Regrouting A Bathroom Floor

[@MrCdrant]

3:58 that's the finished job? That looks terrible

[@troysymonds50]

Why would you use a carbide blade for cutting metal? They make an attachment for removing grout with a diamond edge. And you run it on high. Works much better. Also you need to vacuum it before grouting and vacuum as you cut the grout out so you don't fill the house with dust.

[@jamiewilliams5137]

You need to vacume the joints prior grouting . The new grout will not stick to The dust and debre from multi tool.

[@vasme973]

Good point👍🏻. I will do it this week.

[@gallahant]

The half circle attachment is faster and better than this cutting attachment you are using, for this particular job. Also, need to vacuum before re-grouting and use diagonal passes with the grout paste in order to get it in properly.

[@richardmccann9293]

also, going over it with the grout float at least 3 times makes sure the grout is completely compressed and all the tiny little air bubbles within and under the new grout are removed. Makes for much stronger and longer lasting grout! :)

[@CzMnHD]

Angle grinder with diamond blade is 100x faster than multitool with custom high adjustment on small roller tires+ vacuum. I have done 5 big sized bathroom floor and walls full regrout. Trust me I know what to use on the cheap. Use metal drillbit on the corners. I can out perform anyone trying to do this on the cheap LOL.

[@cheesetownboatrepairmainte2101]

Many people probably aren’t gonna have an angle grinder, and it’s probably gonna be less useful to someone just doing home diy projects. A multi tool also is much easier to keep in the channels.

[@chrisdownunder8745]

How many people will cut through the water proofing with the multi tool?

[@jasonk1746]

Do you need to use a sealer on top of the grout? I have to redo almost my entire powder room. The individual who did it prior used a sealer after the grout dried. Perhaps it was a different type of grout..

[@David-Field.Stuff01]

Grout sealer is required for tiled areas in the shower itself because amazingly grout isnt waterproof. Isnt that bizarre?

[@jasonk1746]

@@David-Field.Stuff01 ok thanks. What about sealer on tiled floor of bathroom itself? They are porcelain tiles and in a powder bathroom that would get water on it from possible spilling from sink, but nothing like a shower. Probably better to be safe and do it anyways right...?

[@trje246]

wait, so new grout takes 20min to set? i wouldn't trust myself, i'd have to get the old grout out even before mixing the new stuff up. good video though, giving me the courage to get up and do it.

[@twincherry4958]

Or get pre mix...lol

[@1Melody1963]

Exactly

[@troybush5899]

@ 3:58 is that BEFORE or AFTER? ...... If AFTER, I DISAGREE with, "...the area that we patched looks pretty flawless and I'm really happy with how the color came out" ...looks like you need to try again.

[@tashtheminion4515]

This video was incredibly useful. Yes i am lucky enough to have a multi tool but never thought to use it for removing the old grout. I had to buy a float which was only a couple of pounds and the grout of course. I vacuumed out the joints once finished before doing the grout. I am a lady of mature years who has never done this before. I literally did my repairs in an hour and am very proud of my accomplishment. It took another hour to clean up the excess grout though, I would caution leaving it for 20 minutes!!!

[@OTRAL24]

Exactly...good girl..I replied to this vidio. U don't sweep debri into the lines... nor add painters tape to put don't so you can only fix that whats needs y To be fixed. Unless ur an absolute moron🤣🤣

[@justice4all997]

Question: the tile that's been in the house for the last 50 the grout doesn't crack or chip off ever.. HOWEVER someone install some tile in my house last year and it's cracking already. The floor got wet and it really cracking down. Why is 50 years old grout not cracking at all and 1 year old grout cracking fast?

[@golffish4291]

Less than $20 in supplies lol. Yeah bc every home owner has a multi tool w/ carbide bit and tile float lying around.

[@earyar57]

Exactly.. how bout I just pay my tile guy $100 every 20 years so I don't have to worry about buying tools im never gonna use ever again. 😉

[@naegleriafowleri2230]

@@earyar57 100 to retile? Lol on what planet

[@earyar57]

@@naegleriafowleri2230 the subject matter here is in reference to re-grouting. Not complete re-tile. So planet earth, I guess?

[@littlehat5188]

@@earyar57 if someone is regrouting for a $100 they probably don't know what they're doing.

[@earyar57]

@@littlehat5188 oh ok.

[@KL-Seattle]

Thanks for the video this is helpful. Does the new grout need to be sealed?

[@wazup3333]

Yes, unless it's a special type of grout like epoxy grout

[@quirozfamilytv7962]

That grout application with the fingers is a new technique I wasn’t aware of 🤔🧐

[@MyBuzz65]

What if it is a project to change grout color, not so much damage, from dark to light?

[@myosunkim7805]

Nice job!! I want to know the name of the grout you used. I installed some grout three months ago, which already came off.

[@208dany1]

Can you do it with a 1,000 square. And no complaints with the customer?

[@SuperJaguar7777]

And you mixed the grout when you finish to take everything out

[@shane250]

"Less than $20 in supply"... Crying in 2023, where now only the sponge is $20.

[@ashokagarwal8622]

Need these tools from where we can get

[@AG-mt3xs]

What is the brand of that tool and attachment?

[@DiannaAtherton]

Ridgid is the one I am using. Home Depot. The head has I interchangable heads. Sander, jigsaw etc and one oscillating head is what he is using. Reasonable cost and cordless.

[@AG-mt3xs]

@@DiannaAtherton I ended up getting the Craftsman one. It works really well, but I stayed with the hand tool because I was concerned about scratching the tile. Found a head made for regrouting, which helped...but the hand tools worked better and was easier to control. Thanks for the instructions, though!

[@giuseppenero110]

Good thing I watched this video. Wouldn't have guessed I shouldn't damage the tiles.

[@mattm5505]

yeah if you have to redo a whole kitchen not just 4 little spots in a bathroom it’ll be quite a bit longer than an hour also that bit is about 30$

[@armitron77]

Comment section did not disappoint unlike his grout work

[@koreypettit67]

Does the process change when the grout is lining like a bath tub? Or do you have tips on that

[@soonicevery]

How can I clean my grout? I have white grout and grey tile. I have tried the expensive Aqua Mix brand heavy duty grout cleaner and it didnt work. I also tried baking soda and Four Moms cleaning vinegar, which seemed to work better. Any advice is appreciated very much

[@zorrog.2947]

Thanks very much...Very useful...I have a small bathroom floor grout repair job to do and now know what to do. Cheers!

[@akhere4279]

Did you repair grouting of entire bathroom floor or just those two tiles in that one hour?

[@mattm5505]

just a couple little spots i’m doing a whole kitchen and it’s taking forever

[@pankajkaushal7804]

Wht is the size of spacer

[@gasousman]

Should I use white grout in a bathroom? I think the staining will be a problem?

[@lewismclean6285]

Don't mix grout until you're ready to use it. This video is ridiculously poor.

[@Billy_Bull_Sheeter]

Won't this chip the edge of the tile

[@MichaelMarcusLVTANDG]

Can be done...Need a good steady hand...What if the blade hits the tile (corners and edges)...Small areas like under 100 square feet controllable...

[@BAM85]

Where can i buy a multi tool for 20 bucks yo?

[@denisbarrette192]

YOU FORGOT TO VACUUM OUT THE DUST

[@rklaforest]

Do you seal the grout after it dries?

[@jakeyboy5782]

No

[@carollanderos913]

How do I regrout bathroom floor if I only have 1 bathroom to use. Can’t do without for 2 days?

[@LivinRob]

Grout will be dry in a few hours. Fully cured in 24-48 hours. These guys are not experts.

[@austinperdana1621]

Is this the solution if there is the water seepage from the bathroom?. Regrouting?

[@rodneybradbury2880]

your are using the wrong blade and after you removed that grout you need to vacuum that area to get all the dust out then use a sponge with water to clean all surface dust in the joins to make good grout contact.

[@aubriem3099]

where do you get the multi-tool you used to remove the grout?

[@jackwwp]

Every hardware store ha them .i got a cheap knockoff from harbor freight.less then 30 bucks did the job

[@jackwwp]

Also there's way better videos on this topic.i was gonna remove all old grouting come to find out really don't need too,unless it's so loose it's falling out .

[@walterbarone8350]

from home depot ??!!

[@vara62]

dremel oscillating tool www.homedepot.com/p/Dremel-Factory-Reconditioned-Multi-Max-Corded-Oscillating-Tool-Kit-MM45-DR-RT/204996227

[@zaidzaid7732]

Aubrie M Hello

[@AustinPetDetective]

You dont show how to get the excess dirt and grout before applying the new grout ?

[@slave0418]

I just brushed on pool chlorine on dirty grout. Next day grout looks like a new one. No need to remove...

[@callumgurr9140]

Unless the grout is damaged obviously

[@Ethiokarate1]

Really appreciate this video, never imagined using the tool we at work call the "Jigglo" to work this way

[@elitem3]

Why not usr a vacum to get the old grout out after it was sanded lol

[@ramareddyayyanagari4878]

Fjf

[@pauljs75]

Make sure it's a shop vac though. That kind of stuff may mess up a regular house vac used for carpeting.

[@Chanmantroop10]

Should've replaced all the grout in that bathroom since it's not that big to begin with and guarantee color match. The existing grout will probably fail sooner or later anyway since it was probably improperly packed and the grout wasn't mixed properly

[@stndrds79]

It’s a nice consistency dammit and what is that consistentency !

[@brandon7671]

a) Wrong carbide blade for the job. b) Blade is in line with the tool which makes it more difficult to control in this situation. Should have turned the blade 90 or so degrees to the tool body.

[@BillDavisVBKI]

i prefer an angle grinder and a steady hand. I could have done this in minutes.

[@davidmurphy8480]

Brandon . Yet another KZbin expert !

[@BidyaSJoshi]

Brandon lt would be more convenient to have small circular blade in an elongated arm.

[@Moriningland]

Only a total douche says that’s the wrong tool without suggesting what the right one is.

[@grahamd5418]

Brandon. You seem to know what you are talking about and quick to give out advice. Which is fine . However, I have a question for you. If you are so good as you claim to be. Then why are you wasting your time watching demo videos? I would have thought with all your perfect skills and knowledge. You would be too busy and have no need to even entertain such a basic exercise.

[@heenaqadir5338]

What tool is he using? What's it called? Any link to purchase would help

[@danhusband6154]

Wouldn’t you address the cause of the cracked grout (loose tile) before replacing the grout?

[@eddyvideostar]

Dear Dan: Wear and tear would be the cause.

[@Chanmantroop10]

Likely the initial install didn't pack the grout and or didn't mix the grout properly so it cracked very easily. Seem this. Many times

[@chulaloca7613]

Fixing the floor I am happy I Love Your video

[@1Melody1963]

They seem like nice guys. Unfortunately too much of the focus was on them and not on the job at hand. To me, not a professional, it would have been more helpful for them to tell the name of the multi tool, but they just skimmed right over details like that. Or specifically what grout is used and what different types are best suited for, etc.

[@nononononoo689]

It’s called a multitool. Google it.

[@carollanderos913]

Login Rob - are you saying can use earlier than 24 to 48 hours.

[@raoofabead8039]

اريد الشراء

[@chrissylarson6232]

A multi tool is >$20; its not a supply but makes a big difference

[@dogcomb47]

Must you get every bit of the old grout out before regrouting? Mine is about 1/2 inch wide.

[@dareaper3791]

JesusWaytoHeaven17 just grove it n make sure the edges are clear

[@lalausmani6107]

My tile is already out how do I reinstall it?

[@klenmcrock5265]

They removed all the grout while waiting for the new grout to set up after mixing it. I wish I could get demo done that quickly! I'm calling bullshit ok n that btw.

[@chellepatino1675]

They're only fixing one little area not the whole bathroom.

[@CarolineAnandSiddiqui]

Why not use hydrochloric acid to remove the grout?

[@nareshnaidu4872]

I need an idea for water leaking through wall inside house in an 4 floors apartment of first floor can any one give idea

[@krazykozey2259]

Need more info. Tiled shower or fiberglass? Standup shower or bath tub?

[@naveenpadigela6783]

Naresh naidu polymer based water proof material is available

[@naveenpadigela6783]

I have an idea call me iam an applicater my no is 9014130134

[@LivinRob]

move

[@bhaskararaokinjarapu8130]

I have good idea cl me 8500891996

[@Barefootseal_66]

Tried the blade on my multi tool and now it looks like a super toddler has been chewing on my tiles. Send help 😅

[@guzman9011]

An hour of work for a 12" line lol

[@MrOscar5690]

Less than $20 not including $200 grout removal tool 🤦‍♂️

[@Dggb2345]

$18 multi tool. HF.

[@sil-80nick]

If you don’t already have a multi-tool, you’re probably not a guy who should be doing grout work to begin with.

[@erv27ggg]

You can easy damage tile with this tool if joints are small.

[@kib2675]

doing this by a hand tool is better and just as easy. If your store does not have one, you can use this one without the batteries.

[@dougdafoe5743]

Who mixes grout before the old is removed NOT

[@Ethiokarate1]

lol they are just doing a small patch broskii, its not the full room right

[@kingboopathi]

Doug Dafoe டைல்

[@randomrealestateinvestor1694]

They can just add water if it’s dry but I agree to wait a sec

[@David-Field.Stuff01]

Always hoover up the dust in the grout space before putting the new grout in.

[@bjornironsides6474]

I'd rather dirt devil it.

[@azamawang3504]

not all grout is the same size..is that tools supply few size

[@Waterproofing02]

I want to this cutter machine please brand no of machine

[@fakku6356]

i can see that using that little tool its jumping all over the place not removing the old grout likes one would like and you can see it can break or damaged the tiles not to mention the time oh my gosh the time it would take to remove the old grout

[@johnmiller9219]

ok so you mixed 5 pounds of grout and used 3 oz of it

[@jeanmanns4467]

Yep, they make everything look so easy.

[@projectfreedom9510]

It is actually, easy. I just did this to mine, that oscillating tool is a must though for ease of the labor and saves time. I don't know much about titling either. Just knew that the title grout was looking dirty and so I did this.

[@taylormills106]

These guys are hacks who the hell wears gloves when they grout and why would you need an electric tool to take it out when you could use a 5 in 1.

[@מושיקוזוהר]

Taylor Mills סרט כחול

[@jennifercarbajal7356]

Whats a 5 in 1

[@jamesmcconnon2]

Jennifer Carbajal it’s it generally known as a painters tool

[@tonboy8518]

Ok tom lets put the grout in Oh damn the grouts set in the bucket

[@dougnarup3608]

Well done guys.

[@giselanumfor8669]

Am looking for this job is live in do

[@gouravkumar772]

Neat work✨

[@wheres_bears1378]

This guy is using the worst possible multi tool blade possible

[@elwelldavid9832]

Anyone with grout starting to deteriorate needs to watch this video . . . NOW!!! Thanks for sharing.

[@jockey123able]

That’s the stupidest thing I’ve ever seen!!!

[@concernedforfreedom9304]

1/2 a pail of grout for 12" of tile....

[@nld-bl5ct]

There is a tool which is a lot better, or an attachment to the vibrating tool. You will not damage the tile with the circular tool.

[@dijostero]

What is the tool and where can I get it? I need to do the whole floor.

[@spirittiledesigns9916]

Good job.

[@sherlockbonez]

I would use the half disk instead of the blade

[@truongdoanluyen8113]

Giá bao nhiêu vậy shop bán tại Việt nam

[@frankchastain8998]

Tip males probably shouldn't know..you don't stir pancake mix smooth.lol.great video.thanks helped me on my project

[@jonnylaris]

Just put new grout over the top and job done!

[@moses0032]

I saw pin holes now perfect

[@Lyrics_And_Harmony]

All of this is wrong so far and I have never done this myself. Your supposed to use a 45 degree angle when removing excess grout

[@Natasha-sx9wx]

An hour of work and he fixed one tile

[@tilesbaluchennai9225]

where sale mechine?

[@lindamonette2605]

After watching this I’ll hire someone 😳

[@michaellewis4363]

Star Lord in the intro?

[@fridmanns]

Wrong blade for the job..

[@open9605]

For easy u can use the grinder withvlow speed

[@jumbroni6014]

Most bathroom groutlines are tiny

[@westcoast6645]

You forgot to vacuum between the tiles before grout

[@bl3727]

this is screw up because it will damage the below water proof layer

[@chulaloca7613]

Extender floor the floor

[@randomrealestateinvestor1694]

Try regrouting a whole house Lol definition of hell

[@ObraMaestroChannel]

Love this

[@sixstringerati]

This is NOT the right tool to use ! . I almost made the same mistake. The vibration from that tool will break the bond that keeps the glue intact. Use a circular wheel. Who makes these videos anyway ?

[@chloechan6813]

A few years ago, we sold our smaller house and bought a much bigger one. The weird thing is, the old house had much better storage and closet space. As a result, I'm always looking for organization ideas and these are some great ones!

[@trje246]

That's nice and all but your comment, and this video have pretty much _nothing_ in common.

[@SuperJaguar7777]

Wrong blade for Grout you need the demon blade