Welding a Dump Truck Bracket

#welding #repair #treeservice The dump bed brackets ripped clean In half! They had another welder come along before me, but I guess his welds didn’t hold up. So it was my turn to tackle the job. I had the new brackets pre fabricated so I could do the install quickly.
Here’s my Instagram- www.instagram....
Here’s some links to tools I use
3m Quick Latch Respirator- amzn.to/3LhFc5A
Chipping Hammer-amzn.to/402Oqq6
Gloves- amzn.to/423tMYV

[@jgeeee1029]

"They left the wire for extra support" had me dying LMAO

[@arustydodge2111]

Great repair ANTHONY! Nice job!⭐️⭐️⭐️⭐️⭐️ Really like that you’re humble enough to show us the mistakes that all of us make. You correct them and carry on. WELL DONE, BROTHER👍😇👍.

[@MeltinMetalAnthony]

I try to keep it real!

[@arustydodge2111]

@@MeltinMetalAnthony You do Brother! 👍⭐️👍

[@softiss]

this stuff is real stuff. small jobs. cool little videos

[@1nvisible1]

*You have some A-level Oxy scarfing skills. I'm always surprised when you scoop someone's weld bead out half inch plates and just knock them apart with one hand.*

[@milo6373]

To be honest two tacks helped line it up perfectly on the pivot , nice 👍 work 🔥🎯💎☯️🤔🥱

[@loganrench5680]

Bet that guys eyes felt great after staring at your arc 😂😂

[@johnw.peterson4311]

Anthony, man I’m proud of you. Great work ethic, and honest about the good, the bad ,and the ugly situations you encounter. I am a former journeyman welder/ fabricator and it is a pleasure watching you. Keep at it my friend!

[@waiakalulu7544]

It's cool to see the mistake and then the correction. I easily get things inverted or mirrored the wrong way when I'm in the thick of things. The wisdom you shared was testing things first with tacks then changing course once you saw the mistake. I always find my mistake after I've fully welded everything. It sux, too, because I usually get burned and break a few other things in the process of "fixing" another thing. You make it look easy getting things done, but going backwards on a project like this is a trap I fall into all too often. Thanks for dropping scholarship on us on how to keep moving forward.

[@joeyfisher2625]

Appreciate the level of safety, propping the bed up. Lead by example. Good work!!

[@MeltinMetalAnthony]

Thanks for watching!

[@mikepflueger8597]

Dude, I've been following your shit for a while now. Got my structural contractors license here in California, on your advice. But I still watch your videos with a beer in hand. Its like we been working together fir years. Keep it up!

[@BruceLyeg]

Nice job man. Those torch cut circles were pretty clean and your welds look excellent

[@JonDingle]

Great job young man. Anyone that does welding repair work or fabrication that doesn't screw up or claims they never screw up is a liar. Well done Anthony for not just admitting you screwed up but that you still made a mint job when you corrected the error. I have several dozen screw up "T shirts". I doff my cap here in cold wet England in respect to you! Best regards, Jon. P.S. If a channel called Sackville Welding Services comments on your channel, that is me!

[@MeltinMetalAnthony]

Thanks Jon! Always look forward to your comments! Hope life’s treating you well

[@JonDingle]

@@MeltinMetalAnthony Thanks young man. Life could be better but on a positive note l have a heavy plant customer on board that gives me regular work. Take care and best regards to you!

[@tiredcreekironworks8123]

Good looking welding, and nice torch work! Thanks for sharing

[@spudatbattleaxe]

I install those dump beds where i work right now and yeah the original install on that looks pretty rough😂 nice repair job!

[@gerardhorn9892]

extra wire for extra support 🤣🤣🤣

[@mresnick797]

Get a circle burner for your torches. Makes cutting circles a lot easier

[@armedmariner]

@mresnick797 can you explain how cutting circles work with a torch? Or link a picture? Love to see that.

[@amos4457]

You do good work Anthony. You need to add a carbon arc to your arsenal.

[@Cholton327]

They left the wire for support. Lol. Haha. Good job mate

[@Gabriel33391]

Respect to you man, I’ve recently started my mobile welding business in California and watching your videos really motivates and inspires. Keep burning rods and content coming

[@MeltinMetalAnthony]

That's awesome

[@stepho9999]

Looks like one of your bodge job welds 🙃🙃😉 welded upside down 🤣🤣you couldn't make it up ,best comedy sketch ever .

[@MeltinMetalAnthony]

Dam edited the comment and still spelt botched wrong, your one stupid MF 🤣🤣🤣😂😂😂

[@stepho9999]

@@MeltinMetalAnthony I think you will find that Bodge is a word if you google it under (meaning )😂😂 Its obvious that you have very low vocabulary when it comes to the English language hence your foul mouth , typical American education .P.S YOU have a ridiculous hair cut reminds me of a Muppet character ,what was his name (Beaker )🙃

[@billrandles8550]

Anthony, how do you spell damn,talk about the skillet calling the pot a blackass!

[@milo6373]

Working Man here , definitely a tight squeeze no pun intended MMA 💪☝️💎✌️🎯

[@wideopenbros3196]

Your channel is extremely awesome I just started my welding certification last week

[@juniorwhelchel6337]

Welds looked great and also I see today even the best FUCK UP accasionally 😆😂

[@billbray5995]

Yoo Hoo, another another Meltin vid

[@arturocruz1993]

I’m repairing a trailer suspension with welds like that. I hate it when stuff like that happens but it’s nothing but a step for a stepper. 👍🏽 good work.

[@MeltinMetalAnthony]

Dam on suspension 👽

[@armedmariner]

Nice welds. Those old welds look like a complete newb or a drunk worked on it before. Good craftsmanship. I’m glad you accidentally inverted that bracket - just to show that it really is The Real World sometimes when crap like that happens. You just groan and move on. Maybe 45 years ago??? me and my brother in law and his buddy welded same basic problem on buddy’s dump truck. The fuel tank was Danger Close at one point and everyone was like “nah no problem just keep burning rod”. I shut that shit down and went and got an old wool army blanket and soaked it in water and draped it over the fuel tank. All is well that ends well. I was seeing visions of fuel explosions in my head. Truck was a 1 ton landscape dump with a gas motor! Once again. Thanks for a good video. I like watching your work. You make good clear videos. You must spend a lot of time thinking before you film cuz you seem to always get efficient angles and views that don’t require a ton of talking. You are a good kid!

[@markb3129]

Is that some bubble gum welding on the original repair 🤣. Keep up the great videos!✌🏻

[@MeltinMetalAnthony]

Yes it was

[@carlbrooks68]

You owned it, You fixed it. As always making Hay while the Sun Shines. Thank you for Sharing This Adventure.

[@85square]

I love how that dude is just watching you weld lol

[@MeltinMetalAnthony]

I noticed when I was editing

[@sackvilleweldingservices]

Well done again young man, great work and honesty! Best regards, Jon.

[@MeltinMetalAnthony]

Thanks man!

[@nicholasborden7503]

These videos are awesome especially the end 👌

[@4shooters]

Story of my life lol. Nice job, you got a subscribed.

[@NLH350Powered]

"Left the wire for extra support" 🤣

[@steveanderson4768]

I like your attitude this is the first time I’ve seen your videos very good stick welder you really are I love those bubblegum welds that you started with and like you said if you can’t weld weld a lot

[@randynewtonsr9659]

Awesome content as usual Anthony , and I love the endings to your videos “ if you liked what you saw here today, like , subscribe, share , if you didn’t , go fuck yourself , I really don’t give 2 shits “ 👋🏻👋🏻😂😂 hey if You ever do start selling merch , that could be a good saying to put on a tee shirt lol 🤔😉

[@MeltinMetalAnthony]

Lol working on it!

[@chasewebber4316]

Love this guys attitude

[@dakotadavis5462]

I'm just glad to see some1 who can still wash welds with a torch and a cutting tip old school and simple always works

[@lucmarchand617]

I like too know weld this first before right.good safety device install.good work.thanks video

[@thebeardedstork432]

Another nice one, Anthony! Well done and thanks for sharing!

[@MeltinMetalAnthony]

Glad you enjoyed it!

[@thebeardedstork432]

@@MeltinMetalAnthony Well I ain't a fan of going and F#@*ing myself.....so i didn't have much choice! LOL

[@user-ru7jh5df9z]

Good, clean penetrating welds- what a beautiful thing.

[@MarioMartinez-os5ch]

Love your videos forever

[@robertwagner8440]

You have to respect his honesty, 'If you don't like it ,go f#@# yourself'! Puts all those critics and haters in their place!

[@129jamie]

Your welds are getting neat man!

[@justintasht1067]

Great video great work great repair. All ways enjoy watching your videos and learning or getting some tips big thanks👍👍

[@MeltinMetalAnthony]

Good shit man! Glad you like it!

[@russellmclaughlin8526]

I'd be using a cheap hard rock disc to clean up those torch cuts instead of killing flap discs. Just some food for thought.

[@jimbob4456]

I would try to take before photos with your phone that you can reference after you take things apart. I do that all the time and it comes in handy.

[@MeltinMetalAnthony]

That’s how I figured it out 🤣

[@jimbob4456]

Nice looking welds.

[@MeltinMetalAnthony]

Thanks 👍

[@Liddellwelding]

Nice fookin job, you make great videos of a guy hustlin. If your ever in utah could use your skills

[@adamb4093]

Great repair makeing some cash

[@christiangranados580]

great work man, you took care of those bad welds like nothing. not many people do the job right in any type of dump truck. one question of you see this, how do you land jobs like those and how often do you say no to them?

[@MeltinMetalAnthony]

Walk in and ask lol. That’s how I originally made Thai customer. I’ve worked for them many times

[@derekbryant6137]

Fun tip if you have a long enough combination square and you're transferring from the old plate to the new played the hole you can lay across lined up with the top diameter of the hole the top of the hole just run A-line across to the new plate from the old plate same with the bottom this also makes it easier to put the center you can also do it with a small square 8 by 12 square I suppose you could do it with a bigger speed square also if the straightedge is long enough to reach across to the old plate

[@MeltinMetalAnthony]

Great tip thanks!

[@Boblever687]

Triple barrel torch is the way to go

[@StrangeTimesNear]

You're work is outstanding

[@torockiusz8836]

If I would make a weld like that I would commit seppuku immediately What that guy did its a warcrime

[@1forthefacts254]

Some good cuts

[@retirementhobbyfarmdiyadve1511]

I love your videos and am impressed with your ability to cut with a torch. I’m sure oxyacetylene is easier in the field rather than adding a big compressor to your truck. Do you ever use a plasma cutter?

[@deant876]

I know it's not your responsibility to make sure that rod rotates freely or has no slop, but that is the prefect time to check it out. Like you were hitting that bracket to turn it. It should move freely, have the customer grease the hell out of it while it's down and you can turn the rod to get the grease all of the way around it.

[@jackmioff000]

I save random washers and used up cutoff wheels as stencils when I need to cut out a circle

[@MeltinMetalAnthony]

Great suggestion

[@rustypotatos]

Looks like I welded that shit hahahaaha who the fuck allowed that. Good save brother

[@bossygold5330]

Fuckin killer outro

[@peetky8645]

making the bracket shorter increases the stress on a smaller portion of the bed frame.....might lead to bending or crush failure.

[@Ilikeanail]

this one here strong with bunnal tech

[@francodeiuliis1562]

Another great final result Thanks for sharing Cheers from Nova Scotia

[@johnnydelio7078]

look at them corssmembers... Blown TF out

[@daywalker6847]

Nice video... Fok clean gloves 😂😂

[@IJChan223]

good repair, but that outro is something else.

[@Jcreek201]

Not that I have anything against the torch/electrode/chalk line method but I feel like a spring punch and compass would be easier.. and they're like $5?

[@MeltinMetalAnthony]

Just didn’t have one 🤷‍♂️

[@Jcreek201]

@@MeltinMetalAnthony Fair enough, adapt and and overcome. Good job!

[@fabiangonzalez1391]

Now it just needs a new subfloor. How much do you charge for that ?

[@1nvisible1]

*@**11:40** That spot is so tight you almost had to phone it in, but looks great.*

[@thomashouseal7486]

That's how you know he's a good fabricator cuz he don't give a fuk he does nice work lol 😆😆😆😆😆😆😆👍🤑🤑🤑🤑🤑🤑🤑

[@CaineDaCowboy]

Scarfing tip would have been perfect for you to cut those plates off that frame

[@FishFind3000]

0:05 didn’t blur the logo and 12:41 kinda missed the mark on that one. I heard that you can add some blur in KZbin after videos are posted but I’ve never tired so idk how true that is.

[@MeltinMetalAnthony]

Dam it. I think it moved when I cut a few bad shots. It’s hard to get right. Thanks for the heads up I’ll try to fix it

[@studboyspark]

Also if you’re going to blur the name/logo gotta blur the dot number. USA Tree Svc.

[@mikebougher3731]

Looks like next you can start on the floor of the box.

[@WelderB1Family]

Another great upload MMA!! How comes the company name on the side of the truck is blurred out? Is that your choice or was that customer request? 👨🏾‍🏭💰💯🤙🏿

[@georgelasala6588]

anthony i have millwalke and matabo on my rig have u put the ford 4x4 on the road

[@atomichurley]

How do you run an electrode oven on your work ute to keep the 7018's dry?

[@clintcowles7563]

Nice work man! And that is why I like to mock things up before finish welding.

[@sebastianbezuidenhout41]

The mechanic is going to have to repair alot of air pipes from the welding and torch use

[@stevenakn1]

Weld done Anthony 👍

[@ashtonbatterson5309]

Hey Anthony 👋. Great video, you do awesome work as always. thanks for making my day a lil better. Fuck Airgas!❤

[@dcwshoreline5416]

Great video man! How much did you charge for this repair?

[@billrandles8550]

Another mess up,knew he had the brackets upside down, but you all think he's the pro, not all of you.

[@MeltinMetalAnthony]

I just show my mess ups. You a liar if you say you don’t have them. I know you do because you have the time to watch and comment on my videos

[@georgelasala6588]

anthony y do you dont like millwalke powr tools

[@KingBigBabyJesus]

No, but more weld means better chance some of that shit gonna stick. If you can't tie a knot, tie a lot

[@jeremiec8014]

I stopped myself from chuckling at the fitting upside down thing because I did it a thousand times and I'm sure I will a thousand more lol

[@2bigted]

Hi from Ireland Nice welding job

[@donsmith9081]

Hello from California

[@OldGuy70s]

What Rod ya Use Man?

[@osbaldohernandez9174]

Awesome

[@johnjack8195]

The customer staring into the arc 😅😬🤧

[@MeltinMetalAnthony]

That’s the mechanic

[@crj1249]

12:42 lol

[@hankclingingsmith8707]

TELL IT LIKE IT IS. HOW THE HOUSE COMING

[@luisvilla799]

Question where are you located in the country

[@weldnrepair]

How do you like those 40 Grit pants from Deluth Trading? Do they hold up to the fire and burns?

[@MeltinMetalAnthony]

They are 2 years old so pretty good

[@clarocosmedelgado7673]

Where did you get the first mask you were wearing while you were grinding?

[@MeltinMetalAnthony]

amzn.to/3ZZfC9f

[@jonhy2x4]

Yeeee haw 🤠

[@weldingwelder]

That’s why we tack and try before we weld it out, can’t tell you how many times I’ve actually welded things out lmfao 😂

[@CP94]

Man, just a little late with pixelating the side of the truck at the very end!

[@dukyben733]

Are you flapwheel grinding in a paintball mask?

[@MeltinMetalAnthony]

Na that’s a bench mark abrasive grinding hopd

[@mariajacobs139]

It's kind of a weird time for that guy to decide to grease the truck🤣

[@osbaldohernandez9174]

Where did you get that cool hat

[@MeltinMetalAnthony]

My boy Luke and his dad own that company

[@osbaldohernandez9174]

@@MeltinMetalAnthony can you send a link brother i need one now

[@user-ru7jh5df9z]

Good gosh almighty- those previous welds were absolute garbage

[@jjsd250]

"you guys are doing clean jobs?" 🤣

[@factsforlife0O0]

10:52 MY GOD I feel bad for his eyes 💀

[@MeltinMetalAnthony]

Lmao