Weller Racing YXZ1000R Clutch Upgrade / Install

  Рет қаралды 42,063

Weller Racing

Weller Racing

Күн бұрын

Пікірлер: 14
@steveturcotte3245
@steveturcotte3245 8 жыл бұрын
Thanks for the install vid. Another shop in California recommended 8.5 ft pounds for the clutch cover housing bolts, which resulted in a snapped bolt.. I'm pretty sure your recommendation of 7 ft lbs is much more in line with what it should be.
@CorrupteddSanity
@CorrupteddSanity 6 жыл бұрын
Thank you. Very informative. I'm interested in a set. Any reason you took out all the clutch plates? Seems like you could've bolted the spring plate at the beginning without removing individual clutch plates?
@Studeo5150
@Studeo5150 3 жыл бұрын
He possibly took out all just to show the setup with the judder springs.
@miguel5437
@miguel5437 Жыл бұрын
Can use full friction plates and eliminate the thin ones
@dpgoverride
@dpgoverride 5 жыл бұрын
Just did the TW Clutch mod today, during my test drive I noticed engaging forward/reverse (sport shift) it now clunks harder and surges the YXZ when kicking into gear. Is this normal? I'm figuring it is now that all the clutch plates are actually wet and fully functional. Over half my clutch pack was dry when I tore it down today, 100 miles on her so far, all plates still looked good (no discoloring), dropped Maxima MTL85W in the tranny. Edit: Oh and thank you for the video, it came in handy making sure everything went back together the right way today!
@JohnJohnson-xm2tf
@JohnJohnson-xm2tf 2 жыл бұрын
Well thanks now iam going to buy an impact gun needed one any way no way am i dealing with that wire under the car great video
@mahmoodalomairi1439
@mahmoodalomairi1439 2 жыл бұрын
@shaneeastman8532
@shaneeastman8532 7 жыл бұрын
So it is a wet clutch, like a motorcycle? Great vid.
@kimbletrainer3605
@kimbletrainer3605 3 жыл бұрын
Will the competition clutch plates 11 wide, work with the oem pressure plate
@hananzubaidi5995
@hananzubaidi5995 6 жыл бұрын
hi i have yamaha yxz 1000 r ss se 2017 i want to instill heavy duty clutch wich one you recommend for my bick it’s sequential shifting NO clutch paddle thanks
@jctjh
@jctjh 6 жыл бұрын
I would like to know this answer as well....
@tree18is
@tree18is 2 жыл бұрын
Offsetting that last friction. I can't bring myself to do it
@negonenshowsantos
@negonenshowsantos 7 жыл бұрын
This upgrade is good but if you remove those last three narrow discs the clutch would get stronger especially in the plucked out as in its lifetime being able to even abuse the clutch in more locked places locked tracks gets the hint do not know how to insist on those three thin discs hug
@denisligeron7868
@denisligeron7868 9 жыл бұрын
quad
Yamaha YXZ Barnett Clutch Install
20:42
6gearz
Рет қаралды 38 М.
24 Часа в БОУЛИНГЕ !
27:03
A4
Рет қаралды 7 МЛН
Talon X weller racing spring install
10:57
Mud Puppy (MudPuppy)
Рет қаралды 6 М.
YXZ1000R Camshaft Timing & Tensioner Install v1
5:52
Hauck Power Sports
Рет қаралды 11 М.
CrawlForce Yamaha YXZ CrawlBox Install
22:59
Austin Schneider
Рет қаралды 4,9 М.
YXZ1000R Manual Clutch Operation
10:22
YamahaTechAcademy
Рет қаралды 80 М.
YXZ1000R Rekluse Auto-clutch Installation
12:40
YamahaTechAcademy
Рет қаралды 40 М.