Weihrauch HW30s. How to improve your rifle. Part 1 of 3: Stripping your rifle

  Рет қаралды 1,469

TbT Tinbum Tuning

TbT Tinbum Tuning

Күн бұрын

Пікірлер: 10
@kims2r
@kims2r 29 күн бұрын
We don’t deserve you Nick! Thanks so much for everything you’ve done for the airrifle community🙏🏼
@halmason9252
@halmason9252 Ай бұрын
Hi Nick, very nice way to present this airgun information. These three part series allow plenty of time to present the needed information. Please keep these going for the HW and hopefully the Air Arms TX and Pro Sport airguns. Maybe when these are complete you could put together some detailed sort of generic service information for spring powered airguns. Not detailed disassembly and reassembly but generic information that could be applied to even the least expensive airguns. Thanks again for these three part presentations.
@ianbath4776
@ianbath4776 Ай бұрын
Look forward too the next one 👍🏻
@springpistonriflefeverlone9611
@springpistonriflefeverlone9611 Ай бұрын
Liked!😃👍 One tip for the HW30s, before removing the last screw 🪛 on the compression chamber, put the trigger pins back in the compression tube, then remove your last screw, then apply pressure, pop the pins, then remove the spring.🪛🤠👍
@paulspeller968
@paulspeller968 Ай бұрын
cracking little rifle 👍
@dafarsher9738
@dafarsher9738 Ай бұрын
Really interested to see how you design your kit and what sort of power levels you settle on in this series. Must say I would be interested in a light weight gun generating 8.5fpe - 9fpe which has a nice shot cycle and the cocking effort isn’t too heavy.
@WaschyNumber1
@WaschyNumber1 Ай бұрын
I hope a video about a more powerful version of a similar HW comes in the future,gor one that's maybe still produced new or is not difficult to get with tips and tricks also for it. 🤔 🤗
@DanielJones-q4r
@DanielJones-q4r Ай бұрын
Another fantastic video Nick 👍 And enjoyable to watch.
@stephenhancock86
@stephenhancock86 Ай бұрын
Tip for you Nick,put your punch through the top trigger pin hole,it holds the back unit so there's no pressure on the little screw
@WaschyNumber1
@WaschyNumber1 Ай бұрын
Nice video, I'm wondering the hole time if you sell also screwdrivers like you use in the video. 🤔 Becourse normal screwdrivers are different to gunsmithsing screwdrivers normally, that thay sit propper in the screw head and don't slip out and scratch everything or even wors going somewhere against the body and the next station is the Doctor in the hospital.
How many people are in the changing room? #devil #lilith #funny #shorts
00:39
كم بصير عمركم عام ٢٠٢٥😍 #shorts #hasanandnour
00:27
hasan and nour shorts
Рет қаралды 12 МЛН
How Much Tape To Stop A Lamborghini?
00:15
MrBeast
Рет қаралды 262 МЛН
Which should I buy: Weihrauch HW50s(HW99s) or an HW35? Unbelievable result!!
13:02
How to refurbish your Lee-Enfield SMLE rifle
13:42
JollyGreenSlugg
Рет қаралды 6 М.
You Need To Own This Refined Rifle - Daystate Huntsman Revere - Range and Country
22:14
The TbT guide to choosing and mounting your scope, the right way!
15:06
TbT Tinbum Tuning
Рет қаралды 1,8 М.
Weihrauch HW30S Vortek PG2 tuning kit
6:32
Tomaz Holmström
Рет қаралды 128 М.
What is a TbT kit, and how does it work?
8:38
TbT Tinbum Tuning
Рет қаралды 21 М.
Webley Falcon Classic review-Big Dan's Airguns.
18:25
Big Dan's Airguns
Рет қаралды 4,7 М.
How many people are in the changing room? #devil #lilith #funny #shorts
00:39