6G Stick Welding Test | Open Root 6010 & 7018

6G stick welding test open root with Welding Flyduck. 6010 root pass and hot pass followed by the fills and cap with 7018. Todays video also includes the fit-up. A good weld starts with a good fit check it out!
#WeldTube #WeldLife #Welding
WeldTube Store
www.weldlife.com/
WeldTube Social Media
Instagram: / weldtube
Facebook: / weldtube
TikTok: www.tiktok.com...

[@weldtube]

⬇Watch 6G TIG Video⬇ kzbin.info/www/bejne/q3-Waamon7KphdUsi=Nwmr6lScNJh6DaNw

[@VeritasEIREAequitas]

“Key to a good weld, is a good fit”. Such an understatement

[@TimeSurfer206]

As an Electrician who has also dabbled in Painting and Finish Carpentry, on a professional level, the 80/20 Rule applies: 80% of the work is preparing for the work.

[@VeritasEIREAequitas]

@@TimeSurfer206 very well said

[@wolfoftime1405]

Can't forget to take your time and get comfortable

[@VeritasEIREAequitas]

@@wolfoftime1405 💯

[@weldwizard]

How do you mean? I concur with him

[@joakimolsson3137]

as a license welder i can say this one's really well explained so for anyone who's watching to learn (and not just cuz they're a heckin nerd like me) this is how to weld pipe on a license level. good job @WeldTube

[@moseskongi4746]

What the f ck is a "licensed welder"? That's like someone saying they're a licensed dishwasher. You must be in europe or asstralia or somewhere like that.

[@Azerx997]

@@moseskongi4746 Certified Welder

[@moseskongi4746]

@@Azerx997 I always thought a "license" is different from a cert.

[@cesarmanzano9639]

Since when does a license/cert mean someone can weld?

[@jullejapp4895]

@@cesarmanzano9639 u must have license in Sweden to weld at work

[@davidcalhoun7202]

I finally passed my 6G welding test, thank you for this video.

[@erikbruce5141]

Well done and well explained.. I am a retired welder and the hardest thing is teaching noobies to relax and go with the flow.Cheers!

[@tom-vs3lf]

Hard to believe when I went to welding school in 1973 that we learned how to weld pipe by putting a 6010 root pass in and low hydrogen the rest of the way isn't it unreal that things are still done the same way 50 years later. What if your doctor or dentist did things exactly the same way they did 50 years ago

[@mmanshuu3259]

kzbin.info/www/bejne/lae6mYKJq62Zn8k pipeline

[@pocatefo1]

Debe tener mucho conocimiento valioso 👏 alguno de su familia siguió sus pasos?

[@elliottgarcia3658]

Hey, you know what? That is a very intriguing way to put it. Two different vocation but that still any interesting perspective, never really looked at it like that...

[@jacobb.4113]

@@elliottgarcia3658 i agree ive never looked at it like that

[@boricuaarecibo9259]

Same process new welder technology Microprocessor and inverters make welders lighter and more portable

[@Solorivera]

Best 6g video demo that I’ve seen. Great job thank you.

[@44_83]

lmao

[@ianlaker6980]

I've been welding for 40 years started with Gas welding then Arc with original Fleetweld 5s Great video. Used bridge sections rather than tacks just knock them off as you go round.

[@dolphincliffs8864]

I recieved a false welding education from St Cloud Technical Community College. This channel has taught me way more about technique,fit up and everything else . Thank you guys!

[@HTX.Jose28]

Same here I'm currently going to Houston community college and my instructor sucks. I've learned more from watching KZbin videos.

[@vo3751]

Same here, attended Southern Careers Institute-San Antonio 😅

[@deltathunderfalcon8512]

Thank Rosendo! You the man! I’m signed up to go the boot camp training for the boilermaker union next month, I’m not sure what to expect but these videos are definitely helping me grease the gears as I practice back at my local tech school. Much love brotha 🍻

[@brandonstrickland6444]

You mean apprenticeship class? If it's the way they did it when I went it'll be 2 weeks classroom, 1 week shop. 6-10s

[@deltathunderfalcon8512]

@@brandonstrickland6444 no not all. It was 3 weeks 6 10s, all shop. and constantly and I mean CONSTANTLY burning rod. I think I was going through about 5 pounds a day. They were very thorough, and professional with all the training. I walked out with two certifications, SMAW and FCAW.

[@daveallsopp320]

Pipe welding is a real art👍🏽👍🏽👍🏽

[@ninesixteengenetix]

Old-School Pipefitter/Boilermakers taught me to use about a 24" pipe wrench off the face of the outer side of pipe for your arm rest or tie your lead around the pipe for an armrest, even use a pipe stand. 6G Certified and X-Ray quality

[@kaisanimmortal]

OMG THANK YOU SO MUCH FOR THIS COMMENT. Definitely gonna use this trick. 👌👌👌

[@jcarrillo659]

This guy explains things very well, it would've been cool to have him as an instructor when I was there. Apart from the one and only Abraham.

[@shirleyblanchett607]

The best 6g pipe video I've ever seen on here. 33 years exp

[@suburbanbiology]

Your welding sure reminds me that I'm an amateur. Thanks for the in-depth description!

[@LadyLaDama]

I have certs but none for pipe welding, now I'm fortunate enough to be learning on the job and trying to learn a lil extra on downtime.👩‍🏭

[@nitrix3353]

I’m tryna learn rn too

[@setnbronco4932]

good description of what you are doing while actually welding and good arc shots. Nice job

[@sloopjohnb6640]

The best advice i got 40 years ago when learning to weld a 6G /6GR was weld one handed and use your other to balance and move freely as you weld it becomes like a wand in your hand a bit Harry Rooter u become a metal magician and your roots resemble a wedding band when complete unfortunately most of the amazing tradesmen who taught me these skills have long since passed but I still like to think their up their in Heaven hot passing and capping

[@aliroc53]

excelente demostración, muy claro ahora llevar a la practica. saludos desde Chile .

[@eduffy4937]

80% of total proccess time is setup, resulting in 20% welding time under the hood. If you rush setup to 20% of total proccess time, expect total time under the hood to grow to 80% with 20% quality.

[@marcelinosamelojr.n9584]

Thank you sir to share you tichniques. Now, im already NCll holder.. godbless sir

[@kentadriano8682]

im a welder student here in philipines. hi to all welders out here,

[@Warriorweldingtx]

Rosendo bringing that 🔥🔥🔥! Nice work brother!!! 💪

[@weldtube]

🤟

[@hirammartinez952]

Thank you buddy for your time I am taking some classes on welding at the moment to learn this look forward to it hopefully is a good pay as well as it’s fun as it is I hope I run into old-school welders to learn the old-school stuff as well I believe it’s always good to learn from the old to the new School 🙏👍🏼👍🏼up

[@chrism8850]

I remember as an apprentice being told to just watch and learn. Some really good welders aren't good at teaching, or explaining what they do. This is great though, really good video.

[@markadams3047]

Thanks bro I have to weld a 36 inch pipe next week nice work.

[@scottmatusek2691]

I remember taking my test with a 2" pipe in 6g , pain in the butt, that 6" pipe so much easier to do.

[@chief5981]

Did u take the UA VIP career course?

[@scottysutherland3568]

Great video! Excellent job explaining everything strp by step to help a student in need 👏👍

[@BrazilWeldsMessiasCarvalho]

Hi friends, Root pass (+) Reverse Polarity or (-) Straight Polarity.

[@JacobYamba-rq5tt]

This is an awesome demonstration in how to weld pipes being a welding instructor give you 💯

[@johnvonmartin7501]

Seeing him weave both left and right still in steady mode left me speechless.

[@leomongiello4714]

finally a 6g stick video

[@Austie420]

awesome stuff im heading into a Boilers apprentice rogram in a few weeks and im new to 6g so watching this helped me learn the movements of the ody to keep the rod in the center of the pipe as im working along, ive got my 6010 stiching down pretty good but need to work on that fill and cap

[@shannonsayazie1652]

Oh man I love castle rentals and knowing your products are there sweet! I’m like a kid in a candy shop everytime I go there

[@MathewGarofalo]

Just finished this at school. I liked 1/8 land with a zipped thru root opening. Straight drag root pass. Cap is the hardest part of this test

[@djwill1481]

Did u have 3/32 gap?

[@nicholugrim1108]

should have watch this before my assessment. from PH

[@Broski2322]

accept the burn ignore the pain when your on a role and flowing

[@leopoldpoppenberger8692]

100% right

[@alecj9227]

you won’t be saying that once you get a REAL burn

[@paulmattox]

when its sizzling you know its going in . iv not done stick welding in about 10 years and used to find it easy doing pipe. i started a new job February and got to do a 6g stick and 6g Tig weld test. im not looking forward to it haha. nice video

[@autodidacticartisan]

If youre ten years rusty, your screwed. Ant chance you can get a couple practice runs?

[@bernardedyvean7436]

Awesome way this explained the welding. I started welding at age 4, at my grandfather's shop. But the newer welders use tigg welding to do the first pass. Id trusted this guys welding over the tigg. Tigg is like welding with and Oxygen an Asetalin.

[@dennisgray7509]

I’m learning from your videos. Great content

[@jackphilipp633]

Weld tube, would you guys consider doing a video on the 6GR test that is common for welding offshore? I failed one. 3/16” root gap, top pipe had no bevel it was flat and there was a steep bevel on the bottom pipe w no land. Restriction plate on top. Root was to be performed with a 3/32 7018🤯. Top pipe was thicker than the bottom pipe. Both had an OD of 6”.

[@j.k_steel_fabrication]

Steel Box Railing installation 👇kzbin.info/www/bejne/jJCXoKeridRqrbs

[@spid3rmike117]

Jack Phillip that sounds like a nightmare. I'm 2 months into welding school and practicing pipe after hours while the rest of the class is still on T-joints lol. Anything new seems

[@spid3rmike117]

Tough but it gets much easier once you break past each difficulty spike

[@hamisindabagoye7724]

I'm still learning about welding,cookie from 🇹🇿🇹🇿

[@luisgeremiasantanamateo794]

Geremia . I"m from D.R. Like the welding very mucho.ok My friend.

[@jeepwk6.5L]

I’ve NEVER had lof with only grinding one side of the tack. If you leave a keyhole you can come back off the keyhole… the tie in coming into a tack is the critical part to grind.

[@trodapulse5581]

It’s crazy how he’s teaching you something that somebody called him

[@kurtmiller8773]

I love how you get straight to the point great vid gonna sub

[@lianrevlis]

When I welded my ASME 6-G test it was 6010 root, 3/32 7018 hot pass and fill and cap with 1/8 7018. It would have been much easier with 3/32 7018 all the way.

[@bengkelaro3380]

nice to meet you I'm from Indonesia 🇮🇩🇮🇩🇮🇩🇮🇩🇮🇩

[@chriszaragoza4516]

Can someone explain the 6010 hot pass? I’ve been taught that is a strict no. For us it is always 6010 root and 7018 all the way out after root

[@danielposke3577]

Real clean work bro.

[@jlssculpturedesign8140]

That's a great tutorial on the 6G weld test.

[@thaddeusgoodsonfamous8494]

Nice one bro, you really pulled it off smoothly. Got a text next week for a job. Your tips were helpful. Thanks for sharing

[@billmoore1936]

Yes and when you can weld a G6 you can weld is one of the hardest test pieces there is

[@chrisheiney8469]

That pirarucu head gear is siiick!

[@theslaminator]

6010 drag down root opening. 6010 puddle cap ( high arc length 1/4” out 1/8” in). Make sure flush then Cap circles.

[@ashleyvan1300]

Great job explaining 👏 Thank you 🤘

[@elky1883]

Great show ...im 65 welded all my life nowi realise ehy my neck hurts so much all the crazy positions and not moving or breathing till rod down lol

[@asmaanse6554]

Really superb explanation. Can you make any video about welder health.if he doing in unhealthy environments and inhale every day smoke what should he do for his lungs health and how to get clean lungs.every day in morning I spit out from my throat and get lots of rust and smoke in my sputum.i use 3M mask but fectory environment is very unhealthy and theirs not much safety parameters. Am compel kindly guide me.😢😢

[@sandymacniven2872]

Great explanation as always and fabulous job

[@JoseLara-io2uv]

I wish I knew some of these techniques I would’ve done well on my test

[@WELDERMADEHEADBANDS]

Great video Rosendo , excellent explanation and technique 💯

[@erikmason181]

I’m right handed and actually do well on that side I kinda struggle with my left side pipe but I learned to use my left hand

[@jimsturwold5424]

One of my favorite welds!

[@bayetaheinricha-oh7wv]

its really hard to learn welding if your father is teaching you how to weld hes like gordon Ramsay every wrong move you make hes gonna roast you but at least you learn😂😂😂

[@xdominion330]

I love E7018 electrode, only disadvantage of this electrode is that if the fumes contact with your eyes, it's hardly you open your eyes at night👀

[@ryanbeard1119]

Were you javing a problem w the keyhole opening up way too much, is metal suposed to flow around it?. Can you do videos on how the tie ins are done in the feild. doesnt the pipe welder have to appriove if its good enough

[@jseadog1394]

Great instruction! I find myself watching these videos like a 16 year old gets sucked into tiktok. So, on a 6G it looks like I need to manipulate my wrist while maintaining the relative same travel and work angle? Gonna be tough, but I'm up for it. Thanks again!

[@donleejr7624]

Run the root with a 5P + at 85 amps hot past with a 7018 at 90 amps 3/32 ALL the way

[@user-so6ze2os6d]

hi sir i watch your video i want to learn welding i love you i am from india

[@russellmiguez9401]

I know plenty of welding inspectors would never let you grind a groove in the pipe to cap it.Years ago we used to be able to file our edges of our caps to dress it up, but for years now you can't put a file on it at all.

[@lawrencechapman8394]

I grind the guide line lightly just between the inside of the bevel and the bead. That way, I’m not causing any damage or integrity issue to the pipe outside of the beveled/groove region. The line is in the weld essentially and then gets absorbed back with the cover up. That was exactly how CWI taught me to do it. I guess if I run into the ones who won’t let me do it way then I’ll figure something out.

[@russellmiguez9401]

@@lawrencechapman8394 it wasn't meant as disrespect in no means, I was just stating That most inspectors today wouldn't allow it.

[@russellmiguez9401]

And it is easier as a guide to follow with a lite groove in it.

[@danielposke3577]

Is that right? Learning at Tulsa Welding Dallas campus, currently. Good to know.

[@taufiqurfaturrachman2960]

am getting soft from your video, thx alot. how do i make my soft more than 50sec long? I clicked loop recording, pressed the record

[@TylerContatore]

hey, I'm currently enrolled in Tulsa welding school in Houston TX. I was just curious about your technique you used when tacking. could you possibly describe or make a video only about that so I could learn how to do it too. them beads looking absolutely mint👌

[@fuska9471]

Get that Rod Between the pipe make the gap. Tac one side. Before you weld the other tac Put the spacer back in and hit the pipe together to close the gap because when you tac one side it begins to change shape And bend so you gotta make sure you get out back in the same gap or else half your pipe gonna be wider so make sure you get that gap closed on the Tac and you good to go

[@moseskongi4746]

How in the f ck do you go to a weld school, yet want to know how to put in a simple tack? Unreal, but then again, tws is trash. Alot of their grads never even get a job.

[@lucideuphoria7092]

He's using a flicking back/forth technique due to the digging arc of the 6010 cellulose electrode. Some people have a more pronounced back/Firth flick while using cellulose electrodes. When welding a clean joint with no gap and a large land, it's not so much needed, but when running a gap and thin land on pipe, the digging arc of the cellulose electrodes can cause the keyhole to blow out.

[@melchormansueto1157]

Gd day sir i like that your welding procedure im also a welder combination

[@sudimantanker]

Very nice sir your tutorial welding 6g good luck good job amen

[@j.d.m.6512]

Saludos mi chingon excelente clase saludos desde Chicago il👍🇲🇽

[@jan4751]

Well done, greetings from the Netherlands

[@nathkrupa3463]

Purfect showed pipe welding skills thanks sir. Sir welding machine running hours continuously or not ?

[@jeremywatterson9594]

Great job and demonstration as always Rosendo!

[@24k__21]

Show tips for the guide line in next video, example what wheel to use, how high to go, etc etc

[@commietube4273]

Yeah. Most UA welds we aren’t allowed to cut into the base metal. Please tell us the secret. Is it with a cut off wheel?

[@JohnMacreg]

I learned a lot thank you for the uploader

[@yoBeVlog]

very helpful for newbies like us thank you

[@keenanepps2543]

I like your videos breh big ups, the key is to reading that puddle i made it so hard ar first wish I was looking at your videos while I was trying to get it Burn to learn And you will eventually earn

[@doctorsleep3414]

Una pasada este canal y grandes soldadores auntenticos pros carayo

[@dimitri5805]

7018 root 7018 hot pass weave fill all 115 amps grind to sound metal between passes .cap pass 125 Amp.

[@petersipp5247]

I run a little cooler on the root. Found in the bend tests...too much "whipping" in the root allows our atmosphere to enter the molten puddle. Not ok! So, I make a small circle, bumping each wall. Of course, pointing the rod either ahead/behind depending on root opening. That breaks down the walls..."juust right"...like Goldy Locks says it.

[@burn_learnearn_welding7101]

I need to start getting back Into 6010 uphill but I love downhill to much that i don’t want to

[@matthiasonphillips6323]

Same man! On a job tig'n some stainless. After a year of welding downhill.

[@Royalewitchee]

practice practice get used to it

[@saqibmughal3360]

great i understand also this weldeing .great job.🤗

[@amodinho32]

I use an structuralv profile in L to align perfectly both tubes before welding the first three short welding seam.( Sorry. I'm not English speaker. I don't know if I'm using the right expressions). Then, you don't need to check inside of they are ok. All the root is going to be perfect.

[@nahhh...]

I failed my WQT last week and I should've watched this sooner hahahah

[@JMMM-p8z]

good job... wondering why you step the rod on the root? i just drag it with a perfect fit up..,

[@Broski2322]

Prep is everything

[@elroyjetson5640]

I've been an ironworker for about 6 years and Now it's time to hang up my belt and become PipeWelder....

[@eliasojeda1044]

How many amps did u do the root , and how much dig did u put

[@pompilioortega3528]

Me llamo pompilio Ortega Soy de Honduras me gusta tú trabajo Saludos

[@juanvelez6589]

Pienso que la posición del welder q utiliza es muy incomoda y agarrar el electrodo con la mano da estabilidad pero se calienta mucho.

[@dangerzone6023]

what should be the maximum root gap in pipe welding

[@leopoldpoppenberger8692]

B pressure from Red deer nicely done --good fit is a 1/2 Weld

[@abbassadeqpour7327]

Please translate Persian🇮🇷 please☹️ you are the master of the blacksmith and I would like to be your student

[@agung723]

Good skill mr also

[@royalcocer5381]

good weld Rosendo