-д6ъ]

Не чего это все мне не помогло , как нет тяги так и нет 🤦🏻‍♂️

[@mksuro]

Спасибо 👍🇦🇲

[@AmazingRoad]

[@ashiksahakyan2230]

👍👍👍

[@AmazingRoad]

[@parvizagayev5960]

ну там же ничего не было?

[@AmazingRoad]

Масло

[@sibler5379]

👍👍👍👍👍👍

[@AmazingRoad]

[@Danila_Angarskii]

👍👍👍✌

[@AmazingRoad]

[@wilhelmschkalej7912]

Красавчик 🤝👍

[@AmazingRoad]

[@kamsar8849]

Спасибо

[@AmazingRoad]