Well.......This Really Sucks!

#fabrats #brokedown #gmcyukon
In today's episode, Michelle finds herself in a predicament no one wants to be in. Plus, we go get the donor truck for the Rat Rod tow truck! Check it out!
Make sure to follow along with us as we build and fabricate cool stuff!!
Get your own Fab Rat's Apparel Here:
www.thefabrats.com/
More Fab Rat Videos you'll love!
You Won't Believe What's Under The Hood Of This Classic Car!
• You Won't Believe What...
It’s A Bit Tippy! Could This Be The FJ45 Ultimate Rock Crawler’s First Roll Over?
• It’s A Bit Tippy! Coul...
I Can't Believe This! Barn Find Of The Century!
• I Can't Believe This! ...
Check out Fab Rat's Recovery Gear by Yankum Ropes!!
yankum.com/products/fab-rats-...
Use coupon code FABRATS at checkout to save 10% on your order!
Follow us on Instagram: FabRats
And THE FAB RATS Facebook page: / thefabrats
For business inquiries please email us at: [e-mail]
Shipping Address:
Fab Rats
P.O. Box 234 or General Delivery
Glendale, UT 84729

[@MiloslavRyndenkov]

I applaud Michelle for pulling over and shutting her down, most people just keep on rolling until the engine locks up.

[@tysleight]

Hindsight being 20/20 and all, she would have been fine driving all day. So in this isolated case "most people" would have been okay. Ps I get a shut down alarm and it goes into limp mode if the gas cap is loose. Stupid sensor.

[@jeffrentsch4318]

My first engine swap was because my older (middle) brother drove Honda with oil light on. He checked and had oil pump had died... I was 14

[@Skorpychan]

She's married to a mechanic; she knows to stop when the light says stop.

[@johnmcmickle5685]

@@Skorpychan She might be afraid of what Paul would put back in the vehicle and other modifications that might happen during the process.

[@Beandiptheredneck]

@@johnmcmickle5685 it'd end up with a dana 60 under the front with a 6.0l 😅

[@joeloughmiller2189]

I heard Michelle say Calvary instead of Cavalry and the hymn started playing in my head. :-)

[@psg6314]

Your dad would be proud to see that the wrecker is getting some love and great job and video

[@paulriversred738]

Im sure he's setting thier in that chair in the shop he always set in just watching lol

[@danmooney7192]

Auto repair is so much more enjoyable when you can watch it being done, instead of doing it!

[@danbrooks8241]

Truth

[@Moa316]

Such an epic walk. It's like a sheriff and his deputy walking in the sunset towards the tow truck. Epic

[@winstonsmith313]

3:38 - I never thought I‘d see Paul using an OBD2 scanner. Looks totally alien in his hand. He‘s more comfortable using one of his many “-crometers”.

[@saucercrabzero]

Paul's way more used to the OBD0 scanner!

[@rodneyclements6190]

Tow truck build is a winner... I'm locked in!! Also, it would be pretty cool to pay homage to Pop by doing it proper with Pop's Towing on the doors in true shop truck format. Just my humble opinion.

[@tuckerryan3587]

That’s pretty funny about the “rod knock” noise. I just had the same thing happen with my derby motor. Heard a knock took it apart. Found the loose flex plate but stripped the motor down anyways to make sure. Turns out it was just the flex plate. Live and learn !

[@lsnowy7758]

When that big red "STOP! " appears on the dash so does your heart!!

[@devo196047]

When you were loosening a tight bolt with a a ratchet, it reminded me of a mechanic my parents used to use who said "whenever I see a Chrysler I know there's going to be blood".

[@55desotomine]

Mopars are easy, Fords are backwards and completely alien. Try working on a corvette, NOTHING is where it's supposed to be!

[@disgruntledegghead6923]

I had to do the oil pressure sending unit on my LS swapped S10 again just the other day. It didn't want to come out with just a ratchet, and if it did there was going to be blood. I just grabbed my 1/2" Milwaukee and bumped it out. Easy peasy.

[@Wes.Crump00]

I own one and have done most of the work on a 98 short bed single cab 5.2/318 LA Magnum

[@javabeanz8549]

LoL! I love my Dodges and Plymouths, but yes, there's been blood more than a few times.

[@Tom-bo2wj]

You seam to have the best assortment of square body’s around. Also happy to see dads truck getting some love

[@craigpridemore5831]

I was loving Landen cutting out fenders just like his dad does on the big ones. lol

[@twotwentyswift]

That was Jace!

[@MrFozzie52]

"Trimmin the old fenders" - sounded just like his dad

[@Patrick.Weightman]

Hmmm wonder where he got that idea 😂 What good kids

[@dennispalmer6007]

Looks like Rory might have stirred up some tow truck fever.☑️🇨🇦

[@dickclough1168]

Dennis, where are your from??

[@jimmylarge1148]

Paul’s tow has been around longer than rorys.

[@AKUSUXs]

Someday I will be able to get me a Chevy square body. Every time I see one, it reminds me of working with my grandpa. Everything from digging trenches, plumbing, using a backhoe, drilling in rock, adding dynamite, and the best part...blowing up rock. There were also several times we would play catch in his backyard on those wonderful summer evenings. I can still picture everything as it was yesterday.

[@yknott9873]

Famous last words? "It still runs. We're gonna' fix that..." ;)

[@derekbarrineau8519]

My wife’s Tahoe 5.3 did the low oil pressure thing. I replaced sending unit and screen fixed it for a week then started doing it again. I replaced the oil pump and oil pickup tube o-ring (also added the second bolt to pickup tube). After a few weeks starting doing it again. I finally fixed it by replacing the oil pressure relief valve (in the oil pan next to the oil filter). When the motor would go into 4 cylinder mode the relief valve would let off some pressure but then would stick open causing low oil pressure. I have put over 90k miles on it since then.

[@genechoate5020]

My wife’s 2016 suburban sheared a lifter lock pin, so I did an AFM delete and feels like it evened gained a few ponies.

[@rossgross7497]

Can't wait to watch this build. Proud of Michelle for pulling over. She saved you in the long run.

[@tombostian8255]

I can just see Papa Sherm smiling down from Heaven! Looking forward to seeing you get this one finished! Gonna enjoy watching you do the work to it & using it when you're done!

[@edwardgriffin8092]

Your Dad will be smiling at you for not just keeping an old truck as he had it. Upgrade it and use it as he would have. Nothing stays the same forever. They call it progress, i call it living. Thank you Michelle, Paul, and your boys for sharing part of your life with us, (Randall, sorry if the spellings wrong, Randall is included with the boys :-) ).

[@stevedeornellis8657]

I'm going to go out on a limb and say THIS IS GRANDPA SHERM APPROVED!!

[@defiant4698]

Can't wait to see the next evolution of the Sherminator rig. He's smiling down on you!

[@detroitdiy]

My 5.3 has done that multiple times. Last time I stuck a clear hose in the threads of the block, with the screen out of course unplugged the coils and cranked it over until I purged about 3 quarts of oil. Put it back together and haven't had a plug up since. Flushing that oil galley out was key. Great video guys.

[@robdittes5228]

I just had my oil pump replaced in my 2014 Silverado 5.3L. I had the code P06DD. There was also a whine coming from the front of the motor which sounded like power steering. That is the sound of the cracked pump housing.. I hope this info helps someone. I would hate to see someone wreck a good engine. Mine had 80k miles.

[@highmarkrich]

Such a good lesson on properly diagnosing problems. Good truck shut down over a simple fix.

[@1oldskoolluvr]

@1:06 mark: "startin' to think it's ok." 😆👍🏻👍🏻

[@Raddadshop]

Can’t wait to see this project progress and hit the trail. Rolling driving legacy to the old man

[@ModernDayTemplar606]

I’m very happy to see the tow truck getting some love. A BBC that is built to breathe coupled to a 400 is a pure stump pulling torque monster. That’s how you build a real old school wrecker. Thanks FabRats

[@olehickoryoutdoors6815]

I love the sound of the tow truck and how you and your family work and enjoy life together.

[@novavroomvroom6809]

Can't wait to see the tow truck done... Your father is sitting in a fluffy lazy chair sipping on coffee in heaven watching you build up his old reliable tow truck....!!!!

[@64jazdude]

Our Daddy’s are watching down & smiling. Keep building & spending quality time with your beautiful family.

[@billmccullough2323]

That was smart, fixing Michelle's Yukon before you fixed something else!!!! Gotta take care of the BOSS!!!!

[@johnme7049]

I have to admit I was grunting right there with you when you were struggling with those bolts. :D:D Sometimes you just have to hold your mouth right for it to work. Thankfully Michelle's ride was a simple-ish fix. They don't make anything easy anymore. Good to see the tow truck getting some love. I'm looking forward to that, but truth be told, I'm just happy to be here, hanging out with you. Good times, be safe and God Bless.

[@jimmyjenkins9240]

This is going to be a fun build! Waiting on parts 😬 … that is today’s lament for all builders and fabricators. At least you didn’t have to wait on the engine and transmission!

[@jeffrentsch4318]

I waited 3 months to get engine and transmission started the build, broke my ankle at work, now nearly a month into waiting on bone healing. Must say would rather wait on parts than healing. Can do other things waiting parts all I can do is keep my foot up, surgeon said swelling is enemy of healing...

[@iamie153]

Michelle 'so i called in the Calvary"? I chuckled for a while over that one. Thanks Michelle.

[@dustytrailscactusron]

Ahhhh... so nice. You pull at my heart strings when you mess with them square body GM trucks, man. That's the machine I'm most familiar with. Grew up right in the middle of them, wrenching and cussin' and smilin'. Thank you. (sniff)

[@mikemiller9119]

I love your neighbors house. That’s the best wrap around porch I’ve seen.

[@mwfarms]

Got lucky on the motor Paul. My sister bought a '86 K20 a couple years ago. She wanted to build it and have a good 4wd. Was told the motor was locked up. She bought it for $300. When I was working on it I figured out the ac compressor was locked up and the belt was so tight it was holding the motor. Took the belt off and motor turned freely. The poor truck sat for 13 years on a misdiagnosis. We swapped the motor anyway. It was a 292 and she wanted a 350. Sometimes you get lucky. Take care Paul. Love your videos.

[@Motovader72]

@ 3:48 As she drives away with a burnt out brake light. LMAO

[@charleskendall4509]

Nothing better than seeing pops old tow truck getting some love for today's episode. Glad to see the smile back on Paul's face knowing she's getting some major upgrades!

[@digitalcamera3237]

Cool episode guys! As always... Great editing! One of these days you'll have to do an RC rock crawler episode.

[@muku5217]

Sweet Video! you need to get those Elk Horns hanging in your shop.

[@robpeabo509]

Good on Michelle for taking heed of the GMC's warning lights. A lot of people wouldn't. Fortunately it was only the sensor, but you don't know that when you are driving. The tow truck will be a more functional beast after you have finished the upgrades.

[@CoreyCynthiaDavis]

That's Awesome with the Ole wrecker! Y'all have a great day 🤟

[@higgins8112]

Paul I just wanted to say sorry for your loss it's hard losing your Dad I'm going thru the same thing my Dad passed a few days before Xmas I still expect him to walk in the front door every morning it sucks. Wish I had one more day with him. He loved your videos he would watch them with me. Can't wait to see the new tow truck

[@brianbarney7901]

Love that square body tow truck.

[@Harborman253]

I think Michelle is a wonderful person and love seeing her in the shop. I enjoy her humor and especially, "name that part with Michelle."

[@DaffyDuc69]

I got bit by those convertor bolts just a few years ago. Had a bad knock like that, and starting pulling the engine apart to go through the valve train and checking things out. Get to a point with everything off and go rotate the motor by hand to check for damage to the lower end. And it STOPS hard at one point. So go 360 the other way and does the same thing.. Finally pull the cover off and sure enough, bolt is lose and hitting... Tore it all apart for nothing.. But at least it got new gaskets and timing chains.. (Jeep 4.7)

[@gordbaker896]

Sometimes there is a tiny screen below those oil pressure switches . Hard to see and remove but does require cleaning. Well done Michelle.

[@iffykidmn8170]

Would that be the one he mentioned in the video at 2:37 using a 5/16 bolt to remove?

[@gordbaker896]

@@iffykidmn8170 NO, it is a small dished screen not part of the sending unit but beneath it. Perhaps only on SMB chevy V8 engines.

[@kevinbode6483]

I always enjoyed sitting on the inner fender well and working on engines when there was room.

[@TheOldaz1]

Bonus 400, can't complain about that. Another great project started. Thanks Paul.

[@pnwRC.]

LOVE the RC portions in the vidja! I was wondering how long it'd be, before you gave that ole tow truck some TLC, & much needed upgrades!

[@malcolmcrawford261]

Years ago my dad's 76 Silverado started knocking like crazy at idle, and got to the point that it sounded like it was gonna toss its rods as any moment, but smoothed out as rpms increased. It also leaked oil from every gasket. We prepped a new heart for her and found the source of the knock wasn't the rods at all, dust shield looked the same as yours, however it wasn't the torque converter bolts. The fly wheel ended up being broke between all but 2 flywheel bolts.

[@saewoody6366]

That oil pressure sending unit is a royal pain!!! You have more patience than I do. I waited until I had to replace my intake gaskets. That made the job way easier!

[@ltcg]

"wrap that around an a-arm" Have you ever seen a Razor with intact a-arms? That's the number one reason you'll be towing them to start with!

[@michelekuhne9179]

That’s what I thought too!

[@kccreations5945]

I love how pulling a motor, transmission, etc. is just so nonchalant for you guys! Such a cool skill to have and to teach your kids to do! Thanks for sharing!

[@55desotomine]

It's easy with a lift and a shop full of tools, out in the yard it's crap.

[@kccreations5945]

@@55desotomine Haha I’m sure that makes it easier but id have a hard time figuring out what all needed to come off prior to pulling it! I’d rip something out for sure lol

[@spiderwebb4983]

@@55desotomine Yes I agree but we all started doing stuff in the rain scrambling about on the floor. Had my own workshop once but now back to doing it all outdoors again at age of 60, you do what you have to do, takes longer, hurts more but the satisfaction on completion is immense.

[@loose-arrow-garage]

I can relate to Paul 100%. I hate working on new stuff. I let the wife have the newer car and I drive older trucks because I like the simplicity. If the wife's car needs maintenance most of the time I have it done at a shop!

[@jeffrentsch4318]

I don't mind working on new stuff, hate driving nanny new stuff. Heck I am not happy with automatic transmission for me to drive. Kinda like talking to vehicles with computers.

[@jonboi2527]

I cant express enough. In a world gone crazy with everything going on over seas. Fab rats, MORR, Robby Layton, trail mater, bleepinjeeps, mischief maker, etc is my outlet from all that may cause stress. Everytime i watch this channel and see the strong bond paul has with his wife, kids, pals and of course his mom and dad it gives me such a positive energy to get my own projects done with great enthusiasm and appreciation. Love the work keep it up fab rats crew!

[@user-dx5oj5eu7z]

Gotta love the sound of the tow truck. Whoever disagrees, get your asss back to planting flowers in your aircon garden

[@carllafong9368]

Love Scout the shop dog!

[@davidveatch5145]

Everytime I see that 60s Chevy in the background I miss my old truck. Bought it from my Mom but had to sell it after she died and I got married to make ends meet. Love your videos

[@KarateSensei71]

I have done this a few times on Chey 5.3L engines those sensors are garbage. My first step is a RotoZip bit in my Dremel to cut that "noise shield" plastic cover that blocks all access to the sensor. Shop manuals call for removing fuel lines, vacuum lines, etc, you just need better access. After that it is easy to remove, I also use a 5 inch long 5/16" fine thread bolt to gently engage the filter and remove it just like Paul did, works better than a pick. Excellent job Paul!!

[@carguy_tmh]

That was too nice of a square body to part out. 400 sbc and th400, that would be awesome! But I understand needing the trans for the tow truck, working a clutch on those recoveries is an extra inconvenience you dont need.

[@rodgerkennedy4012]

That’s what I said

[@markcargile]

Michelle, you’re so adorable! You didn’t call in the “Calvary” (an open-air representation of the crucifixion of Jesus), you called in the “cavalry” (an army component mounted on horseback) LOL. New segment for the videos…”what’s this word, with Michelle!” HAAAHAHA. These videos just wouldn’t be as entertaining without you girl!

[@avlisk]

I like your gentle way of pointing this out. And if she is prone to malapropisms, it could make for a fun segment.

[@nathangreer8219]

I'd say, if things are at their worst, call in both.

[@CountryAndClassics]

Very good example here on how hard it is working on these newer vehicles & why I got our of the trade as a Mechanic. I already new in last upgrade course with BMW that I had That by the turn of the century, Manufacturers were out to STOP the back yard mechanic & I said then, "That's BS!!" I prefer "Old School" for sure & used to enjoy working on Vehicles. Give Me the Old any day!!

[@andyrbush]

I met a guy trying to fit a fuel pressure relief valve to his BMW. I think he is still trying. He may end up needing a completely new fuel rail. A pal told me that in the UK a head light for another BMW was going to cost $8,000. Its unbelievable. I did look at a Mercedes in the USA, the major service was going to be $5,000. The old stuff worked just fine.

[@GuyChapman]

Yeah. My first car was an original Mini. You mended it with a 1/2" AF spanner and a selection of hammers. Now I have a Volvo PHEV, and I am unlikely ever even to put oil in it myself. But hot damn, that mofo is fast!

[@BurntTransGarage]

Nice shout-out to Offroad Design. Love those guys!

[@tonyincs]

Awesome to see Paul down at my level for a millisecond! My "newest" vehicle is a 1999. There is a reason for that! And not just the old school "sweet Kenwood"..

[@francesrice7898]

Awesome blessing there. God is good. That wrecker will be getter done for sure. ❤️❤️❤️❤️❤️👍👍👍👍👍👍❤️❤️❤️❤️❤️

[@mattmcdonough707]

Heck Yea ! One of my favorite rigs on the channel getting some love !

[@JanetStMary]

Glad Michelle was back on the road. We can hardly wait to see what you do with your Dad's tow truck,

[@alexduke5402]

Yep I've done one of those. They are all the way back in there where the block numbers were. I said he'll with it and pulled the intake though

[@jacobthornock317]

I just did one of those on my 07 yukon. Got me some new scars from reaching under and behind it. I even lost my screen and couldn't find it even with my camera so off to town again to get one. So glad it was the issue and not the pump or o-ring.

[@4sl648]

Oil pressure on my 5.3L Sunburnman dropped quickly to the point of the alarm that Michelle got. Regular oil changes and it was not due yet. I was mentally preparing myself to go after the oil pump pickup o ring. After looking at the oil flow diagram, decided to fast and pray and replace the oil filter. Shazam! That filter had plugged up for some reason (maybe disposable wipes). High quality filters have prevented it since. Glad yours was only a sensor/screen.

[@brucewilson1118]

Lmao Paul says he’s old school but likes LS’s😂😂😂

[@jhawk1985]

So glad to see the family getting into rc's. You need to get a basher to jump and go fast. They make rc's that easily run over 50mph out of the box

[@larrydavidson3402]

Good job Michelle on shutting things down right away. Your dad is very proud right now Paul, the wrecker is getting some love and TLC.

[@machine7767]

Loved the "not taking itself out too fast " and leaking gas tanks are ok

[@TangoAlpha83]

I did the oil pressure sensor on my 6.2 Yukon Denali. Take the transmission mount loose and jack it up. Gives you much more firewall clearance.

[@danhambrick6331]

You had my attention when you said the wrecker was getting a big block..😁😁👍👍💪

[@aliceevans3357]

I don't like new stuff either! I wonder how much a shop would have charged to fix Michelle's vehicle. They would probably have tried to upcharge- tell you it needs multiple other things. I had to laugh at Jace, just like his dad using an eyecromineter to trim the fender wheels on his RC. It's looking good there son. Glad you're going to be pumping some new life in your dad's wrecker. It will be much used- hopefully not on Michelle's vehicle! 😉 Love watching you guys. Stay safe and GOD bless

[@bigrig4630]

Hell yeah can't wait to see the rest of the build. Love the tow truck videos

[@tomburke3401]

They are a pain in the a$$ to get to. I did 2 in my 13 silverado. Hats off to Michelle for paying attention and "making a call" lol I am sure your dad is smiling on you for taking good care of the old truck. Keep up the great content and God bless.

[@7_slot_fawkes698]

A 203/205 doubler is a 4:1, or more technically a 3.96:1. Still a great set up though! Especially For that rig.

[@babyduckmilitia2186]

Maybe he is doing the 3:1 low range in the 205?

[@JasonAJames]

I did that same sensor and screen on a Silverado 2 weeks ago..... Also solved my low oil pressure situation. All good now.

[@troybilt6752]

Thank you for your time.

[@paulquiroz4070]

What a nice find on that motor... Txs George!! LOL

[@karlschwaber7006]

You have to have power steering to do proper doughnuts. I love it!

[@richardcracroft2139]

I need to change the oil pressure sensor on my Suburban, thanks for the bolt trick!

[@darrellallen1601]

I had a 2007 Acadia and the oil pressure issue ended NOT being the pressure sensor/switch. Our engine ended up going south due to loss of oil pressure. Believe it had to do with failed oil pump.

[@BladeHQ]

Paul and Michelle, this I awesome. I love the idea of the tow truck. Rory has gotten to you. lol. Michelle is the OG camera girl. -Dallas

[@shane_7even_ten569]

His tow truck is waaaaay older than trail mater. It was Paul’s dad’s truck

[@justinauker8901]

I've personally done the oil pressure sensor on my '03 Tahoe with a 5.3- twice! Its about the same setup as this. Its definitely a "do it by feel" job. I never could get the filter out, but that bolt trick looks slick!

[@davidclemens1578]

It seems sad that you have a part that has to be changed more often than a spark plug. Therefore it should be more accessible

[@justinauker8901]

@@davidclemens1578 The first replacement oil sensor (from O'Reillys) malfunctioned in less than a year, and so I got a a warenty replacement. Generally they should last >100k. It actually only took maybe 20 minutes the first time, and maybe 10 the second time at the most.

[@MrGaryGG48]

@@davidclemens1578 I think the attitude at the dealer is that it is easy to access... on an engine stand!! They don't want you to work on it to begin with. I used to enjoy working on my 240Z cars; I had several many years ago. The most complicated electronic device in the car was the radio. I could pull the tranny to change the clutch by lowering it onto my chest, rolled a bit to one side and slid the gearbox out from under the car. The whole clutch job didn't take more than a couple of hours and that included cleaning everything while I was down there. Then some "Smog Engineer" discovered the "Computer" and the rest of the story went straight down the toilet!!

[@My2cents.]

One doesn’t experience self transcendence, the illusion of self only dissipates ~ 🎈

[@jeffashleycamp9797]

I feel your pain, had to do one of those oil pressure sensors this year as well

[@Minionmoto529]

That's awesome. Every time i watch y'alls videos i just wanna go to my junkyard and start building a beater truck just because.

[@ladonnaghareeb4609]

This is LaDonna's husband, I love watching you folks. Your videos are so good that they seem to fly by and never seem as long as they say they are. Thank you!

[@joeintheus.3438]

Good jobs on fixing the Yukon but you missed the drivers side brake light. At 3:48 it is not on. Great videos. Looking forward to the tow truck upgrades.

[@tyendor503]

Good eye! ... I had to stop the video and advance it one frame at a time to see it. While doing that I was able to see that the 3rd light actually comes on 1st and then 2 frames later the other one lights up.That was good comparison of the speed of LEDs vs incandescents.

[@1944chevytruck]

good job everyone!....great projects!...thanks 4 video. be kind.

[@CB-ch6jw]

Super cool that you're gonna be loving on the wrecker! Looking forward to seeing the transformation! Building more memories!

[@wesleytull8667]

The tow truck is my favorite of all your rigs. I’m glad to see that your going to be digging in to it. Keep up the awesome videos.

[@nuttinbedder2do70]

Paul I am the same. I hate working on new stuff! I can't even reset my wifes 2019 Subaru TPS sensor when i swap seasonal tires. Love my 2004 TJ click ignition 3x spits out codes on odometer thats about as advanced as I like it. My 1981 El Camino with a 350 is the sweet spot but cut my teeth on a 1979 280ZX with an inline six which is why I took to my Tj so quickly.

[@robmitchell4417]

I agree on that working on the new vehicle thing. Did a kid say a dad was right. I've heard that happens one in a great length of time

[@scoobydoo885]

thanks Paul. 5/16 bolt to remove the screen. I kept using a 90% pick. I'll never forget this one. Going to pass this one to my son. we both drive the 5.3