Weaving: Tips & Tricks for Hand Weaving on a Floor Loom. Fixing Errors & solutions to problems.

[@j.arcelia6927]

Thank you so much! Your series of videos is so helpful from the beginning to the end. I will be receiving my floor loom in three to six month. I will watch your how-to-videos again. God bless you.

[@Sue-ec6un]

This series is a must keep! I will definitely refer back to it often as I have just received my first floor loom. Coming from rigid heddle, it seemed like a daunting task, thanks for making it less intimidating and making it all make sense! :D

[@mickeyidaho6174]

It's 2019 & I just found your video series! Bless you, you've answered so many questions & today my husband presented me with my first Temple that he made for me!! We're working on plans to build me a real floor loom as well! I've been weaving for a year & have tapestry looms, one I bought and one my husband built for me that goes from Twenty inches wide to Thirty six inches. I want a floor loom but can't find any here in Idaho, so we will have to build one from scratch! Again, Thank you so much for this wonderful video series!

[@loganpollock1689]

I just finished a 36 inch wide, 10 epi, plain weave project using homespun, 2-ply yarn. I tried to keep the warp yarn as worsted because I figured this would go through the wire heddles better. The worsted yarn just wasn't working for the weft so I switched to two ply wooled spun yarn and it worked great. I had two cases of the yarn being crossed between the reed and the heddles and two cases of warp yarn breaking.

[@Sasha-go4ur]

Seeing all the little tips and tricks that you use is so helpful. I especially like the advice about using paper tape to track progress. Thank you for sharing!

[@fencepostfibers6612]

My husband Is Driving home with my new to me, loom. Thank you for all this valuable information.

[@judygove4844]

Thank you Dolores for this series of videos for the novice weaver! I was recently given a 4 harness loom and due to Covid 19, weaving classes in my area have been all been canceled. Your videos are giving me the info and confidence to forge ahead with my first project! Thank you!

[@adamakaru2683]

Thank you, i love your technical approach and problem solving great thanks.

[@alysonosters9765]

You have answered so many of my questions in this video! Thanks for the help, especially with showing how to add the extra heddle. I am in need of a few of those. Could you tell me where you purchased them and what gauge wire they might be?

[@DoloresJacobs]

Hi, Thank you. You can get "wire repair heddles" at the Woolery. Here is a link: woolery.com/wire-repair-heddles-9-5-10-5-12-5.html They sell them individually for $1. ea

[@alysonosters9765]

Thanks again..."repair heddle" just the vocabulary I was missing!

[@DoloresJacobs]

You're welcome. These save so much time in correcting threading errors. A great thing to have on hand.

[@kiwilassmanawatu6782]

best tutorial i have seen I have learnt many good tips thank you so much

[@DoloresJacobs]

Thank you for your comments, I appreciate it.

[@marlenemcavoy7480]

Awesome idea with the straw!

[@lindasamuelson4216]

You are my new hero! Where can I find the pins you showed for the home made temple?

[@DoloresJacobs]

The pins for the temple are what are called Chinese suspension hooks for silk painting. They are available at Dharma Trading Company. Here is the link: www.dharmatrading.com/tools/chinese-suspension-hooks.html

[@gprakasham]

That's a lots of tips, thanks for sharing with us. In fact the one you are weaving is beautiful color and pattern. Interested to know that as well. thanks.

[@ellenblack5376]

It looks like you get a really nice shed on your loom. great video, thank you, Ellen

[@DoloresJacobs]

Yes, the shed is good on this loom. Overall I am very happy with the HD loom.

[@ellenblack5376]

That is good to know. I'm limited on space. I was thinking of the 22 inch. I know I would have to piece a blanket together if I wanted to make one. Right now I just picked up a used table top loom to learn on.

[@rosepedal05]

Thank you very much just got a floor loom Nilus Leclere 36' 4 harness learning

[@NoBootyBeauty]

ooh, good luck! I just bought a weave frame 85x80cm, I'll unbox it tomorrow - happy learning together!

[@CarrieMtn]

Your videos are so helpful. Thank you.

[@patriziafusco2358]

hi Dolores, would you do a video on warping with other colours to show the method of changing colours on the warp board. i think it would be great to help understanding the method better. thank you

[@traciminer6750]

Thank you! I’ve learned so much watching your videos. I wish I would’ve found you before I purchased the 2 Learn to Weave books. And a couple of videos. I could’ve bought more yarn with the money. Where did you get your Temple? Right now I have a used Ashford 4 shaft Table Loom with the stand and treadles. Can’t wait to move when my husband retires and hopefully have a craft room and then I want to get a floor loom. Do you use the 8 shafts a lot? Thanks😊

[@sheralync5854]

I love the little cheat sheet with the round magnets. where did you get the round magnets?So many wonderful tips :-)

[@DoloresJacobs]

Hi, I got the magnets from Walmart several years ago in the office supply isle. I don't know if they still carry them. Amazon.com has something similar, check this link: amzn.to/2tPuR6A

[@sheralync5854]

thank you. I ordered my loom and should receive in 2-3 weeks. Looking forward to weaving on a floor loom

[@DoloresJacobs]

I am sure you are excited. I know I watched the tracking everyday. What brand did you get?

[@shellclytn08]

Great video. I'm learning lots. Where did you get the bobbin winder to mount to your loom?

[@DoloresJacobs]

Hi, it is a Leclerc Hand Bobbin winder. here is a link to the Woolery.com to see it woolery.com/search/searchresults?search_query=bobbin%20winder I think they all have a way to mount them on a table, I just mounted on the upright of the loom. Very convenient and out of the way.

[@rosepedal05]

Also can u just tie your peddles up so you have pattern that way or do you really have to thread the heddles by the graph thanks dear

[@kathleenhassenmiller5340]

If possible can you show me how to tie up my 4 harness loom for plain weave and rose path. I can’t remember how. It’s been almost 20 years ago.

[@dianerundstrom7451]

Do you have any videos on the correct way to tie up the treadles? I have trouble getting mine to pull up the harnesses evenly thus my sheds don't open with a clean space.

[@DoloresJacobs]

No other videos but, you may want to look at how the harnesses are hung at the top. Then just play around with tying the treadles to get them even and a large enough shed.

[@lisagoebel6637]

Ware do you get the hand bobbin winder.

[@margaretfreeman6793]

So helpful, thank you, M

[@RinEMV]

Great video!

[@DoloresJacobs]

Thank you, I appreciate your comment.

[@dianathefiberfan]

Amazing! Thank you.

[@DoloresJacobs]

Glad you liked it!

[@dianathefiberfan]

@@DoloresJacobs I just wish you lived around the corner from me!!

[@SpiritBear12]

If you bought a Harrisville loom, did you get it from their store in New Hampshire? Do you live in New England?

[@DoloresJacobs]

Hi, no I don't live in New England. The loom was shipped in two boxes and I assembled it.

[@SpiritBear12]

Wow, that must have been one heck of an undertaking! I'm pretty good at putting boxed kits together, but I don't think I'd want to tackle something like that loom. LOL Good for you though. :-)

[@dianerundstrom7451]

One more question please. where can I purchase those silk cloth holders?

[@DoloresJacobs]

Dharma Trading Company, they sell dye and silk.

[@user-dg1fe1vv3y]

Hi ur video is very helpfull.thanku so much.im new in this..can we follow 1234 numbers plz help.

[@rosepedal05]

Do you always thread heddles the same way no one talks about that ,you have 4 heddles 1234 so do u always from front to back 1234

[@DoloresJacobs]

No, you don't always thread 1234 although there is a lot of patterns that you can weave with this threading. The pattern or draft is what dictates how you thread the heddles.

[@rosepedal05]

Dolores so if my pattern says 122334143423. I just it continuing those numbers till threaded as many as needed is that right thank you vicky

[@DoloresJacobs]

Yes, just start at the beginning and thread until finished.