WEN 6559 6” JOINTER, UNBOXING, SETUP, AND REVIEW

Let’s unbox, assemble and review my new WEN 6” Jointer!
I purchased this from Amazon so I can mill rough cut lumber and get perfect edges after cutting on the table saw.
The WEN 6” Jointer has 10 amps of power to be able to dress when the toughest of lumber.
This is the first Jointer I’ve used in over a decade and I could not be more pleased. The fence aligned perfectly, the depth of cut gauge is easy to read, and the built in dust collection works great!
WEN 6” Jointer 6559 amzn.to/3exNDsp
Here’s a list of other tools I use in the shop!
Kreg Pocket Hole Jig I use every day.
amzn.to/3gKLtqZ
Newest Kreg Pocket Hole Jig, that I want!
amzn.to/2PtAkQ4
WEN sanding station! amzn.to/3wgWbL9
Tacklife 3x18 Belt Sander
amzn.to/38V9RBC
Porter Cable Nail Gun Combo Kit
amzn.to/3s2byol
Black and Decker Detail Sander
amzn.to/3twEGEz
I use these sawhorses with every project I make they are awesome!
amzn.to/3c1kuE
#WEN
#6”Jointer
#Jointer
#RoughLumber
#EdgeJoint
#unboxing
#setup
#review

[@porschemons9272]

Very useful info 💯 👍

[@jumpingjacks5558]

I bought one this past winter. I absolutely love it. I went with the cast iron body. I believe it will last longer and easier to maintain.

[@geminibuilder1747]

Used mine several times, brought it over to a friends house yesterday and he’s buying one over the Porter Cable now.

[@danielsjohnnie2000]

Great review. I'm getting mine tomorrow.

[@geminibuilder1747]

That’s great let me know how you like it!

[@JoshuaWShanks]

Nice review! I've really been wanting a jointer for my meager setup. Looks like a great buy!

[@geminibuilder1747]

It really is! Get it, I doubt you'll be disappointed.

[@peterchamberlain1996]

Thank you for this review, tremendously

[@geminibuilder1747]

My pleasure!

[@MikeTheSith200]

I have the same jointer and planer. Theyre great. Need new blades on jointer though. i think i hit a nail and now it leaves a ling down the middle of every board.

[@bernarddouthit4647]

Great job! I just wish I had seen this video before i bought a Grizzly jointer that has all of the level set screws in the top of the infeed/outfeed tables. I maybe should have left them alone, but they recommend spending an hour calibrating the tables. It's now been more than four and I'm ready to send this thing back. I've noticed that some benchtop jointers like the Wen you bought have the infeed/outfeed tables basically preset and ready to go out of the box. You're right. It is a home run if all you need to do is check the fence a bit. Craftsman, Grizzly, and some other benchtop jointers have this design which I think is flawed. Thanks for making this video. I was trying to guess your accent and location and I want to say New Jersey or northern Maryland.

[@geminibuilder1747]

I'd buy this thing again if given the need, it was ready to go right out of the box! Thank you for watching!!

[@rileycrain5784]

Which grizzly did you get? I am currently looking at grizzly but there are hardly any videos or reviews about them, strange

[@stevesiefken6432]

What’s the longest workpiece you would recommend using with this jointer?

[@barretthamilton2565]

Can you tell me, how much adjusting did you have to do out of the box? Table levelling? Not too worried about the back support, more the in table/out table

[@geminibuilder1747]

Barrett thank you for watching I didn't adjust the tables at all. I was very happy with it right away.

[@duanebeyer950]

Do you still love this jointer? Looking to do small signs, so I think it would be perfect.

[@geminibuilder1747]

Sorry for the late reply, I still love it my buddy used it and was happy enough that he is buying one. It's light weight too it went easily into my car and over to his house for use.

[@seanreed6949]

How is it holding up? Still recommend it? Been debating on getting the 8” with extendable table.

[@geminibuilder1747]

Sorry haven’t been around lately. I would always recommend the buffet anything if you can 1 afford it And 2 feel you’ll need it. Always better to have it and not need it than need it and not have it!

[@Jordanwoodworking]

Have you had any issues with the fence

[@geminibuilder1747]

No issues at all sir used it for the video a few times after and even threw it in the car to let a friend use. He was impressed and is buying one. Did you have problems with yours?