THE ONLY LAND ROVER ENGINE REBUILD YOU EVER NEED TO SEE. I'LL SHOW YOU WHY | MAHKER WEEKLY EP030

[@markbond4460]

Proper job built in Britain...you can feel the love in your videos for the best 4×4 . 👍👍👍🇬🇧

[@muktarjibril694]

Am a mechanic looking for job

[@typhoon3s943]

Q&A: Thoughts on highly tuned td5 engines? Great videos too. Thanks you

[@turnbull321]

Thanks for the Ultra Bulkheads suggestion, I'm currently planning my TD5 Defender rebuild

[@PHIL-BRO]

Father did an awesome job on that engines Dave👌🏻👍🏻 Q&A: I also have 2001 TD5 10p would like to know what basic engine mods and upgrade for road and motorway use.

[@Defendertek92]

Great to see some TDI love, do wish I could get u guys could do my 110 200tdi but my pockets are not that deep.

[@islandblacksmith]

lovely work!

[@wearemahker]

Thank you!

[@westozbandogs]

Beautiful work very impressive 💪👍🏼👍🏼

[@macmensah1093]

All time Impressive innovations

[@wearemahker]

Thanks

[@ascott6328]

The last of the English, keep on trucking👍

[@skattejag]

Love the work you guys do. So cool! Q&A 1) TD5 tuning, rebuilding and performance upgrades 2) do you ever consider axle swaps? (Say for instance 1 ton axles from US trucks?)

[@sf017s4]

I must admit, I really love the 200/300 Tdi rebuilds. They are spectacular David, well done to Dad for No. 2.

[@wearemahker]

Thanks!

[@captarmour]

I wish land rover continued developing the TDI instead of going to tall complicated overhead cam designs. a TDI 5 or 6 cylinder would have been awesome.

[@captarmour]

how much boost can the TDI 200/300 take? Any space for a Sequential Turbo system?

[@sf017s4]

@@captarmour I don't know the answer to that mate, or whether anyone has done it.

[@wearemahker]

Id say yes ! If built correctly I’ve seen these engines push 40-50 psi

[@harryreason9616]

Q&A: Can I come down to the shop and have a meeting with you guys about a 110 ls3 build in May? Enjoying every build great stuff.

[@wearemahker]

Of course you can sir please call Dave on 07712721138 to make an appointment please

[@kevinknight5325]

Another great video. ps. can you supply a series 2a 109 chassis?

[@smartiboo]

How come the chassis wasn't treated?

[@adamtehan1936]

Q&A Dave were you a VM in the Marines and if so when did you go through Bordon? I was a REME VM but got MD'ed 6 years ago

[@AdamRosenberg90]

Let’s see you guys do a td5 please, very popular here in Canada

[@DanPook]

Nice looking i run a series 2 standard with a 2.26 diesel i do like the Cummins 6BT nice for pulling

[@JuanPierreOosthuizen]

Q&A: I have 2001 td5 10p. What basic mods can one do to the motor, also, can one cam it? I currently making up a 3 inch exhaust system. Great vids btw, really do enjoy them.

[@davog1946]

If I’m not mistaken they all have cam shafts so you should be able to “cam it” 😂

[@JuanPierreOosthuizen]

@@davog1946 oooh funny guy😉

[@tommobot]

Q&A - on your 130 it looks like you have some low watt spotlights above the windscreen... Can you give some more details on these? Thanks

[@The58stupot]

Cracking work lads. And they said British Engineering was dead 🤣🤣

[@wearemahker]

We’re on a mission to change that sir

[@robertorr2999]

Q&A: Thank you for the great videos. Does the LS3 fit into a 64 Series II? Thanks again.

[@colinrichmond7080]

One for the Q&A: when would you choose an M57 over an LS3 and vice versa? Thanks!

[@mattcartwright8272]

Good question!

[@lyonoo]

Hi Dave A question for your Q&A vid. I would like to add some mods to a 130 on a some what limited budget what would you recommend I spend my money on first to get the best bang for my buck ? I’m talking in the hundreds not thousands that is until I win the lotto that is and then I will bring it to you guys to do a proper job on it. Keep up the good work cheers paul

[@adamcurrie7709]

Q&A: Hello from Northern Ireland 👋 I’m in the middle of refurbing my own 200tdi. The cylinder head is getting remanufactured by turner engineering & performance gas flowed, I have on the way from Allisport their full width intercooler & turbo technics VGT turbo, already have a 2.5” exhaust system from demand engineering. Would you alter anything else? Ie do you think the system would require more fuel from say a boost pin/ring combo? Recently had new injectors a few years ago. I’m not looking for a massive increase in power just smoother delivery, hope that makes sense. Love all the work you guys do, Adam 👍

[@wearemahker]

I can offer you my performance injectors and fuel pump if you’d like to ship them to me

[@adamcurrie7709]

@@wearemahker thanks for the reply, can I give you a call tomorrow to discuss this?

[@wearemahker]

@@adamcurrie7709 no problem sir

[@garnerharris2389]

Q&A.. What's the max horse power you could safely get from the M57 with few mods?

[@peterjohnson2245]

Question, fitting the roof back on, there are 2 seals (land rover parts) but also a sealant which is gunned in. What do you use for that. I've been on my rebuild a while and at that point.

[@paulzahra]

at 15.36 what rims are they ? dakar ? gr8 clean job !!

[@jonost24]

Can you keep the original reg considering the number of major parts changed? I want to change my D90 to a galv chassis, but engine & gearbox have already been changed.

[@wearemahker]

Yes you can. Get in touch if you’d like us to help you with a galvanised chasis

[@jonost24]

@@wearemahker thanks, your work is second to none, but I couldn't afford it. I have a D90, currently with a 3.5 V8 and 4 sp auto. I've junked the old lucas flapper and about 90% complete on megasquirt, although this has not been run yet. I'll continue to watch your channel with interest.

[@jonost24]

@@wearemahker Would you consider a galvanised bulkhead as an option?

[@Prinny9392]

Q&A have you ever converted an Audi 4.2 S5 engine into a defender 90 I was wondering if it could be done as Iv got an engine I’m thinking of putting in to my defender if it fits.

[@adamdavidson5885]

How much power can the standard 300tdi drive line take ? Before problems start

[@richardfoster8490]

Q&A: New engines, lots more power... do you put additional strength into chassis's?

[@wearemahker]

Just in time!

[@dennisnjeru2812]

i have a defender 110 but i need an engine the previous one got stolen ... i wantvto Start rebuilding

[@olliewall889]

Would you recommend stainless nuts and bolts everywhere? How do you get around dissimilar metal corrosion?

[@benjessup8643]

for anything chassis or drivetrain related no high tensile steel bolts for sure stainless has a lower shear strength and can snap easier

[@daniellee5272]

I dream of a Land Rover Defender 6x6 pop top camper with a spaceframe chassis for safety and a reliable engine with no electronics. However, I will never accept the bonnet "hump". For me, it's just not Land Rover.

[@milliondollarwhippet8515]

Banging 🎶 on this videos 📹 👌 😍

[@wearemahker]

Tunes! Good aren’t they

[@milliondollarwhippet8515]

@@wearemahker banging 😋 makes massive difference having a some different tunes to everyone else. How much for full service in my question for next video. Love to drive down for the day.

[@wearemahker]

@@milliondollarwhippet8515 what car sir ?

[@milliondollarwhippet8515]

@@wearemahker 62 plate 90. 2.2

[@wearemahker]

@@milliondollarwhippet8515 just engine oil and filters ?

[@enochpowellslibrarian5595]

Made in Britain 👍

[@nickdurnford7739]

Hi. Is that a solid rear cab window?

[@wearemahker]

It sure is we’ve a few in stock would you like one ?

[@ilavasound]

how much this project costs usually?

[@johnwainaina9865]

John from Nairobi Kenya. Where are you based in uk?

[@wearemahker]

Whitchurch in Shropshire

[@انسابوشوشه-ت8س]

❤

[@derJackistweg]

Better leave the video w/O music when talking, because we want to understand what you're saying.

[@wearemahker]

What are you watching on? PC/phone? We’ll do some testing to get the levels right - C

[@derJackistweg]

@@wearemahker Always PC, I am too old for these mickeymouse devices, aka Smartphone. ;-) I mean it is not bad - but imho it is interesting to hear, and it is easier to understand if nothing is distracting voice.

[@muktarjibril694]

Am a land Rover defender petrole machanic looking for job

[@richardsadler8226]

Q&A… Where did the name MAHKER originate from

[@miketaylor1916]

I got laughed at in 2002-2003 for tuning my 200tdi and doing similar mods to you…

[@stevewaterworth8231]

Q&A - What tips do you have for securing a Defender? We all love our trucks and want to keep them.

[@peterklein4349]

I was very satisfied with the 200TDI. Didn't find this video very informative Too much of music

[@captarmour]

pushrod engines are more compact lighter cheaper to build and easier to work on. the Chevy V8 proves that a pushrod engine can spin 8000+ rpm, why in heavens name diesels that rev to much less are being designed with overhead cams?

[@captarmour]

kzbin.info/www/bejne/an2onqKgns98jas This is a pushrod engine spun up to 9250 RPM. Watch the highspeed camera view of the valve springs!

[@stuartadair]

Let’s create a really great video and talk to people about our work, then make sure nobody can hear what we’re saying by playing music to distort the speech. Sack the editor

[@wearemahker]

Bit extreme don’t you think.

[@freeman6147]

Steroids?

[@wearemahker]

Nah just carries v8s around for fun