Weapon Thief EXPOSED! Blacksmithing Gone Wrong in Medieval Blacksmith

[@MyIrishWhiskey]

The moment the ore starts melting the quality goes down, so if you dont remove it from the furnace quickly it will be worthless. The lathe doesnt improve the sale price, but the hilt decoration before you assemble does. You can get ore for free from the mine, the mine is to the left outside your shop, there is a sell price when you design the weapon so you can see how much its worth. Merry Christmas

[@widowmaker7831]

You can also immediately drop the crucible in the water to cool it down right after pooring to save the quality of any left over ore in it.

[@realdragon]

Honestly lathe should increase sell price even if it's a little

[@jort93z]

Man, i hate people commenting without watching the video. He knows the quality goes down when he leaves it in the furnace, he literally commented on it in the video.

[@benthedaddyYT]

Lathe does increase price by a little

[@person1171]

@@widowmaker7831 He does this in the video

[@dragonboss6454]

dude watching him play this game is like watching those ads that do the wrong thing to get you to buy it

[@ChopperGreg]

I really like this game and bought it myself, and like watching others play it…but good lord. How long can you bumble around not knowing jack shit about the game you’re playing lol

[@AkaKillerwolf]

@@ChopperGreg XD

[@xperia5295]

lol I was thinking the same thing, real hard to watch, love Drea but DAMN man

[@landolockss]

Dude exactly. This dude has found a way to piss me off 😂 why can’t you just take 30 fucking seconds to look it up and figure out how to actually play correctly??

[@Rowgue51]

At this point it's pretty clear that he's playing stupid because it drives engagement with everyone commenting about everything he's doing wrong. It's become his gimmick and it works so he keeps doing it and keeps being more and more obvious and over the top with it.

[@Saitama-plays]

Drae REALLY needs to read the comments. As you look at the metal bucket, it shows the ores ACTIVELY going down in quality

[@GordanFreeman420]

Drae read? Nah never

[@jort93z]

Yes, he knows, he commented on it in the video. watch the video first before hating. His 0% issue is because he overheated them, not all of them are supposed to be heated to 2000°C. Some melt earlier.

[@SatanicDemiGod]

Believe it or not, most people that play games actually enjoy the process of learning the games themselves, and he may be intentionally not reading the comments as they would completely ruin the fun of discovery

[@fortyfukinseven]

He's a KZbinr. He records several episodes at a time. He's probably read the comments, 12 episodes in

[@Saitama-plays]

@@fortyfukinseven 😭

[@zaliath]

Drae, you need to pay attention to the parts themselves that you attach. each blade piece has its own individual cut/pierce modifier. by adding some of the jagged blade edges, you could easily get the >= 20 cut rate. you just needed a different blade other than the perfectly straight pieces, and as you saw in the editor for the blade after all the pieces where you move/bend it. you can give the blade a curve to further spike its cut rate even higher at the cost of pierce. just pay attention you don't go too far and get the negative penalty from moving its blade body tooo far. stats always actively update before confirming the blade for craft (pay attention to top left corner where pierce, cut, and smash rate are after every little change). you can guarantee it'll be >20 before even starting to work out best ore for the blade and best wood for the handle. To see the stats, make the blade itself first then add handles after as a 2nd part. the handles will modify your cut/pierce rate (bigger handle = better pierce) on top of type of material as i'd already mentioned will drastically affect the stats too. Lastly the customers requirement of a certain amount of pierce,slash, or smash IS the amount you see on the stats. its just differently worded to say damage instead of rate Completely separate note: your alloy's being 0% when crafted, some alloys have a specific recipe to follow! as one ore has a higher cook temp than another which degrades the quality! your shops have one that sells books that has info on alloys and their temperatures, so to really get into alloy making you need that

[@averagecapybaraenjoyer1]

Like why did he think 22% = 20 cut rate/damage? It's 22% BONUS cut rate, so if your cut rate is 1 you will have 1.22, basic math lol.

[@Very_Grumpy_Cat]

​@@averagecapybaraenjoyer1 yeahhh, this is drea

[@averagecapybaraenjoyer1]

@@Very_Grumpy_Cat I know but it's so frustrating when he just won't read anything and then complain that he doesn't know why something happened 😭

[@Very_Grumpy_Cat]

@@averagecapybaraenjoyer1 yep. I feel the same

[@tannerrinker5499]

Drae, brother 1st after the metal gets to the melting point it starts decaying. If you pour it and then cool it off in the trough you can remelt and use whats left. 2nd it's absolutely worth going to the mine and finding ores. You can even find alloys there. 3rd if you buy handle wraps you have an unlimited supply of the type you bought.

[@jeorgenespereira7430]

The reason your ore quality keeps getting low is because they have a right melting temperature, you can look them up on the book. Also to make alloy there is a right way, otherwise they turn to 0%, you can find the right metod by buying a book about alloys on the city

[@un.raven1]

Drae, this has been some fantastic advertising, I’ve never been more personally infuriated with someone else play that it’s convinced me to buy the game myself 😂👍 New sub earned

[@sneakydee4581]

Merry Christmas, I am having a good Christmas but feeling depressed. However, when I got home, I knew I had a Drae video to watch and I said this would cheer me up. It did and more, as always you never seem to disappoint. Thanks for all your videos, They are part of my everyday routine and I appreciate you, your videos and your community. All the best and I hope everyone has a great new year.

[@TheMegaOnyx]

The reason you dont get things, is because you dont allow yourself getting learned... That guy wanted a +20 cut dmg weapon, so the moment you fiddle with the blueprint(jUsT bEacUsE iT lOoKs CoOl) you forget there is a side-effect for doing so... If a customer want a basic standard dagger, you do it, so only do mallweaponry in your sparetime...

[@Justuravgolfer]

you can mine ore if you go to the left when you leave the shop

[@Core-1948]

I need about 100 episodes of this to binge

[@metern]

@drae You forgot that you have to design the handle before using the lathe. After designing the handle, you get a "shaddow" showing where and how much you have to remove, and the shape of course 😉.

[@joboyeleven]

I’d recommend looking at the library and getting some of the books, such as the one about mastering alloys. I’d also recommend checking out the mines by turning left after leaving your house.

[@dragonboss6454]

one thing I learned from a book in the game is how the pob affects the price/cut rate. If the pob is near the handle like a rapier or dagger the pirce rate goes up. If the pob is closer to the top of the blade like and axe or heavy it has better cutting rate.

[@dragonboss6454]

Pierce* not price

[@BrianHorovitz]

You can mine ore for free outside of town, also the quality of the ore drops the longer it is hot so if you drop the melting bucket in the trough and cool it you can re heat it later for use, the leather and other handles wraps are a one time purchase to unlock it is not a consumable so the price is not as bad as it seems and adds to the price of the blade

[@karlo0983]

Im so happy this is turning in to a series

[@sanchitory]

Drae this is the current best series on your channel, i hope you can do 2 episodes a week on this rather than one, we would really appreciate that.

[@landolockss]

Yeah maybe if he actually figures out how to play the game first

[@Altair1243WAR]

Good luck with that. I'm not even a blacksmith or work with metal and I know more than him. Honestly, he could solve a lot of this by just looking up actual forging for like half an hour or something, rather than bumbling around and guessing all the time.

[@patrickabdalnour1950]

I’ve been waiting for this episode!! Plz continue playing this game… don’t just stop I’m invested

[@KainyaCaden]

I got the game after watching your last episode and have been playing it a good bit. A few tips: I make the Pummel and Hand Guard out of Copper and the Blade out of Iron to save on time and money. I also pour a few blades and other necessities while the pot if full. Also Pour Blade only, drop next to mould and keep pouring more blades as you can't over heat the ore on reheating the blade. Oh, you can also afford a lathe and quenching barrel at the begging and your weapons are worth more if you do... Edit: Oh it says the "Cut and Piece" damage on the left panel, Not the "percentage" Cut and Piece" damage in the Blueprint... Also there's a percentage when Ore begins degrading as it starts melting and when you make Blueprints and use different ingredients Love your vids Drae.

[@PFCIceman]

Merry Christmas to all. Hope y’all have a great one.

[@General_Madness]

24:39 “I can’t cancel” Me looking at the very obvious key bind in the corner 😭 😡

[@ImmaculateOtter]

This happened multiple times this episode. A bit frustrating tbh Edit: I counted four times he said, “I can’t cancel” while there was a prompt saying you could cancel with a right click.

[@Dzyan]

You currently can't, hitting right click doesn't do anything, that one isn't on Drae

[@ImmaculateOtter]

@@Dzyan Ah, so it’s a glitch. My bad for assuming incompetence.

[@conroygreyfin7011]

@@Dzyan That's not true. The cancel is used to cancel a current hit. Meaning if you overpower a hit you can cancel it (but you have to hold the right mouse button while letting go of the left mouse button) There is no way at the moment to back out of the assembly stage once it has started.

[@Caleb.DesRoches]

You gotta look at the top left when you are building a weapon to see the actual cut rate. The cute rate bonus is a percentage added onto that top left number.

[@deancantrell7873]

Drae, Look at your book and the melting temperatures for each ore. The furnace doesnt need to be 2000c to melt everything. Youre melting some of the ore quicker than others and by the time you reach 2000c, its already burned ore

[@backyardmechanicrestoratio6958]

Merry Christmas Bro have a great day hope alls well and good with you Ps thank you for putting smiles on peoples faces keep it up

[@Artix117a]

thank you for inspiring me as a creator Drae. also thank you for getting me addicted to this game as i didnt even know it existed till you made a video on it but as a blacksmith i love the chance to do it in a game and its pretty close to reality which is nice. obviously they gamified it here and there but its a good change and lots of fun. i may not be the best creator but you reminded me that i should have love for what i do cause i love this game and making content. thank you so much and merry christmas or whatever you celebrate i hope you have a great rest of the month and a stellar new year. you rock!

[@Dzyan]

Your ore is scorching instantly because you have the temperature of the forge maxed out, you only want to go just above the melting point of the ore. The farther above that you are the faster it burns.

[@hibiki_rei]

Merry Christmas everyone! I waited for this video so bad, glad it's finally here. I'm having fun today.

[@dragonboss6454]

look in the book about ore quality the main reason your blades are considered junk is not due to your ore it is mainly about how you smelt the ore. In the book there is a table of all the ore's melting temp you wanna keep it in that range or the material rates will drop like crazy. Dont keep the furnace on at 2000 you only need high temps like that for certain metals.

[@ig.gui_s]

Happy christmas! This serie is pretty cool, bring more!

[@seanfarley1758]

If the bucket is hot enough to melt the ore, even if the bucket isn't in the forge, it will melt it down and begin the quality degradation. I've been always starting with a cold bucket and use the skill that let's you know when the ore is boiling. Also, check the mine bro you can get free gold from mining and make some real money with gold weapons!!

[@shane6585]

@2:22 you can see that there is still RAI ore in the bucket. You just let the temp get too low and the ore re-hardened

[@Kaibiin]

READ THE BOOK! It has charts for not only for weapon types but also MELTING POINTS OF ORE! So your reason for ruining your raw ore is that you are simply RUNNING THE FORGE TOO HIGH for the metals you are smelting down to pour into the mold so try to never go over 50 or so degrees over the required temp or else you'll run into problems with ore quality degrading quickly. Also you can see the "Damage" on the breakdown of the weapon on the left hand side of the planner, it's just called "Cut Rate" "Pierce Rate" and "Bash Rate". Another fun thing you can do is mix-n'-match components like a iron blade with a copper guard and pommel. You can also make a backlog of components as the kids will put things away (Except full Weapons), Handles back in the wood piles, Guards and Pommels in the chest, and Blade/Heavy Weapon parts on the small crate across from the chest. The only thing they really trash if left on the ground is fully made and put together weapons. You can also go left after you leave the shop to find the gate to the pass where you can go out mining to get your own ore and coal.

[@benthedaddyYT]

Check melting temps. You can lathe spear handles but they should be straight. Wood that hasn't gone through lathe equals lower sell price.

[@morganbryant2945]

Drae really needs to go to the mines with those alloys, he put 600 gold worth of ore into 1 spear for 900 without all the other costs, he isn't profitting enough just buying ore

[@hunter3v3v]

Would definitely love to see a series out of this game, it's pretty cool!

[@nolanLoc99]

Melting point. Melting point. Melting point Melting Temperature for ore in the book. Read the books. You don’t want to overheat your ore Mine your own ore as well

[@RodneyBrowning]

Hey Drae: going to mine your own coal and ore makes everything so much easier. It got me a lathe before I got my first special request. Takes time, but it makes it worth your while to have free ores in your workspace! Also, be sure to check on the melt temps for your ores when you're putting them in. You don't have to have the furnace constantly burning at 2000 and wasting all your fuel.

[@bafon867]

Do check out the smelting degrees in the book, as a metal that is way above that point will deteriorate at a fast pace once melted. Do check out the mine to the left when you exit the forge, there are two guards at a gate there, it leads to an area that can be mined for free. The magic bottles seem expensive, however they are a 'one-time' purchase, you only need to pay once. Same with the leather merchant, you buy a type of leather for coating the handle at the assembly station. Good luck and happy smithing.

[@realdragon]

In blueprint on the left you have "Cut rate 6.25" and you get additional 1.35 this is that 22% bonus from that 6.25

[@Bored_Nerd]

There are certain temperatures for each alloy. There is a book on the planing table that shows the temperatures. Also, if you go directly left out of the shop there is a mine past the town guards. If you follow the path down and to the left there is often free gold down there.

[@possiblyawarcriminal9358]

Love the series! Hope you keep up the good work, despite the frustrations!

[@maxdon3129]

First off happy holidays. And since most people are already telling you about the pre I’ll tell you about damage. Don’t pay attention to the top numbers on the blueprint look at the left side. Also you can go mine your own ores just go past the gate to the left of the smith as you leave the building. Collect gold at the bottom of the hill that’s how you can make money

[@kevbopwns]

Merry Christmas Drae, thx for giving us all the gift of a video today

[@giant4527]

In case you didn't know, the gate next to your house takes you to the mines where you can collect ores and coal for free

[@zepoxandy5602]

Game Tip: go out your shop and take a left, it will take you to the mines, look for gold and make some masterwork gold weapons, should take care of your money problem :)

[@markstone918]

Merry Christmas

[@apollozafer1639]

Merry Christmas Drae!!!

[@arup_en]

Love how he never looks at the weapon stats while designing the weapon

[@BenjaminMahurin]

Merry Christmas, Drae!

[@Anchor97]

You should save your money and mine your ore, you can go to the open mine through the gate opening the guards are standing at love your vids keep the great work 😘

[@JodiTheShinobi]

For the father guy you were supposed to just keep asking about the fathers until he gave up lol

[@Mr_bic18]

Pls play low budget repairs when it comes out

[@Wildemut]

That game looks fun as hell haha

[@NotTheAbhi]

that game looks excatly like something he plays.

[@deathbob2291]

So from the looks of it you are doing what is called burning the alloy this is where one or more of the of the components of the alloy are not supposed to get above certain temperature because this will weaken those parts of the alloy and the fact that you're heating it up to 2000 each times is probably what's dicken you

[@drecknathmagladery9118]

holy hell the cut damage on them maces and the pierce damage on that spear i cant wait for all the bugs to be worked out of this game and i do hope they also add a sandbox/builder mode because let's face it we all want to make something ridiculous that would be well and truly out of our price range during normal game play it would also help people like drae who really need some quality practice

[@ParkerAnderson-gg5xb]

Mary Christmas Drea love your vids 😻

[@CJ-all-around]

Love the video drae get going merry Christmas or happy holidays

[@karmskorner6430]

CUT RATE BONUS IS NOT CUT RATE. The parts you select when you make the blade, hover over them to see the stats they add to the blade. They will ADD CUT RATE and then you do the bend to give a BONUS to the cut rate from the build!

[@thstgyu1185]

DRAE GO TO THE MINE INSTEAD OF BUYING IT ALL 🙏 PLEASE 😂

[@itstonberrytime]

0:27 cut damage is the last number under cut rate. This blade's cut damage is 7.24 with the bonus. You need jagged blades for cut damage

[@peppapog8376]

Hey Drae, 2 reasons your alloy quality is low: 1 - Your furnace is too hot! You run at 2000*C but most your ores have a melting point around 1k-1.6k, so if you run at 2k it falls super fast. 2 - The ores you combine have different melting points, EG. Copper is lower than Kanka (iirc), so while you are waiting for the kanka to melt the copper degrades to 0, meaning when they combine youre starting at ~50% at best... Combine this with the first issue and you can see why youre hitting 0 quick!

[@Salty_Sailor]

You're overcooking your Ore. There is a specific temperature it needs to be at which is why your alloys degrade so quickly. Read your book to see the temp. If you burn your ore, it becomes junk. You kinda realized this earlier. Don't just go ham on the bellows.

[@paranormalpie6994]

Please Upvote this so Drae can see this. I just bought the game and played it for all of The past few days before christmas, I got to around the same area he's in this video. What i found i will simplify, Going Over the melting point of a specific metal Makes the Quality go down EXTREMELY fast, however As soon as you get to the melting point it almost immediately liquidates, making it pourable right after it gets to that point, staying on top of temp's really help for the Overall sell price and quality. Coal is basically free in this game, going to the Mine (The Path directly left of the Front exit of the shop) There is three rock clusters right outside, mining these will give you 200 coal each which you can put in the cart chest to take home, and they seem to respawn every day, best to grab them at night so noone can steal from you or be pissy about not being able to buy anything, On the topmost layer of the mine is Copper and savarda(?) ore, on the bottommost layer is Karda(?) and Gold Ore, seemingly thats all you can mine right now, your cart fills up at around 20 ores and 600 coal, which if you do everynight can rack up fast cash mitigation, The Spear Quest Is BS To be able to get to consistent cut Damage of 60 You need high quality ores, special perks and perfect smithing skills to even break 45. Its good he didn't accept it, Also the Lathe can only take 25cm of wood to carve, and spears can't be Curved they can only have straight handles. So You could only make a spear with raw wood (Minimum of 120 CM Handle), oh and don't forget to toss the bucket in the water trough to save the quality if you mess up the heat

[@wanlow5217]

I bought this game after seeing him play it, now I’m dying everytime he adds pre to a bucket with molten metal in it.

[@squish116]

I feel like a lot of the issues Drae faces with the game is that you aren't taught a lot of things through actively doing them- rather than you have to read. Everyone remember, Drae is dyslexic. He is also focusing on making the video entertaining. These things actively prevent youtubers, and specifically Drae with dyslexia, from learning video game mechanics through reading. He probably doesn't play the game on his downtime, and he might be super busy so he can only learn while actively playing and commentating. I get that its frustrating to see someone play a game incorrectly, but give the man a break lol.

[@spacenoob404]

You can aim the pouring by having your aim point in the middle of the screen lined up with what you wanna hit

[@eiboeck88]

money in this game i really easy 1. go to the mines 2. go to the lowest part of the mines an mine those ores 3. make the lora (i think that alloy is called) 4. make yourself a weapon that requires 3 ore 5. always qench at 530°C to get 99% 6. profit

[@Shadowknight_Gamingltm]

Don't forget about the mines drae it takes time but you can fill up all ores and materials. As soon as you walk out your store cut straight left and your there.

[@thegamemaster2000]

You wanted a realistic blacksmith game then proceed to not learn anything the game teaches you. Ace looking at hud gui, screw looking at hand mechanics, screw looking at stats that don't glow green or red, just YOLO the entire thing... this is my first time watching a series you made and honestly it's very frustrating... no one NEEDS prefect but be more competent than my 10 year old nephew.

[@voomvoom4522]

Hey Drae, Merry Christmas, and may Christ bless you and help you come to His light! Amen!

[@Shawnchapp]

FYI lathe does nothing for price.. buy the leathers that actually adss to the price, just buy the 5k one they are one time buy anyways

[@gnoddie]

the pierce rate at the beginning was at 7 you needed it to be at 20 for the guy to take it as he told you, you dont need the dummy to see the damage, its the pierce and cut rate thats important and you change that by choosing different materials for handle and blade and differnt parts for the weapon and longer or shorter handle and blade + quenching

[@codytanner4058]

To save material cost leave the shop and head left to nurenor pass, you can mine up coal and ores there

[@JokerTedd]

BONUS =/= TOTAL RATE!

[@thekingjdd]

Hey Drae, if I'm not mistaken you are over heating the metal and destroying it. The Survarna for example 19:23 breaks down when over 1100 C, this likely matters for smelting and forging temp when you reheat the blade. Merry Christmas everyone 🎄🎄🎄❄❄🎅🤶❄❄🎄🎄🎄

[@Azezel_Xeneus]

Merry christmas drae ❤

[@inspectorsteve2287]

18:25 is a stick with a butt plug on the end. Lol.

[@StraxAsh]

At the start of the video you have a cut rate of 6.25. Then it says + 1.35 if you take 22% of the 6.25 you'll get the 1.35. The cut damage you probably need is the cut rate but he bonus % is just added to the base for the shape.

[@achillesdiesgaming50]

alloys were junk because you put them in a hot bucket so the 2 khanka ores melted at separate times, there's a book that explains it

[@wanlow5217]

I don’t even think the lathed parts affect price or quality. Though all he has to do is remove parts from the mold, then he can do a second pour with the rest of the metal. I actually got 7 yuhidra dagger blades from 1 bucket of metal. Then I make the pommel and guard out of copper and the value is still really high as the bulk of the value comes out of the blade. Mixed melts destroy quality. You must put new or into an empty bucket. For the love of god, dunk empty bucket in water to reset temp so you can accurately monitor temperature. You can also stockpile components. Ingots, blades, pommels, guards, cut pieces of wood, and handles do not get thrown out over night.

[@legion499]

That "Hall-bert" looks a lot like a spear to me... 😅

[@AdamantErinyes]

It's so fascinating to watch you realize why swords were not the most common martial weapon. They used a lot more metal, and were a lot harder to make, than a mace or axe.

[@bl4rgh]

Good day to you Drae.

[@KenBrown-e8q]

This was a tough one to watch

[@achillesdiesgaming50]

be careful with the handles, useing the lathe will make them lighter, which will decrease piercing damage and increase cutting damage, and if you make the wood just long enough the be a spear and then cut it .01cm short it will count as a half spear

[@achillesdiesgaming50]

and making the handles fancy does nothing, just throw the wood on there unless your making a cutting weapon, then its better to make it as small as possible

[@blutregnet]

Drae, you need to look at the weapon stats on the left of the screen when designing your weapon to see the what bonuses you're getting. Almost everything, including your ore type, will have an effect on these stats. You can also look at the minimum production costs to get an idea of how much ore you need in order to make the design. Just need to do a little bit of math on ore prices.

[@PowerOfNull]

You can see the weapon’s best possible stats on the left, right above your ore, wood, fuller, and quench settings. You really need to read your comments more.

[@Treybey13]

Merry christmas drae

[@ironmendez5136]

gonna say this, when you have these guys with no special needs to weapons, you might want to give them the ones in your bedroom, the "junk" ones, just to save you the space :D

[@michielput3311]

Left top in the blueprint menu is your cut rate not the bonus % that you see on the right of your screen

[@LostImPark]

First things first you can go out town and mine almost all ores also at night time so you can save money the ore quality thing is also in the commenst to safe it throw it in the water and to get much money use Moraka ore or how its called (mined ore is cheaper) and make a full 2 hander out of it.... and dont forget you can requench the blades if you screw it (reheat it first to reset)

[@greenjackle]

Love the club sword. Drae always keeps things interesting. When you think he will screw something up a certain way he does something you never ever thought about. Now in Drea's defense this game seems to have a ton of glitches. But got to love him being so excited to use the wood working tool and forgets to. Typical Drae.

[@twilightwolfe7530]

A few hints Drae. Bet on the slave trying to free himself and make him a really good weapon 5000 copper will return 500000. you need 40000 copper by the end of the month (or you can pay your rent another non video friendly way. GO MINE GOLD you can go to the valley just left when you exit your shop. Head all the way down the pathway and look left, If there is no gold leave and go back it will reset the valley with new ores. Just make gold weapons a master craft gold one handed sword uses two gold ore and sells for over 10000 copper and its a very easy metal to forge with. There is a skill at the bottom of the blacksmithing line of skills that will show you a little icon on the left of your screen when ore is at melting point so you always get that high 90s for ore quality. DO NOT get the auto hammer skill it is border line useless.

[@StiveRibs]

This has been such a great advertising for the game I've actually bought the game thinking "This can't be that hard". It isn't. Drae, please, for the love of God, read the comments.

[@mikistenbeck6517]

a Mace is meant to be a skullcrusher weapon, just FYI. :)

[@dragonboss6454]

lathe doesnt effect the sell rate all stats of the item are at the left of the screen (including the sell price of a 50% item) in the design menu the cut rate they talk about is a combined effect of stuff like the ore, shape, wood, weight, and overall quality of the item

[@dawsonmod]

Hey peoples his videos are 1 to 2 weeek in advanced lmao so when u make a comment in less time he’s already done the episode before your comments 😂

[@FrostmanJack]

Merry Christmas everyone ❤🌍🌎🌏

[@dragonboss6454]

diffrent ores are for certain things hover over them in the design menu or buy the book

[@danielbinge2049]

Thanks

[@Altair1243WAR]

Sell value 385, Drae has it marked for 502. Yeah, no wonder you can't sell them quickly. You're charging 30% more than the estimated value of that item alone....