The Ultimate DIY FLOAT TUBE ROD HOLDERS SETUP!

Looking for the plans to create your float Tube/Belly Boat rod holder? Well I have the Ultimate DIY Float Tube Rod Holders Set Up for my Outcast Fishcat 4 Deluxe. This design has two rod holders, phone holder, pliers & fish grips on DIY Leashes and a GoPro Boom. Everything you need to modify your Float Tube/Belly Boat.
Wendell Fishing Merch ➡️ wendellfishing... ⬅️
⬇️ CUT & MATERIALS LIST BELOW ⬇️
⏱️ TIMESTAMPS ⏱️
0:00 Intro
0:26 Modifying the FishCat 4 Deluxe
1:10 Rod Holder Design
1:26 Materials Needed
1:38 PVC Vs ABS
2:30 Cut Lengths for 1 1/2 inch PVC
3:21 Cut Length for 3 inch PVC
3:35 Cut Length for 3/4 inch PVC
3:53 Materials List
5:04 Modifying the Rod Holder
6:00 Drill holes for Leashes and Fish Grips
6:25 Drill Hole into Cap
7:35 Build the Rod Holder
9:34 Velcro to FloatTube/BellyBoat
10:26 Make Marks and Begin to Glue
11:27 Flotation Option
12:17 DIY Leashes for Pliers and Fish Grips
16:15 Attach Your Phone Holder
17:25 Test Rod in Rod Holder
17:48 Create and Attach Final Rod Holder
18:46 Add Go Pro Attachment
19:32 Video References to DIY Rod Holders for Spincast and Baitcaster Reel
🧰 MATERIALS & CUT LIST 🧰
🚣🏻‍♀️ - FishCat 4 Deluxe Float Tube: geni.us/Fishca... (Amazon)
✅ - (1) 6' - 1 1/2 PVC (Cuts Below): geni.us/PVC_Pi... (Amazon)
- (2) 11 1/2"
- (1) 10"
- (1) 9 1/2"
- (1) 8"
- (2) 6
- (3) 2"
✅ - (1) 5" Length - 3" PVC: geni.us/PVC_Pi... (Amazon)
✅ - (1) 25" Length - 3/4" PVC: geni.us/PVC_25... (Amazon)
❌ - (2) Crosses - 1 1/2" PVC: geni.us/PVC_Cross (Amazon)
✔️ - (2) 45's - 1 1/2" PVC: geni.us/PVC_45... (Amazon)
🌪️ - (2) 3" to 1 1/2" Reducers: geni.us/PVC_Re... (Amazon)
✔️ - (2) 90's - 1 1/2" PVC: geni.us/PVC_90... (Amazon)
✔️ - (1) 3/4" Cap: geni.us/PVC_Cap (Amazon)
🌳 - (1) 1 1/2" to 3/4" Bushing: (geni.us/PVC_Bu...) (Amazon)
👍🏽 - (1) 1/4" Thumb Screw: (Hardware Store)
✔️ - PVC Cement: geni.us/PVC_Ce... (Amazon)
🎞️ - Pack of 6 Velcro Straps: geni.us/Velcro... (Amazon)
🤳 - Raxfly Cup Holder Phone Holder: geni.us/Raxfly... (Amazon)
📷 - GoPro Tripod Mount Adapter: geni.us/GoPro_... (Amazon)
🧰 - Boom's Pliers: geni.us/BoomsP... (Amazon)
🐟 - Fish Grips: geni.us/9KUhQc (Amazon)
🧰 - Expanding Foam (Optional): geni.us/Expand... (Amazon)
🐖 - Old Pigtail Phone Chargers (Local Thrift Store)
🤐 - 8" Zip Ties: geni.us/ZipTies (Amazon)
🔓 - Carabiners: geni.us/6hAzQq (Amazon)
🧰 - Heat Shrink Tubes: geni.us/aqyDzP5 (Amazon)
🧰 TOOLS NEEDED 🧰
🔥 - HeatGun: geni.us/mCUaI (Amazon)
VIDEOS REFERENCED:
📽️ - DIY Rodholders for Baitcaster Video: • DIY Rod Holder for Bai...
📽️ - DIY Rodholders for Spincasters Video: • DIY ROD HOLDERS for yo...
CAMERA GEAR USED:
📸 - GoPro 7 Black: geni.us/Go_Pro_8 (Amazon)
🤳 - Manfrotto Monopod: geni.us/Manfro... (Amazon)
🦍 - Gorillapod Kit: geni.us/Joby_G... (Amazon)
🎥 - Ulanzi Go-Pro Casing: geni.us/GoPro_... (Amazon)
🎙️ - Rode Mic: geni.us/Rode_Mic (Amazon)
📷 - Gopro Chest Mount: geni.us/ChestM... (Amazon)
SOCIAL:
👍 - FACEBOOK: / wendellfishing
🕦 - TikTok: / wendellfishing
💻 - Website: www.WendellFishing.com
#WendellFishing
As an Amazon Associate I earn from qualifying purchases

[@slaytheday007]

I might need to get into Float Tubing now!

[@wendellfishing]

For sure! Can’t wait to get back out on the water!

[@darrylthehorntoadpiper]

Just did going bout Thursday for the first Tim’s at Lake Havasu with buddy🤓😎

[@monsterbass007]

Man... great video walk through. Well done!

[@wendellfishing]

Appreciate it!

[@darrylthehorntoadpiper]

Great video on using PVC but best of all was the DIY on the accessories pliers & extra rod!👍👍😎. Thanks keep the videos coming, sending to friend!

[@wendellfishing]

Right on Darryl!

[@wendellsisters]

👍

[@wendellfishing]

Thanks

[@WendellWoodworks]

Looks great 😊

[@wendellfishing]

Thanks!!!

[@thewrongguy]

Where the link to the velcro straps?

[@wendellfishing]

Here ya go boss: geni.us/Velcro_6Pack

[@joseramondelacruz9994]

Great video, do you think you can do the same setup to both side without it being to heavy?

[@wendellfishing]

At that point, weight wouldn't be your issue. I would imagine your inability to cast would especially if you are carrying additional poles.