Wecreat Vision vs Glowforge vs xTool - Choose the Best Machine for your Craft Room

Comparing 3 enclosed diode lasers and helping you figure out which one is right for your projects. We'll look at the Glowforge Aura, xTool M1, and Wecreat Vision to help figure out which one is right for your craft room. This video is sponsored by Wecreat.
More details and current sales
Wecreat Vision shrsl.com/4cowd
More laser videos
How to choose a diode • How to Choose a Diode ...
Glowforge Aura vs xTool M1 • xTool M1 vs Glowforge ...
Reviews
WeCreat Vision • WeCreat Vision 20W All...
xTool M1 • xTool M1 Laser and Bla...
Glowforge Aura • Glowforge Aura Craft L...
Chapters
0:00 Introduction
1:00 Compare 3 lasers
1:10 What do they have in common
3:11 Glowforge Aura
4:44 xTool M1
6:08 WeCreat Vision
7:45 Which laser is right for your projects?
10:02 Final thoughts
_________________________________
Download your FREE ultimate guide to Cricut blades and tools tinyurl.com/5yu3z3sh
Follow Creative Ramblings for more Simple Inspiring Projects, crafts and DIY projects
www.creativeramblingsblog.com
_________________________________
Facebook / creativeramblings
Instagram / creativeramblings
TikTok / creativeramblings
Pinterest / creativeramblings
_________________________________
Shop my favorite craft products (affiliate) www.amazon.com/shop/creativer...
This video contains affiliate links
__________________________________
Want to collaborate with Creative Ramblings
Connect at [e-mail]
#creativeramblings #lasercutting #laserengraving

[@rrane5961]

Excellent review!

[@janedominguez1745]

Great comparison!

[@safiyaamos3023]

Thank you for this review! This was concise and EXACTLY what I have been searching for!

[@SarahVanderkooy]

I'm so glad this helped!

[@TeeUSA]

Thank you for this review. Does the Wecreat cut vinyl?

[@SarahVanderkooy]

Only laser safe vinyl. Otherwise stick with a blade cutter.

[@shellydason3310]

Great video. Thank you!

[@christinekranz4844]

Hi!! Thank you SOOOOOOO very much for this video - you were very thorough and concise. I have decided that the Aura isn't for me as I'm looking for 'more'. Between the X Took M1 and the WeCreat, which do YOU prefer? Thank you in advance!!

[@SarahVanderkooy]

Glad you liked the video. So the question is tough. I like the software of the xTool, it has more features. But the WeCreat has a stronger laser and it's much easier to raise it up. I do know WeCreat is improving their software and coming out with a big update this Spring. So that would really make me lean toward the Wecreat.

[@christinekranz4844]

Thank you very much! As of right now I'm leaning toward the WeCreat. The possible software updates are good to know. Those can always be updated which is nice. I was impressed with the WeCreat. I wasn't aware of it untill recently. Thanks for your help!!

[@irmarochin5271]

I agree this is a great comparison of the three. I too am leaning towards the WeCreat. Is the update coming in the spring and update to the software or the machine itself? If it’s the machine itself I may just wait until the spring to purchase one. Thank you in advance.

[@7RomanceTube7]

Is it better tonhook it the window or to buy the air filter

[@SarahVanderkooy]

I prefer the window, it ensures the fumes leave your space. Air filters are an added cost and require maintenance and some still need to be vented out the window.

[@patriciacolon1991]

Could I use it in the garage with door open at all times. Would this be considered okay as far as ventilation?

[@SarahVanderkooy]

Yes you can. I like funneling the smoke out a window so I don't have to smell it. If you are in an open area like that you'll be safe, but it will be a bit more smokey.

[@monicasosa4566]

Does the we create have an air purifier? I heard the air assist for it but that is different, correct?

[@SarahVanderkooy]

It should come with an air assist but that is for inside the machine. Outside you can hook up a purifier, theirs is called a fume extractor. It will filter the smoke coming from the machine.

[@deanlove7649]

We ordered one..got nothing but boxes of wood...no machine with rotary tool...anyway we could a phone number...we have looked but the number they list is out business..can you help!!???

[@SarahVanderkooy]

Depending on the company you ordered from I would reach out to customer service, typically with companies headquartered in another country it's best to use their email or contact form because of the time difference. I do not have a phone number for any of these companies outside of what is listed on their sites. Sometimes orders will come in multiple shipments so your machine may arrive separately. Wecreat support.wecreat.com/hc/en-us/requests/new xTool [e-mail] Glowforge [e-mail]

[@leighannschimmel1898]

I messaged you on Instagram. I have some pretty specific questions in regards to WeCreat the company? Thanks!